release

The latest release notes for InControl Touch Pro (Duo) 19A, enjoy IMC (INFOTAINMENT MASTER CONTROLLER) – SOFTWARE VERSION: S19A_19.07.2-312706, PART NUMBER: K8A2-19C204-BB (G2369115) INCONTROL© TOUCH PRO 19A Release Date: 2019-02-27 New features included in this release DRIVER ASSISTANCE...

Hey Folks, I recently pulled the lever to release the hood on my 2010 HSE and I heard and felt something break. Upon inspection, I realized that the cable is fine, and the lever itself is fine, but there is a small plastic cam mechanism that holds a spring that the cable actually slides into...

Hello, I am hoping that someone can tell me where the emergency handbrake release is on my L320 RR Sport 2012. All of the You Tube clips seem to show a different center console setup. I have taken the handbrake switch out and I can't see it anywhere under there. Any ideas? Thank you

The upper tailgate release button will not work on my 2013 Range Rover HSE, any ideas??

A very cheap option $10 fleebay....small enough you can tuck it in there and it will never see the elements....once setup, even if you loose power it retains the simple latching config you plug in there.... and I just left the old button in place......just an option I thought I would share.

Fellow Rangey devotees I am hoping beyond hope that someone out there can help me. I have recently purchased a 2013 RR Autobiography 5.0 V8 supercharged and I absolutely love it, the power and performance is earth shattering. My issue, which by the way is sending my mild OCD into overdrive...

Hi fellow forum members. I have a 2008 RR HSE and the other day tried to lower the center rear armrest to use the cupholders and noticed the release switch is loose. Does anyone have any tips on how to take this ting apart and fix? I don't see any screws anywhere (it looks like a sandwich so If...

Told by a dealer here in Ontario that vehicles have arrived in Halifax but they are being kept for a launch day event first week of September, they did not know the exact date. Anyone have further details?? Originally I was told the Velar I was interested in would be arriving around 11 August.

I spoke with the dealer yesterday and they are expecting the build sheet will be released in August. They are confident it will come with the dual touchscreens similar to those in the Velar. They couldn't confirm whether or not it will come with a full LED headlight option.

Hi all, does anyone know how to manually disengage the electronic parking brake? On vehicle start, I am getting an error suggesting I "calibrate" my EPB by putting it on and off (together with foot brake use), does not go away, parking brake does not disengage. Feels kind of silly to call...

Any idea when the 2018 model year will start production? Is it normally July/August or is it later in the year ? I'm looking for something in September and didn't know if I would be getting a 2017 or 2018.

Hey guys, Ive searched and cannot find much information about releasing the rear brakes on my 2015 range rover AB. The front breaks were a breeze but the rears cannot be changed until I can find the process(that works) to put the vehicle in service mode. Thank you in advance

For some time my upper tailgate would not open. Removed the switch and the rubber boot to discover bad corrosion on the aluminium bar that activates the microswitch. Both the end hinge pins had corroded away, leaving the alu bar loose inside the switch housing. My fix was to clean the bar from...

The handle to release the bonnet on my '01 snapped in half and I have a new one to replace it. I have removed the dead pedal (3 bolts) and one screw above it holding the plastic cover on that surrounds the release latch, but having trouble getting this plastic cover off. It is loose, but can't...

I have a 2003 Range Rover, and the hood release cable has just broken under the hood. After reading some forums I have taken the interior apart and the handle and cable on the inside are fine. Does anyone know of a sly way of being able to release the hood at all? The engine has a small oil...

I am preparing for the arrival of my 2008 SC car which is disabled due to electrical issues. The fuse box has been removed so the electrical system is totally dead and I am unsure of whether the EPB is engaged or not. It may need to be released manualy but have I been unable to find an accurate...

the passenger side rear seat release has broken and I can't fold the seat down. Is there a way to release manually? anybody know where to get the replacement parts? Thank you in advance for your response

Hi everyone, need some help here. My bonnet(Hood) release cable broke at the lever end. Purchased and fitted a new cable, following the instructions in a previous thread. My problen is the bonnet will not open when I lift the lever. Looking at the connection to the lever the cable is slack. Is...

Hello all, The glass hatch release switch on our Range Rover is not working. Reading online, I see that the hatch needs to be opened in order to replace the switch. The keyfobs are set up to do other stuff. Any ideas on how to change the switch?

On the longer side of the rear seat. Is there a manual way to get this side of the seat down? I tried pushing down into the button hole with a screw driver, but no luck! Anyone have experience replacing the actual button? Gonna be moving soon and I need to get full use of the cargo area. Cheers...