Search Results for ‘monitor’

My 'Fuel System' Readiness monitor is showing incomplete. Can anyone tell me what the criteria is for setting it to complete. I am assuming it is a 'continuous' monitor so I would expect that it should show complete unless a code is present for the fuel system. I do have the 'Evaporative Sys'...

Did the first generation of l322 (03-05) come with tire pressure monitors?

If you are having issues with the dual screen system please see this thread in the L494 section. http://www.rangerovers.net/forum/43-range-rover-sport-ii-l494/312129-2018-dual-monitor-issues-2.html

I also follow a RRS thread in the UK and there are buyers who are having problems with the monitors/center console. LR is aware of this issue is what they say. There are a couple go guys who returned their vehicles because he could not get a straight answer on the fix time.

Hi, I've been playing around with IHU, MOST tests and Audio update and managed to get it freezed with no data on display. Then I did reprogramming via SDD for IHU and Audio Control Module, after 50 minutes everything came back to normal and all the functions work but on the "terrain" screen it...

Hi just after some info my l322 TD6 2005 has put up codes gear monitor 1 and 2 what actually causes this fault to appear and i dont mean its knackered what do they actually refer to

Hi, still getting used to my 2012 RRS i bought about a week ago, and one thing that's been bugging me is that the backup camera has this weird fog or cloudy display to it when talking about the right side, see pics below: My first hunch was to clean the backup camera itself, then I got a...

Hi. Is there any sound warning along with the light in a mirror for the Blind Spot Monitor system ? My previous car (Mercedes) used to beep when I turn on turn signal and BSM system detects an object. It looks like RR system does not do this. Am I missing something or that's the way it should...

Hey everyone, Would there be a way to put on OEM blindspot mirror assemblies and power them to have them work? I wasn't sure if the sensors were in the actual mirror assembly, but from my research they are. I then went and drove a similar 2011, and went through the settings to see if there was...

I had a pleasant surprise when I took delivery of my 16 sport, blind spot monitors. Wasn't expecting it as there was no mention of this feature on any of the literature or build sheets I've seen, unless I overlooked it. Good stuff!

Hi, this is my first time posting to the site anyway I have a few questions in which I have had problems with from before hand and I have searched through the site before registering and nothing. So my monitor for my 2003 HSE Range has been turning on and off so it will go to the loading screen...

Hi, I have 2003 Range Rover hse I have codes GEAR MONITOR FAULT what does this mean when ever the truck goes into limp mode any help would be appreciated also I have replace radiator, oil cooler, transmission service, trans thermostats. Still have this message I can say after trans service it...

Hi all, I have a beautiful 2003 RR Vogue TD6 with116000 miles on the clock, which has started to flash up the dreaded TRANS FAILSAFE MODE! It's just had a new compressor for the air suspension, and the driveshaft had not been done when they were recalled, so that has also been done. When I...

Good Morning. New Range Rover owner here. Bought an 06 HSE 4.4 about a month ago 90K miles. Since the day I bought it, it would throw a "check spare tire pressure" light everytime i'd start it. The light would go off after a few mins, and wouldn't light up again until I started the truck again...

Hi guys, I bought nice RR TD6 2006 a month ago with transmission done begining of july (torque converter, master kit, new oil, oil coolant as well) Now 3 day ago after approx. 25 miles I noticed it doesnt wanna change from 4th to 5th and then it put itself into Trans.failsafe prog. I was on...

So my driver's side Blind Spot Monitor will flash and go solid, as if there is a fast approaching vehicle, however there is nothing approaching! This only happens about once or twice a day; and is more of a nuisance than a real issue...but Is anyone else having this issue?

I am having some trouble getting my range rover to pass inspection. They say everything passes and the comptuer not connects, however the "monitors" are not working. What do I do to get them to work? Is there a control unit that I need to replace? Thanks for the help

Hi guys, I have discovered that the OEM passenger headrest monitor in my 2008 SC is cracked under the outer layer. It lights up but is spider webbed out. Does anyone know the manufacturer of these so I can get a replacement or will any 7" monitor fit? I don't care if it doesn't match the other...