Search Results for ‘plastic’

I recently changed my front cigarette lighter socket on my 2005 Range Rover. Including that green plastic bezel around it. It had shorted out so I changed the fuse, but that plastic bezel also was broken so the socket was loosely moving around when trying to use it. I ‘think’ I remember that...

Hello all, I recently bought a 2014 RRS v8 Dynamic, always been a RR fan, figured I'd get in on one cheap. So far so good, it has needed front and lower control arms replaced and the passenger front door and rear driver door actuators are in the process of being replaced. Odd for a car with...

Hi guys, Does any of you know how to remove the front seat plastic back cover? Or, those of you with access to Topix, would you mind taking a look? The only thing I was able to find was a YouTube video of a 2006 FSRR, which didn't help much. Thanks in advance for your help! Jose

I took off the plastic steering column surround on my 1991 RRC. It has two plastic bits - one on each side of the steering wheel. The one on the left tucks away behind the dash. The one on the right sticks out slightly. Just wondering if this is normal. I can’t seem to get the right side tucked...

Tail Light Retention Black Plastic Socket-Name & Part # Pls I hate to waste everybody's time but I have flailed around for over an hour and can't find an answer. I have a 2006 S/C. The rear taillights are affixed to the body with two (2) 10mm bolts and two (2) black plastic sockets per side...

Hey guys, I have tried the Land Rover dealer and junkyards as well with no love. I need to find the plastic cover that seals the cabin filter. Being the brute that I am, I broke one of the tabs that hold it on. I can post a pic but I suspect folks know exactly what I'm referring to. It's a...

Hey y'all, I just bought a 2016 RRS supercharged dynamic. Love the thing. Had about 8k miles on it. Only question or concern is that when i hit certain bumps in the road I get a random tiny plastic creak noise from the dashboard. Sometimes I think its from around the heads up display area...

Was finally able to locate a brushguard close to me that was useable. It came with the mount bracket for the optional Safari 5000 lamps. NOS lamp kits seem to be fetching a pretty penny from a quick browse online. I’ve seen a few used sets out there that appear to be in nice shape with the...

Hi guys I'm new on here so bear with me . I have just purchased an 04HS8 Range Rover . She runs great but has a few things missing . Like the turn signal covers the plastic bit that goes on the outside on all four of them Does anyone know where I can get these to put on . I've looked...

Hi All. This is my first post here, also I was reading for awhile. I have searched through the forum with no success regarding the little repair I an busy with right now. I am in the process of replacing the plastic part at the back of the coolant manifold (4680290). My old on was leaking...

Hi all, new to the forum. I purchased a roof rail kit for my RR and the kit does not have the plastic alignment parts (item Q in the instruction manual). Anyone out there still have them from fitting the rails to their vehicle? Thanks in advance.

Hi, can anyone tell me please what this part is called, it's a plastic casing that's cracked and leaking gas, especially when the engine is revved, I think it may be the turbo cover, A garage has made a botch attempt to repair, as you can see from the picture. Any help would be appreciated

So this cold has made working outdoors brutal and I think it contributed to finding white plastic chips on the dipstick this morning. For anyone who has had the guides fail is this a good indication of falling pieces. There have been some noises that could be mistaken for very cold idler...

What's the part numbers for the two black plastic overs that clip on over each side where the ignition coils are? 2008 RRS HSE 4.4. Thanks.

Well, first trail damage 8) The plastic "diffuser" under the bumper has a good size rip in it ft. a big rock, is it removable/replaceable? I'd hate to buy a whole new bumper and have it painted. Thanks in advance.

2010 RR Sport SC So I asked my son to attach the vacuum hose to the oil drain tube so we could pump the old oil out and he tried to force a hard plastic piece (that is for the end of the hose that empties into the old oil collection tub) onto the drain tube. The plastic piece broke and a small...

Hi All, Looking for a bit of help with my L322. I am currently working on restoring a 2002 Java Black, it is a HSE with grey leather, foundry grey plastics and a kind of creamish rubberised plastic on the boot trims. I restored the foundry grey plastics and they have turned out well. I now...

Got a pre-owned RRS and the previous owner proceeded to remove the "Range Rover" lettering off the tailgate plastic trim. Looks like he had trouble getting the sticky residue off and looks like the person used a scouring pad to get if off leaving scratches in his wake. Is it possible to use...

my soft touch plastic buttons are becoming sticky to touch. What is the proper way of cleaning it?