Range Rovers Forum banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-9 of 9 Results
  1. Range Rover Mark III / L322
    Hi guys I’m finishing up a timing job on my 05 Range Rover with 4.4 m62 engine. As the title says, I’m leaning towards deleting the injector plug metal retaining clips to make future removal easier. Those things are such a pain in the butt to remove with a pick tool. I figure since the injector...
  2. Range Rover Mark II / P38
    Does anyone know the part number of this pin that holds the dog guard to the ceiling mount?
  3. Range Rover Mark III / L322
    Here is a strange one. Doing the rear brakes on my 2007 RR SC. One wheel jacked, car in neutral. Parking brake adjuster backed all the way out. Hub will spin with some effort when rotor is not on. Same with rotor resting on lugs. Same with rotor retaining screw/bolt slightly loose. Once...
  4. Range Rover Mark III / L322
    I have an 06 RR HSE. Im NOT concerned with retaining ANY of the MOST system. I plan on taking it all out. I would like to know if i use an Android replacement head unit can it retain the steering wheel controls? Do the steering wheel controls in a 06 operate off of the factory headunit or have...
  5. Range Rover Mark III / L322
    I want to remove the A pillar outside trim. I noticed a PO used a different plastic retaining pin. I assume the one that does not sit flush is the non OEM replacement. Can this cause and issues with the door seal? Thanks.
  6. Range Rover Mark III / L322
    I am trying to change from brake pads on 2007 RR SC The Brembo calipers have 2 pins retaining the pads in place Lower pin comes out with a little punch Upper pin refuses to budge. I have soaked it with WD40 every half hour all day then try it again with a nail punch to no avail. I have broken...
  7. Range Rover Mark II / P38
    Little help please. How do I get the retaining ring off the top of the fuel pump. The black six inch ring. Mine is metal. Tried unscrewing it like in one set of instructions, which I thought was madness just looking at it, then tried to pry it like other posts say. A Few pointers and tips would...
  8. Range Rover Mark III / L322
    Can anyone describe how to get it off? I read a drift and hammer but still cant figure it out. Thanks
  9. Range Rover Mark II / P38
    Help! I've read the excellent how-to on this site, one side was simple, air bag removed with no issues at all. The other side is proving more problematical. The retaining pin for the front airbag seems to be really solidly stuck. I've tried wiggling, pulling, tugging, brute force, brute force...
1-9 of 9 Results
Top