running

Need some help with my 06 l322 Range Rover. I already installed Johnson rods for 2” lift but notice this pointy piece of suspension component and the cylinder itself of front suspension strut which would appear to prohibit larger tires. Any tips?

2003 L322 Vogue 65,000+ Air / Fan noise still running after shutdown after 2 hours!

2003 vogue 65,000+ came home. shutoff engine. fan noise continues. neighbour just told me it's still running after 2 hours! i have no idea but to pull some fuses. Help!

Who has run 'old' Range Rover wheels on an L322? I really like P38 wheels, and newer LR3 wheels. Examples: https://www.hubcaphaven.com/p/7516/aly72146a20-range-rover-lr-discovery-wheel-silver-anr6316mnh.html...

I came across this info some time ago but completely forgot about it. Maybe its common knowledge but I have never used it. (it applies to most EAS Land Rovers that use a smart key. I have tried it on a 2011 L322 and a 2010 Discovery/ LR4 but do not know if it works on later models) Enter...

Just officially joining but using forum since 2008. Still working with P38 '99, P38 '98, HSE Super '03

Saw a strange issue on my '06 RRS S/C yesterday - I drove out 40-50 miles to the mountains, then hit some deep-ish snow, using snow mode, then got back on pavement, turned off snow mode, and on the highway the engine didn't want to keep warm - I could manually regulate it by downshifting. A few...

Hi Everyone - sorry for the noob question. I did a search but couldn’t find the answer (although I found some excellent threads on other topics). We bought our 2012 LR4 several years ago and we are looking at getting a L494 now. One thing I got burned on with the LR4 was I didn’t realize the...

Hello, I am doing some trouble shooting try to figure out why my bank 2 is running lean. So when I was replacing the spark plugs I look all over the fuel rail and can not find a Schrader valve ANYWHERE other than the AC system to check my fuel pressure . and do not see if on the code scanners I...

Recently, my compressor kicks on but the air tank is not filling up but it's also not losing air unless I lower or raise the truck. I have a gauge so I know this isn't happening. I have confirmed the following The compressor is making good air and was rebuilt Pressure switch is new and works No...

I purchased a set of Land Rover fixed side steps for my 2016 RR Sport. Unfortunately, I appear to be a bit illiterate in instruction by diagram, as I find the included instructions a bit confusing. Anyone have any written instruction or a link to a video? Thanks

Ok so just bought a 08 range rover sport hse from auction. I had to replace the front air stut due to leaking bag and was getting the red suspension fault 30 mph and dropped all the air. So replaced the bag and hear no leaks now but after replacing the bag im getting a yellow suspension fault...

Looking to free some space under the driver's seat... if I'm not running ABS (fuse is pulled), can I remove the WABCO unit or will I create an electrical / computer nightmare?

hi guys, so i have a weird problem going on with my 04 rover. The air compressor will run continuosly but it will only lift the rear left wheel and then throw a suspension inactive. I checked the live data using my handheld and it shows that only the left rear valve bellow is opening. Everything...

Hey everyone , decided to give the engine bay a clean today, and after I was all finished up I started the Range Rover...... And now it's running rough at idle, and while in drive. It shakes a subtle amount when in park, and proceeds to increase the severity of the shake when the Range Rover...

So we picked up the 2008 rover Friday night, made for a long day. 10 hours total driving and a couple st the car lot. Do it has the fixed running boards and so far everyone has managed to kick them with the shins. Wife says get them off. They’re not bad looking but my shins say gotta go as well...

My truck has been parked for almost a month because I couldnot get it past the bad-amplifier symptoms it was exhibiting, and I justreturned an amplifier I bought that was DEFINITELY BAD out of the box. I havemany other projects going on, so this one was going to sit until I bought yetanother amp...

Got sick of kids and wife complaining about the ingress-egress so installed some cheap but great looking running boards off of ebay. Got them for just $240. Installation didnt cost me a dime. I already had a 3 ton jack and used a small crow bar for the plastic pins. Used crappy hand tools... so...

'93 LWB with a history of dizzy/IAM issues. After dis-connecting every part of the remote IAM on the Left fender, cleaning all the corrosion at every point of contact (I thought that was the problem; lots of corrosion where the IAM mounting plate mounts to the fender, and where the engine ground...

I see on ebay they are from 2000-3500 that sounds crazy, do you know better options to get it cheaper? Thank you.