Range Rovers Forum banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-7 of 7 Results
  1. Range Rover Mark II / P38
    I have had a pleasant day in my new shop building working on the front end of "Bolt" (2002 White) Replaced all of the front end bushings except Pan Hard Rod. Got some nice ones on Ebay. 80 bucks complete and all hardware was British, rubber parts were good looking Indian made. I have been aware...
  2. Range Rover Classic
    Ok time to replace all the bushings in my 88 RRC. I figure I want to go with poly, anyone have any experience with these guys, and this kit? https://floflex.co.uk/product/land-rover-discovery-1-range-rover-1986-full-suspension-chassis-bush-kit/
  3. Range Rover Classic
    I have a friend selling the poly bushings already installed on the radius arms and panhard rod (so no need to install bushings, just swap in the arms and rod) for not much money. Are poly bushings worth doing? Seems kinda counter intuitive for off road where we usually want more give in the...
  4. Range Rover Mark III / L322
    I'm wondering if anyone has insight in how to refinish the poly brushwrap on my '09. I wanted to remove it altogether but it has the headlight guards as well and they are supported by a bracket that required 2 holes on each fender to be drilled. I would rather not have bodywork and paintwork...
  5. Range Rover Mark II / P38
    Hi, i got a bit of play in my steering so i have ordered a new track rod and drag link bar, the ball joints in the hubs are only 6 months old and have no play, my Range Rover has covered 158000 miles so i would imagine the bushes are pretty worn. Do i replace the bushes with standard ones or...
  6. Range Rover Sport / L320
    I've got a set of poly swaybar bushing on the way and looking for a little advise. My '06 SC w/DR had new front bushings installed at the dealer last June. By November the clunking was back. Now I've got cluncking both front and rear. I've read through the posts about doing the front...
  7. Range Rover Sport / L320
    I recently had polyurethane bushings from polybush.co.uk installed on my RRS S/C and I am thrilled. It's a great upgrade over the OEM rubber ones and I expect a longer life from them. It completely solved the stomach-churning clunks from underneath my truck and eliminated the squeaking. My...
1-7 of 7 Results
Top