Range Rovers Forum banner
loom
1-15 of 17 Results
  1. Range Rover Mark III / L322
    My 2004 RR L322 just died on me in France. Apparently the wiring loom is burned out, so I'm looking for someone (or a garage) to help me get it back and/or rewire it. Know anyone?
  2. Range Rover Mark III / L322
    Hi all My L322 TD6 (2004 BMW diesel engine) sometimes is loosing power and fluctuates in revs when idling. I'm pretty sure it relates to bad wiring/plug to the fuel pressure regulator (big thanks to Chris57 for pointing me in the right direction!) I can't find a repair wiring loom for the TD6...
  3. Range Rover Mark II / P38
    Ok admitting defeat at being able to wire in a later cruise control ecru to my 1998 4.6 petrol. In a previous car all wires matched no probs but this time I,m strumped i have 2 early ecus but not the plug I cut off the loom so has anyone a plug that I can buy and wire back in the cruise
  4. Range Rover Mark III / L322
    Hello, all. The Body Control Unit functions of my 2003 FFRR has been acting up for a while now, and I've been checking ground points and connections where I can, with no luck. The problems have been things like various buses not working, the doors not always automatically locking at xx MPH, odd...
  5. Range Rover Sport / L320
    For a few weeks now I've been getting that long beep showing that the parking sensors were inoperable. I bought some sensors on ebay and put them in without checking the wiring loom. Same issue. This morning I took everything apart and inspected the wiring. My OBD tool told me which sensors were...
  6. Range Rover Mark IV / L405
    I'm looking for the wiring diagram for the headlights (the 16ish wires going into the headlight casing) and which color wire triggers the high beams. I'm looking to had the LED bar I mounted behind the grille turn on when the high beams go on. Will post photos after the install in case...
  7. Range Rover Mark III / L322
    I have just received a LR loom to replace the faulty one in my transmission part number YMD001500. I have been told this is the loom I need but there is no heat sensor on it, I was also told you cannot buy just the sensor. this is the second loom sent to me and it appears to be the wrong one...
  8. Range Rover Sport / L320
    G'day, Just purchased and 05 RRS V8 Supercharged in really great nick with 128K on the clock. Absolutely love the car, it actually makes me smile the same way the old KTM SM 640 does. Picked it up from the dealer and drove it home the first night to discover water in the LHS passenger well...
  9. Range Rover Mark III / L322
    Hi all I have a 2003 l322 td6. Been having occasional misfire and traced to be the plug on the end of the fuel rail. If I wobble it all is good again and runs ok. Now I'm trying to find a replacement loom but can only seem to find one for the freelander td4 Part number YMQ503320 Does any...
  10. Range Rover Mark II / P38
    my car is off the the road,because i am doing a number of jobs on it.i opened the bonnet today and found that the main loom on the nearside that runs around the side of the battery along the inner wing has been eaten by rats and is now in two pieces.i know how to join most of the wires because...
  11. Range Rover Mark III / L322
    hello all, any one know about the towing loom om 2003 l233? ive fitted a vuh000020 britpart loom and i cant get it to work ,im in essex and the local land rover guys have only ever fitted a genuine looms.but land rover have stopped stocking them now and they are out of production ,any pointers...
  12. Range Rover Sport / L320
    Need help from anyone who has or installed DRL kit.. badly made loom ? Installed kit on my 2011 RRS. Regular bumper not autobiography. Lights don't work. Did a lot of troubleshooting and found something odd. The main loom from the kit is split at the front facia with a 4 pin plug to allow...
  13. Range Rover Mark II / P38
    Here's a weird one: How come I've got a 2000 built p38 2.5 dse with no cd player? Archaic or what? Can anyone advise on how to easily upgrade my unit please? The sound quality is very good if a bit quiet. It's nowhere near loud enough for my needs. I believe there are separate amps in the doors...
  14. Range Rover Classic
    morning all, I got a rv8 3.5 efi(flapper) and premier wiring loom.as far as i can tell everything is connected correctly.now the problem i have is that theres a blue/black wire labelled as "starter sloenoid",now my problem is this.if i put this wire on the solenoid spade the engine turns over...
  15. Range Rover Mark III / L322
    Hi, Without stripping my car to have a look, can anyone tell me where the loom runs from the numberplate light power lines through to pins 5 & 12 of the D183 Module-Lighting Switch? I have a problem with the numberplate lights so I intend to rewire them into the rear sidelights and am hoping...
1-15 of 17 Results
Top