Range Rovers Forum banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-5 of 5 Results
  1. Range Rover Sport / L320
    Hi all, I have decided that for preventive maintenance and to get rid of an annoying squeak, I am going to change out the front sway bar bushings and links on Reggie, the 2010 RRS SC. At the same time I am going to replace the DSC filter and fluid. My question is this, when replacing the sway...
  2. Range Rover Mark III / L322
    Hello Everyone, My 06 Range Rover HSE is up to its schenanigans again. It is only throwing the error code P0174, and there is a slight odor of what smells like exhaust that comes through the vents and shows up intermittently when at a stop light. I will be replacing all my spark plugs (Was...
  3. Range Rover Sport / L320
    Is changing Brembo brake pads any different from a standard set of calipers? Any tips or advice is appreciated
  4. Range Rover Mark II / P38
    I have an EAS issue where the truck leans to the right when parked overnight. Rebuild the valve block with new seals and the issue remains. Just not to confuse anyone, I rewired the fuse block to power the EAS circuit when the ignition is on (hence the right lean). This way, I can remove self...
  5. Forum Guidelines
    WELCOME TO THE RANGEROVERS.NET FORUMS! Here are a few tips and pointers that we hope will help give you the best possible experience participating in this online community. LOOK BEFORE YOU ASK: Before you ask a question, you should use the SEARCH function to find existing forum posts for your...
1-5 of 5 Results