RangeRovers.net Forum banner

position

  1. M62 4.4 Camshaft Position Sensor

    Range Rover Mark III / L322
    I've bought two CPS (BBR Automotive Germany) to replace the current CPS of my RR. It's an easy job to do at home? Is there a guideon how to proceed? After replacing the sensors there is clean code needed? I found this guide for a BMW 540i E39...
  2. CamShaft Position Sensor "LR014372"

    Range Rover Sport II / L494
    Hi Do-It-Yourself, I need a Picture or Video or a very good description of the Location of the "CamShaft Position Sensor "LR014372" on a 2016 Sport SC. Is the sensor on top or bottom or inside the engine? From the YouTube videos so far, I suspect it is at the bottom, but I'm not sure, because...
  3. throttle position

    Range Rover Sport / L320
    RRS Supercharged, 2012 Been running a custom tune with supercharger overdrive pulley for about 2 years. I am trying to troubleshoot an issue - a little difficult to describe. Symptom: when I go WOT, it feels like I have to ease off a little and then reapply throttle before I actually get...
  4. Crankshaft Position Sensor

    Range Rover Sport / L320
    I have a 2006 L320 with transmission problems, or so I thought. Drove it to a local transmission shop and was told that the only problem the computer showed was a "cam position sensor" The tech told me to first fix this problem and see if that solved my transmission slipping problem. I looked...
  5. Crankshaft position sensor - quick fitting question

    Range Rover Mark II / P38
    Hi, I've had to replace the CPS on my HSE 4.6 Gems (no spark, no fuel and a very bent pin on the CPS!)- its the type with a flying lead and blue connector (Lucas SEB805) I've checked the ring teeth through the access cover when fitting it just to be sure, and done a manual rotation of the...
  6. Noise From Rear When Accelerating From A Stopped Position

    Range Rover Mark III / L322
    I am having a clunking sound from my rear that sounds its coming from the middle of the rear axles. It doesnt happen all the time. It seems to happen when I accelerate somewhat rapidly from a stopped position. If I accelerate slowly from a stopped position it seems to not happen. Any ideas...
  7. GEMS - 5V supply to Throttle Position Sensor has me stumped

    Range Rover Mark II / P38
    My GEMS P38 has been having idle problems off and on. I let it sit fo 3 or 4 months and now it won't idle at all. Started to do some basic diagnosis - the nanocom says TPS voltage is only .02v. Basically 0. So I back probe the TPS connector, and realize it's not getting 5V at the connector...
  8. Camshaft Position Sensor Codes - Not Starting

    Range Rover Mark III / L322
    Hi My 2005 L322 Supercharged is a non-starter. ECU is showing P0340 and P0345 which indicate an issue with the Camshaft Position Sensor. Some of the reading I've done around this suggest the fix may not be as simple as replacing the faulty sensor(s). Does anyone have any experience of the...
  9. Stowage position connector RRC 1988

    Range Rover Classic
    What is the storage position connector on the firewall next to relays actually do? Also when starting my Tach seems to work but after starting Tach does not work, Thanks
  10. Headlight stuck in low position

    Range Rover Mark III / L322
    I have a 2006 RR Supercharged with the AFS headlights. I replaced the headlights around 6 months ago, as my original ones were faded beyond what a restoration kit could fix. I've begun noticing that the driver's side is dipped probably 10 inches lower than where the passenger side beam hits...
  11. STuck Right Rear Window in Down position

    Range Rover Mark III / L322
    sorry to ask this. can someone find me a link to a helpful discussion regarding right rear window stuck for a 2007 range rover l322.
  12. Error P0340 - Camshaft Position Sensor "A" Circuit

    Range Rover Mark II / P38
    Fellow P38'rs, I've already done a bunch of work getting to where I am in this post clearing several previous codes etc... The only major replacement I have done was a new MAF sensor, otherwise all other work has been general maintenance and cleaning. My major problems have been intermittent...
  13. camshaft position sensor on 2000 range rover 4.0

    Range Rover Mark II / P38
    Can anyone have any pics or any idea where i must looking for camshaft position sensor on 2000 range rover 4.0 ?
  14. Telescopic steering wheel stuck in most retracted position

    Range Rover Mark III / L322
    Hi. I got into my '03 RR HSE today and the steering wheel was stuck in the most retracted position. I goes up and down, just not telescope. I can hear motor wanting to go, just doesn't move. I want to take off the black plastic cover on the steering column to take a better look, but since it...
  15. What should the throttle position % be at idle?

    Range Rover Sport / L320
    I am getting 13%- with my other cars it was around 3%, so I am a little concerned.
  16. Seating position and side view mirror memory

    Range Rover Mark IV / L405
    Hi folks! Just got an 2016 HSE and am loving it (Fuji white on ebony). Question for you guys/gals - every now and then when I return to the car my memory seating/mirror positions are off and I would have to recall it using the memory buttons. Anyone with insights on why this is happening...
  17. Driver seating position - RR Sport vs. RR full-size

    Range Rover Mark IV / L405
    I'm concerned! Keep in mind, I know the best answer to the question about I'm to ask is to sit in AND DRIVE the trucks I'm asking about. I've owned two, RR full-size in the past (2008 L322 and 2010 L322), and one of my favorite aspects of the trucks was the high, commanding, driving...
  18. Driver seating position - RR Sport vs. RR full-size

    Range Rover Sport II / L494
    I'm concerned! Keep in mind, I know the best answer to the question about I'm to ask is to sit in AND DRIVE the trucks I'm asking about. I've owned two, RR full-size in the past (2008 L322 and 2010 L322), and one of my favorite aspects of the trucks was the high, commanding, driving...
  19. Maybe the leak is not the Rear Main Seal?!?

    Range Rover Mark III / L322
    I have a pretty nasty oil leak accumulating on the subframe that is below where the engine and transmission meet. After thoroughly cleaning the undercarriage, I drove a few miles, parked the truck, and waited a few hours. I just went under it and I can see that there is fluid coming from a...
  20. Ignition Barrel Replacement (position 2 not possible)

    Range Rover Mark II / P38
    Hi Folks, New to the forums here, but have found all of your information incredibly helpful so far! I´m stuck with the dreaded sticking ignition barrel on my 1997 2.5dse RR. I´ve disconnected the igntion switch from the barrel (so that I can at least start the thing in the mean time). The...
Top