Hi, I have a problem connecting code readers to my l332 vogue SE tdv8. I have two code readers that both come up with LINK ERROR on the screen when trying to scan through the OBD2 port. I have checked all fuses and nothing is blown, both these readers work perfectly with my other two cars Bmw...

Hi All, Does anyone know where the wires from the diagnostic port trace to ? i`m trying to see if i have a broken wire and need to buzz the wires out with a DVM pin to pin. i`m guessing they either go straight to the main ECU or to the instrument cluster ? Any help would be greatly appreciated...

hi everyone, can anyone tell me if the jlr sdd tool is good, and if I can reset the sir suspension with it (this is my main concern)

Hello Ladies and Gents, I'm getting code P1332, I clear it and I come back in a day or two. I cannot find it anywhere in this forum.

Hello All.. Im looking for a inexpensive diagnostic tool to read and reset codes on my 2004 Ranger Rover. I see a few on ebay and amazon but not sure which ones will work with the Rover. Any help would be appreciated. Thanks.

I want to purchase a scanner but I want to spend under $75.00. After much Tim researching I have found several decent models on amazin but I am considering one of the low cost wifi or Bluetooth models and then download my choice of software app for my iOS. I would like to know if someone has...

Hello all, I got my battery replaced today and the shop owner hooked a battery charger to my obd2 before disconnecting the battery. Would he have damaged anything by doing this? No lights are on now. Will it haunt me later? Thanks in advance. It's an 06 rrs sc.

Hi everyone! I am a new member and I will eventually get around to introducing myself in the new members section. I'm originally from Southern California but I attend college in Idaho and now I'm temporarily living in the Denver, CO area until school starts up again. I am a new owner of a 2004...

Hello, can anybody tell me if an universal obd2 reader which can read live data will show the transmission temperature? I'm about to change the oil cooler and the filter of the transmission and i think it will be very easy to fill the transmission if the temperature can be read this way. Or...

Hey guys im new to the form have always lurked here for very useful information but its time i make my own post I have a 2002 p38 (bosch engine of course) well a couple of weeks ago i decided to change my spark plugs due to the fact i was only getting 15mpg i used ngk iridium plugs all went...

Well this has been an interesting past few days, my p38 will occasionally die while driving. The RPM's flat line, Gearbox Fault pops on the tach, and error code P-0726 shows on the OBD-2. What I have been able to find out is the code is a generic error, more than likely cause by the RPMs...

I can not see the difference between the ELM 327 Generic OBD2 Wifi connector and for example a IID tool. Is it worth the investment. The ELM 327 can be bought for 20 EUR or less while the IID tools are hundreds of EUR's. I must be missing something here....

Where is the obd2 slot on a 2012 range rover?

Has anyone found an ODB2 port lock that you are happy with? I am looking for a recommendation after seeing the rash of L494 thefts in the EU and UK. It's pretty spooky how easy cars with keyless entry/keyless start can be stolen.

Hello, I don't see these on a search or in the stickys. Is there a list of fault codes for our vehicles on here somewhere? Thanks in advance.

Hi. I scan my P38 96 4.6 with ELM cable and ELM Scanmaster MAF is 0.06 - 0.08 g/s. (extremly small) But when i scan other RR with bosh - it show MAF 6.1 g/s - normal. I install 3 different used lucas MAF on my car and nothing changed. is it error in program or i have troubles with my car? Can...

There are cables that convert OBD2 to USB is there software available for laptop use that can be used on 2000 - 2002 P38's ??

I am thinking of buying a 2000 - 2002 RR 4.6 in the next 6 months or so if I can find what I want. Im looking into what I would need spec to the Range Rover. I can wrench so I dont have a problem repairing stuff. While reading thru lots of great posts here I think a good OBD2 interface is a...