Nanocom "engine torque fault" on 1995 Auto 4.6 Gearbox
I have a number of issues with the old girl, the latest of which is GEARBOX FAULT, possibly related to a missfire but maybe battery/alternator (yeah I've done the electrical sticky). I've changed battery leads as they were causing a bit of...
my P38 Gems 1996 4.0 SE had some major work done which resulted in the damaging and susequent replacement of one ABS sensor (FRH) and some fiddlying of the FLH Sensor (removing, cleaning, lubricating bush and refitting).
After carrying on the repairs, with NO particular logic, a soft ABS fault...
I spent sometime looking for answers in the forums (here and BBS) but I have not been able to pin-point exactly where could be the issue (…IF I got an issue!)
To make things simple I will make a list
- ECUs connection, I can connect with all ECUs but sometimes I get a message saying the...
Suddenly my EAS lights are all blinking with dash message "slow 55KPH".
Every time I connect the Nanocom evo and go to EAS faults, it cuts out.
All other ECU s are read without issues.
Your help appreciated.
I did the search and some old threads seem to suggest that Nanocom was lacking come of the features of Faultmate. One such feature is ability to direct read BECM memory, which faultmate can do using SM035 and nanocom can not do. Since this feature requires BECM disassembly and soldering some...
I got my shiny new Nanocom yesterday and was excited to see what sort of codes were hiding behind my Gearbox Fault. Unfortunately it is returning no codes. All the documentation I can find implies that I should have codes in the transmission controller and that the Nanocom should be able to...
Well I picked up a P38 about a month ago sight unseen and was lied to about vehicle condition. Being my stubborn self I still agreed to purchase it. Long story short I found multiple issues with wiring, the engine fuse box and corrosion all throughout the BECM. I have a Nanocom and I'm unable to...
Hi guys, I'm normally on the P38 side but a fellow member of the Jaguar forum I'm on has a fault with his EAS.
I know this site is mainly for the other side of the pond but is there any one in the Wirral area of North West England that has a diagnostics that could give John hand.
I have a favor to ask. :)
Can you verify that you can edit the CCF successfully to modify the main odometer units (the one in the speedometer) between km and mi?
I need to know this for a 2008 RRS. Any takers?
As some of you might recall, I was having some issues communicating between my Nanocom and the HEVAC system. Well, today, the car battery gave up. I have replaced the battery, and verified the alternator is good, and verified all voltages at various remote points are good. And, the good newds...
My 2000 Range Rover (US model) lost ECU-BECM sync (P1674 at each start attempt) within the first few hours of me owning it, and I'm thousands of miles from a dealer.
I have a Nanocom. However, in the Motronic menu, the Nanocom shows the immobilization code is 2150, while in the Alarm menu, it...
I'm thinking of a project and was wondering if someone can tell me the pinouts of the range rovers obd port?
I've got a nanocom and want to use it for something else, but need to know the pinouts.
Many thanks in advance
Hi, I'm buying a nanocom for my P38 and I was hoping to go halves with a mate who has an L322 (TDV6 2002 as per title) but I can't seem to find a nanocom for that model or an unlock code.
Am I being thick or do BBS just not cover that model?
hello all anybody on here in the Walsall west Midlands area owning a p38 nanocom device i really really need to get my range rover p38 hooked up to one to read faults on engine gearbox and reset all my adaptive values for engine and gearbox but not to happy about spending 500 pound on it and...