RangeRovers.net Forum banner

manifold

  1. Need location of PEH101500 Intake Manifold hose

    Range Rover Mark II / P38
    Hi all, This hose was included in an Atlantic British hose kit but I'm not finding anything like it in the engine bay. So far I've looked through the forums, and Google of course, without finding anything. If anybody knows where to find it in RAVE that would be helpful too. This kit...
  2. exhaust manifold bolts

    Range Rover Mark II / P38
    1998 4.6L Gems One of my exhaust manifold to head bolts sheared, and so I thought I may as well replace the whole set of 8. But everywhere i look they reference a 12 point M8 bolt ERR4961. But mine are 12 point and M10 - there's no sign anyone ever drilled out from 8mm to 10mm, although this...
  3. Little white hose rear intake manifold

    Range Rover Mark III / L322
    What does this little hose do or where does it go?
  4. 2003 L322 rear of intake manifold lines

    Range Rover Mark III / L322
    Have a 2003 Canadian l322. Just did timing chain guides. When I bought it, it was partially disassembled. There’s a nipple off the back of the intake manifold that I have no idea about. Any insight is greatly appreciated.
  5. 2007 HSE RR plastic part at the back of coolant manifold

    Range Rover Mark III / L322
    Hi All. This is my first post here, also I was reading for awhile. I have searched through the forum with no success regarding the little repair I an busy with right now. I am in the process of replacing the plastic part at the back of the coolant manifold (4680290). My old on was leaking...
  6. Y-pipe to manifold nuts

    Range Rover Classic
    Trying to remove my Y-pipe in my 95 classic. Are the nuts different sizes. Two were 1/2 inch, but one is smaller on both sides. Can't seem to get the right size socket on it. Also, is getting the y-pipe off a PITA? Not going very smoothly for me. Any tips? Thanks.
  7. Fuel Injector Removal

    Range Rover Sport / L320
    2006 RRS Supercharged....97000 miles. I want to have the fuel injectors removed and cleaned ultrasonically as I am getting P0307 and P0306 misfires. The spark plugs have been changed and I still get the cords. My Indy shop does the work and they are usually pretty good about the pricing...
  8. coolant leak at tranny oil cooler manifold

    Range Rover Mark III / L322
    An observable leak appeared below the tranny cooler manifold toward the outboard side on our 2004 and wondering aloud if anyone has spotted a leak there which was the rad or one of the orings for the manifold. The rad is now at the 5 year mark and I had replaced the tranny cooler along with a...
  9. Intake Manifold O-ring and Clip

    Range Rover Sport / L320
    Long time reader, first time poster 2006 Range Rover Sport Supercharge with 96000+ miles on the truck. I've been getting P0171 and P0174 codes once in a while and then they would just go away on their own. But few days ago I got bunch of misfires and Reduction of Engine Power messages so I...
  10. Manifold Air Pressure Sensor Location

    Range Rover Mark III / L322
    Anyone know where the Manifold Air Pressure Sensor is located? Im looking to change it due to p0172 and p0175.
  11. RRC 88 inlet manifold

    Range Rover Classic
    Hello, i have a RRC 88 with stromberg CD175 double carbs, there is a hose connection from the radiator to the inlet manifold block, what is that for? and on the inlet manifold block side the hose is closed because of rust, shall i remove the rust to let the water go inside the manifold?
  12. Cracked exhaust manifold

    Range Rover Evoque / L538
    Hi, Has anyone had or heard of evoques having problems with cracked exhaust manifolds? My evoque's manifold cracked with 45000 miles on it. Seems kind of odd for a exhaust manifold to crack and the price they want to fix it is ridiculous. Thanks
  13. 2003 L322 oil inside intake manifold, vacuum question

    Range Rover Mark III / L322
    Hello fellow land rover fans and drivers Concern that i have today is that I've got service engine soon light and here is what I've got from RSW allcomms: - lambda control adaption exceeds lower limit bank 1 - DM-TL small leak (1.0mm). In the OBD2 words: - P0171 system too lean bank 1 - P0440...
  14. RRC Exhaust Manifold Bolts Coming Loose

    Range Rover Classic
    The RAVE manual claims there should be lock tabs on these bolts... I don't have a lock tab (must have been removed by previous owner). Upon some internet scouring, the stock lock tab system is claimed to be worthless. What is the recommended route here? I've heard both loctite and lockwashers...
  15. exhaust leak between exhaust manifold and catalytic convert

    Range Rover Sport / L320
    Hi all, I have a 2006 RRS SC and i recently replaced my catalytic converts . I have a small exhaust leak between the cats and the exhaust manfifold. My LTFT spikes at idle and using a air blower and bubble spray i'm able to see bubbles where the cats join to the exhaust manifold. I had...
  16. Exhaust manifold spacers - applicable to RRC's?

    Range Rover Classic
    This morning whilst perusing FleaBay, I happened upon a listing for exhaust manifold spacers that indicated they were appropriate for 1993 RRC 3.9L and the listing states that they solve the issue with the bolts loosening over time...
  17. Intake manifold gasket part number

    Range Rover Mark II / P38
    Hi all. I'm about to replace my intake manifold or plenum gasket I don't really know what it's called in the correct terms. I can't really figure out what is the correct part. I also think I need some rubber parts that are under the gasket. Can anyone guide me to the correct parts please. The...
  18. Exhaust Manifold bolt

    Range Rover Classic
    I am trying to find a replacement bolt for the two rear bolts on the passenger side of the exhaust manifold. They are odd looking bolts that attached the exhaust manifold to the block, and also separate the heat shield from the manifold and attach the heat shield. I know that I am not...
  19. Hot start problem after intake manifold gasket replacement

    Range Rover Mark II / P38
    Hello, My RR p38 from 1997 has some hot starting issues since the repair shop has replaced the intake manifold gasket. I didn't have any problem before that. After driving the car for a few miles, and leave the car for 20 minutes or so, it does not restart correctly. Very low idle and most of...
  20. Exhaust Manifold to exhaust pipe leak on bmw range

    Range Rover Mark III / L322
    For a while I have heard an unusual sound emanating from front passenger side front wheel well. Tonite I confirmed the seal between exh pipe and manifold is puffing air. Got an engine light the other day so probably is why. My question is to anyone who has done this repair. Will the parts...
Top