Search Results for ‘pulling’

hi everyone first post on here. I work on a friends 2011 l322 4.4 tdv8 and we have had a long ongoing issue with the car wanting to constantly pull left.* I have replaced every suspension arm, bush and ball joint front and rear.* I have calibrated the suspension with the GAP IID tool.* I have...

New to the Forum but not new to Rovers. Full Euro Line Technician . I Purchased a 2003 Range Rover HSE 4.4 this past winter. I Bought it from the original owner. Engine seized on it and I got it for next to nothing. It has a brand new trans (6000 miles on it). Bags have all been replaced in...

I brought my 2017 in for service a few months ago and they asked me if I wanted the updated software and I said that I did. Now my main screen looks like the 2019s, which is nice, but I have an issue where some of the presets are set to an image file - the artwork from the channel that is...

Morning all, Not long had my RRS, i jumped in this morning to go to work and pulling away there is no power at all. If i put my foot to the floor it picks up just over 2000RPM im guessing when the turbo kicks in, guessing maybe throttle position sensor or something similar? Any ideas?

My 1998 4.6 HSE made it to Denver, from Detroit and now has no torque - pulling a UHaul trailer. What reasons come to mind?

Expecting my HSE Dynamic in about a week and was cruising through the HSE Dynamic Build page for 2017 which wasn't available to me in November when I ordered my vehicle. It looks like the HSE Dynamic NOW comes standard with the LR 250w system. :naughty: I had mine built back in November and...

Hello all - Thanks for all the help. I'm close to pulling the tigger on 2016 RRS ATB vs. SCDynamic. I live 120 miles from the LR dealership. I'm worried about reliability. Has LR improved on this? Are people having problems with the new RRS? thanks!!!!

Hi -- I tried to open my hood this morning to re-connect my battery and it did not budge. I removed the handle and pulled the cable (hard -- several times) using pliers -- to no avail. I tried pulling and pushing hard on the hood and nothing happens. Does anyone have advice on how I can open...

hi Guys, I am new to the forum and still fairly new to owning my first Range Rover. About 4 months ago I had a message transmission failsafe program and the vehicle was stuck in 3rd or 4th gear I guess. After turning the ignition off then back on the issue resolved. About 3 weeks later the same...

Ok so I'm up against the worst electrical gremlin ever (well, in the life of my rover anyhow). If the truck sits 2-3 days the battery runs completely flat. So flat, in fact, that the interior lights wont come on or ignition unlock, as if there is no battery installed. I've gotten in the habit...

Front bumper fitting - psgr side pulling away from fender clip Passenger side of my front bumper sometimes hangs out of the clips that should be holding it affixed to the front fender. I can see the hole in the bumper attachment that should be clipped onto the fender with some type of peg or...

Hi, I have read almost every thread on this forum pertaining to the numerous issues I've had with my 2003 L322 (180,000) since purchasing it, but I am no longer making progress. With that being said, I have decided to register and ask for help. This truck is driving me crazy, and I am out of...

2011 RRS pulls hard right under hard acceleration and back left when lifting off... Hello everybody, I just purchased a 2011 RRS HSE with 26K mls. Love the ride but am concerned with the right pull under hard acceleration. Under normal circumstances driving at a sustainable speed, whether...

Hi I have a P35 R/R. 1996 P reg in the uk, Son in law pulled out the fuse`s to check them after the radio went dead. He pulled the fuse for the becm, After messing around and locking the engine out we put the key code back in, But the car has no drive, The car rolls in park, the engine is a BMW...

My radio cuts out intermittently, sometimes for months at a time, sometimes for minutes. Before taking it in, I thought I would pull the radio to see if it could be as simple as some loose wiring (let the laughter begin...). Any tips on pulling the radio, or on resolving this issue. Thanks!

My Radio seems to have a short in it.  It works intermittently, sometimes working and not for months at a time.  Bumps in the road seem to trigger it.  I'd like to pull it to see if it could be as simple as loose connections.  (let the laughter begin)  any advice on how to pull the radio?  Thanks

Apologies for the poor quality video in advance.Pulled the motor yesterday ready for rebuild.Heart stopped when the motor broke free because of the sound it made lol. http://youtu.be/bKY7Bp-Lal0

I have the MkIII All Comms device and was wondering how one pulls error codes for the MkIII. I have used it to clear faults and adjust settings in the past, but not to pull an error code per se. I am getting a "Service Engine Soon" message. The vehicle is hesitating under power and...

Hello Rovers, :oops:I am afraid I burnt something that is stopping obdII from communicating with state dmv.