lines

Hi, I just got a 1998 P38 Rover 4.6L last December. Unfortunately it’s been nothing but trouble. After only 2 months and 1200 miles of running it blew its head gasket. I finally got it back on the road a week or two ago and after 3 days/ 65 miles of back and forth to work, it stops dead in the...

I was told today by three different vendors that the steel brake lines are no longer available for P38. What size steel line and fittings do I need for P38? Any sources in the US would be appreciated. I know where to get the tools for bending and making flares, but I need the actual raw material...

1997 RR 4.0 se gems. I see prices all over the place for the fuel pump and the sending unit .....anybody bought one recent and had good experience ?...pls inform And the fuel lines... send and return to the filter .....I'm looking for them too ?.....anybody apart from AB sell them ? pls...

Ok the cold temperatures have been doing a number on my air ride. In my heated garage the suspension works normal, will raise lower, maintain height. No leaks. I get going down the road and my suspension will drop. I found that the front strut will be bleeding off air. I shut it off and restart...

Have a 2003 Canadian l322. Just did timing chain guides. When I bought it, it was partially disassembled. There’s a nipple off the back of the intake manifold that I have no idea about. Any insight is greatly appreciated.

I am planning to bring my P38 back from coils to air suspension. I'm debating on installing new air lines with the hope of not always chasing issues with the systems after rebuilding the pump, valve block, installing new bags, air dyer and sensors. They are now 18 years old and I think it...

Good evening, i have two doubts about GEMS oil cooling system, hope somebody knows the answer. 1) which is the real task of oil cooler bypass spring valve fitted in timing cover?Is this valve really so sensible to detect oil density, so when oil is cold (thicker) the valve open bypassing oil...

I finally managed to replace the 2 brake lines that feed the rear wheels. There is a junction block at the rear front well and under the front fender liner so I removed that to ease the disassembly. There are 2 plastic covers that protect the brake lines to the rear and are between the rocker...

hi all ive a 08 Vogue Should i have cornering lights as standard and can they be turned on and off from in car menus reverse camera im sure in my friends 04 RR the reverse camera has parking assist lines. is there a guide line function on my 08. cheers in advance

Hi Everybody, I'm in progress of upgrading the RR 2012 Supercharged brakes, so I bought EBC Rotors + Brake Pads and would like to replace original brake lines with stainless steel lines. Please help to find them online(I can't get anything online, I see STOPTECH for RR Sport) and please...

Good day all- I have a leak in one of my trans cooler lines. I purchased a new set from the dealer ubp500400. I disconnected the lines at both ends and support bracket but I can't seem to find a way to pull out the old set. Has Anybody ever done this type of work and can advise me if this is...

Hello, so a whole 15 km of driving the truck broke, massive puddle underneath of ATF, clear break in the tranny line going from the front of the truck to the transmission. There’s two lines, does anyone know where to source these from? It’s a 1984 German market with the 3.5 and 3 speed auto...

Just wondering if anyone has given any thought to replacing the EAS air lines with steel. The ends could be replaced with screw in adapters and steel lines used. Probably never crack or leak again.

So, I've been struggling to diagnose an ABS issue recently. I finally fixed that issue, only to have a rear brake line blow as I was test driving my '01. The leak is with one of the rear hard lines. The corrosion of these lines (as well as other under body parts) concerned me, but I was...

Hi Folks Just refitted the engine to my classic after an engine rebuild and it has a fuel leak due to the lines corroding. An inspection of the lines showed they're pretty bad so there's no point in repairing the leaking section I may as well do the whole lot. I removed the lines and took them...

This was for my 1992 Range Rover classic. Backstory: I just finished putting in a newer engine, trans, and transfer case and on it's first offroad voyage after the work about 300 meters from the end of the trail the transmission cooling line between the transmission cooler and the...

Does this look right? I was up till 2 a.m. messing around. I unhooked the lines and wanted to make sure they are correct now. Top hose is on left port of cooler. Thanks!

Eventually I will be rebuilding my compressor , value block, replacing my air springs etc etc. I'm thinking while I'm at it I should just run all new airlines. With 121k miles on a 2002 how long to the airlines last? 6mm and 4mm. Is it a major PITA? I figure front ones aren't bad but the tears...

The oil hoses to and from the oil filter assembly connect to the filter adapter plate on the left side of the block. The two hoses are secured to the plate with a single bracket. I have a slight oil leak there, enough to leave oil on the ground. I removed the plate & replace the O-rings...

So, i have been having an issue where the transmission short shifts and hunts for gears. traced it down to most likely being low on fluid as it seems the transmission cooler lines are leaking. After doing a bit of research it also seems there is a TSB out on this. I have ordered both lines...