Range Rovers Forum banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-3 of 3 Results
  1. Range Rover Mark II / P38
    Hi guys I’m doing a head gasket replacement on my 4.6 and at the stage when the heads are back from the machine shop and I’m about to refit them. I know I need to clean the block face really well before putting the gasket and heads on, and was going to use fine wet & dry sandpaper. But …...
  2. Range Rover Mark II / P38
    4.0 noises are scaring me, prepare me for the worst (or best) Hi folks, my 4.0 P38 is the first Range Rover I've owned, the first V8 I've owned and the first petrol-engined vehicle I've driven in years. It has a tappy noise. It doesn't seem to be using water, the tappy noise is at half engine...
  3. Range Rover Mark III / L322
    Front control arm/ball joint replacement, information to prepare As I was having a hard time finding all answers upfront to prepare for replacing my '05 HSE front control arms and balljoints, I figured I should provide more from my experience here: - Replacing all 4 control arms and 2...
1-3 of 3 Results