RangeRovers.net Forum banner


  1. Not orings or crack by the screw, new heater core leak

    Range Rover Mark II / P38
    Just wanted to share this pic of an aftermarket heater core 2 ys old. I replaced it with a oem valeo from a low milage Range Rover. The Valeo model was much heavier and solid than the aftermarket. You can see that the aftermarket developed cracks around the orings, mabey from bumping the pipes...
  2. Missing screw under the front bumper - can someone help?

    Range Rover Mark IV / L405
    Hi Guys, Just noticed that a screw holding up the plastic piece under the front bumper (anyone know what thats called?) came out so one side is kinda hanging low. Ideally i'd like to get that fixed up myself instead of waiting all weekend and then sending to the service center. Below is a pic...
  3. Expansion tank bleeder screw

    Range Rover Sport / L320
    Hello. Just found out my bleeder screw on top of my expansion is leaking coolant, and I am nowhere near a repair shop of any kind. Is there a quick fix I can do in the meantime? About 300 miles from home and all the stores are closed. Any feedback will be greatly appreciated. Thanks!
  4. 98 P38 Brake rotor screw?

    Range Rover Mark II / P38
    I replaced the left front brake rotor today and the rotor screw stripped out. I'll replace the right rotor tomorrow. Where do you find rotor screw? I may need two.
  5. Lower control arm part number

    Range Rover Mark III / L322
    Im starting to see that when it comes down to using Google to answer questions for Range Rovers...it's literally one of the most daunting, vague tasks you can be assigned. I've been all over the net since these parts came in and maybe it was an oversight during purchase but im not 100% sure the...
  6. Compressor rebuild, Piston screw?

    Range Rover Mark II / P38
    Hi all After removing the allen screw to get to the screw holding the piston in place I am stuck. The screw inside the hole does not look like anything I've seen before. I tried to get a picture into the hole to show what it looks like, anyone that can spread som light on this or has my...
  7. Does a the LR021777 radiator have a drain screw

    Range Rover Sport / L320
    I just replaced the radiator on my 2006 range rover sport SC. I bought a geniune LR021777, but it doesnt seam to have a thread for the drain screw. I took the drain screw out the old one but it wont fit in the new one. It is just pluged off and no longer removeable in the new one, or some kind...
  8. GEMS throttle plate adjustment grub screw

    Range Rover Mark II / P38
    Hi I am working on getting my idle and pickup smoother after fitting a Tornado chip Reading this thread http://www.rangerovers.net/forum/7-range-rover-mark-ii-p38/198370-97-p38-q-4-6l-gems-runs-rough-after-closed-loop-3.html It seems I need to get my TPS to around 0.6 to 0.65 at idle (mine...
  9. Gear Lever Grub Screw Size

    Range Rover Mark II / P38
    Anybody know what size the grub screw is for the gear selector handle? Purchased one that didn't come with the screw and need to find a replacement. Don't think it matters, but it's for a 2001 HSE. Thanks!
  10. Steering wheel play - Tighten set screw? Ball Joints

    Range Rover Mark III / L322
    Hi all, I'm having some play in my steering wheel, at all speeds. When the vehicle is parked, I could easily turn the steering wheel back and force for about half an inch on each side without feeling any resistance. Surely the front wheels do not move. At low speeds the play is still there but...
  11. O Ring Screw Aggravation

    Range Rover Mark II / P38
    All I've been struggling for the past 2 hours trying to finesse the o ring screw out without stripping the head. I'm using a 16 inch #2 Phillips and attempting to extract the screw through the the vacated Hvac panel. The screw moves a very little bit but as soon as I start to try to turn it...
  12. Freeing Blend Motors with s/t screw. Pics anyone?

    Range Rover Mark II / P38
    First all, not looking to beat a dead horse, but I got the one side hot, one side cold problem. I am hoping to free up the blend flaps with a self tapping screw. There is an excellent thread that, at one time, had pictures of the process, but the pictures are dead. Dos anyone have maybe an...
  13. I've got a screw loose....

    Range Rover Sport II / L494
    I found it in the cargo area and it definitely came from the vehicle. Seemed to be on the drivers side. Its about an inch long with a phillips head. I didn't see any empty holes anywhere nearby. I am taking it to the dealer soon anyway but if I can find out where it goes I don't mind...
  14. Rear Windscreen Screw Size?

    Range Rover Classic
    Without having the ability to take my rear windscreen into a hardware store, does anyone know what size the screws are? Thanks
  15. Heater o-ring screw part number

    Range Rover Mark II / P38
    Hi, I'm looking for the screw part number but can't find it on Microcat or on google. May you help me? Thanks Florent
  16. Is the shop trying to screw me? (fuel pump issue)

    Range Rover Mark III / L322
    2004 RR, ~99,000 miles. Only replacements so far were the water pump, rebuilt alternator, & air spring. I was driving it the other day, and it died on me driving down the road. Was able to start it up to get where I was going (another mile), but it died again on me when I parked it. Couldn't...
  17. P38 battery cover - diameter of twist screw lock fixing??

    Range Rover Mark II / P38
    The starlock washer on 1 of the battery cover twist locks has gone awol (got the 'screw' and the spring....) Measured and thought it was 5mm nope the 8mm i have in the box are way too large - so as my measuriing skills are obviously naff can someone confirm the shaft diameter please 6mm or 7mm...
  18. 2008 HSE headlight adjustment screw location

    Range Rover Mark III / L322
    I need to adjust my headlights (too low) on my 2008 HSE. Does anybody know where you can find the adjustment screws? Thanks, Keith
  19. Broken Screw In Throttle Body

    Range Rover Sport / L320
    Hey guys, i was cleaning my throttle body and sheared a screw in the elbow housing on the bottom left. So now i only have three screws holding it. What kind of damage can this cause if air gets into the engine or should i be fine with three screws? Is there an easy way to try to get the screw...
  20. License Plate Light Cover Replacement part # and tailgate screw size

    Range Rover Mark III / L322
    License Plate Light Cover Replacement part # and tailgate screw size I have searched and could not find an appropriate post here and I could not find a part # online.... I tried searching for the numbers and letters that appear on the cover (0LSA-0462800 and SAE L 01 D 01 and 58915 C5W) I...