Range Rovers Forum banner
reach
1-7 of 9 Results
  1. Range Rover Mark III / L322
    Hi all, well I’m in need of some help. Just bought a reach motor, driveshaft spindle and nylon mounting bracket. As there was not a reach motor when I bought the RRV I’m not sure how to fit, unlike the tilt motor all done in 5 minutes, so is there a set way to assemble and fit, as there not much...
  2. Range Rover Mark II / P38
    Here's the story. Truck needs consistent refills at reservoir. Been just using distilled water. I feel as though by now it's a system with nothing but water. It's now cold in Texas. It wont reach operating temp. Stays in the blue or just above. Do I add green or orange coolant. And what...
  3. Range Rover Mark III / L322
    Does anyone out there know where I can get the flex shaft for the steering reach motor. After checking with the Land Rover Dealer I found you can buy the reach motor but not the flex shaft that connects it to the worn gear. I got under the dash to find out why my motor was not working and found...
  4. Range Rover Mark III / L322
    Hello Everyone, I have searched Long and hard on the Forums and Google but cannot seem to find a direct answer. On my 2003 l322 i have a broken White Nylon Clip for the steering reach Motor. Everything else is in order, except the broken Clip. The Motor was still in Position with half of the...
  5. Range Rover Mark III / L322
    Dear all, Since I purchased my 2004 RR there was no reach adjustment of the steering wheel, just noises.... Today I took a minute to check what was going on and of course the reach motor is just sitting above the pedals in the trim.... Broken white nylon clip! Everything else seems to be...
  6. Range Rover Mark II / P38
    Hi All, What with the hot weather starting to bite, I must replace the RH recirculation flap motor. (the LH is fine). When both flaps are closed, the a/c is noticeably cooler. Now, I have the spare recirc. motor, another fan to fit whilst I'm there, but last night I had a brainwave (wait for...
  7. Range Rover Mark III / L322
    Gentlemen, you know the problem with the defect reach motor (telescope, in and out), I solve this problem with a new industrial nut, also in hard-pvc, look at the picture, if you don´t want, that your airbag exploses on your knees in fall of an accident..., best regards, Uli
1-7 of 9 Results
Top