RangeRovers.net Forum banner

resync

  1. How do I re-sync my key fob

    Range Rover Evoque / L538
    Hi all I have a 2013 Evoque and the fob buttons don't lock or unlock the car. The car starts fine and it opens when I approach it with the keys in hand but it just wont lock or unlock it. I have to lock it manually on the passenger side. I spoke to someone who thinks it's just out of sync...
  2. Resync. Yes or no?

    Range Rover Mark II / P38
    Hi I have a NAS 2002 P38 petrol. I just replaced the positive battery cables with the factory harness. Now the truck won’t start. The 40A fuse to the starter motor is fine. Resync W’s the key fob with the door turn lock and unlock truck. Truck now locks and unclocks with the key fob. I reset all...
  3. Keyfob Resync - no method works

    Range Rover Mark III / L322
    I have a L322 2007. Its got folding blade keyfobs and the ignition key is in the dash not in the console. I know there are a number of instructions posted on how to resync the keyfobs but nothing seems to work. I recently left the lights on and flattened the battery. Prior to this everything...
  4. P38 Key Resync

    Range Rover Mark II / P38
    Hi have just replaced the outer shell of my Key, the old one that came with the car had no loop on to tie to keys and buttons were worn through. I swapped over everything that wasn't plastic so in therory I should be able to recode the key in the drivers door. As I only have the one key I have...
  5. Nanocom Motronic immobilization code: 3-digit or 4-digit?

    Range Rover Mark II / P38
    My 2000 Range Rover (US model) lost ECU-BECM sync (P1674 at each start attempt) within the first few hours of me owning it, and I'm thousands of miles from a dealer. I have a Nanocom. However, in the Motronic menu, the Nanocom shows the immobilization code is 2150, while in the Alarm menu, it...
  6. Resync key fob (I know, not another fob thread) tried the usual methods.

    Range Rover Mark II / P38
    Resync key fob (I know, not another fob thread) tried the usual methods. Hello all, I'read the threads on this and many other owner forums but have still been unable to snyc any of the two keys. Some background. This is my second MK2 and I bought it not long after it had...
  7. Engine Re-Sync

    Range Rover Mark II / P38
    Hi all, About a month ago i bought a BBS Sync Mate for my 4.6 1997 GEMS Range Rover, because i had a problem with the BECM loosing my engine start codes. Which i was told by people on here that if i don't see the CHECK ENGINE light when i turn on the ignition it meant that the BECM...
Top