lift

I have been looking at the heavy duty Britpart coil kit for my 01 and pair that with Terra firma extended travel shocks from rimmerbros seems like best option. Any ideas I know Britpart is good I have the full suspension setup on my D1 very high quality arms and springs paired with super gaz...

Hi all, I'm debating whether or not to lift my Range Rover. This existential crisis started when I noticed cracking on my tire sidewalls. I've been looking for something replace the 225/75R16 Dunlop Radial Rovers that came with the car - I've always found them proportionally awkward anyway...

Hello, I asked someone last year how they were able to manually get the lift gate glass open, when the glass wont open. Unfortunately I got no reply. My lower gate opens fine, but my upper glass wont open. Can someone help with how to get the glass open? I remember something about cutting a...

I have fitted longer suspension feedback arms on each wheel to get extra ground clearance on my 2014 L494 RRS and I am keen to know if I can get my suspension module reprogrammed/calibrated to trick it into access height being normal height, normal height being low off-road, and off road being...

HI all, one of my buddies sent me a photo of a RRS with a real 6" lift (not a suspension mod trick) while he was at SEMA. While I find this pretty awesome, it is beyond my current aspirations (while under warranty). I believe I saw someone on this forum with a setup like this. Looks like there...

I am new to the site and would appreciate any guidance you all can give. I have a 2006 l322 with Johnson rods and 33” nitto ridge grapplers. I use this around town but have primarily built it for off road us. Great truck but I am concerned about the potential loss of compression on the air...

I am posting some of my experiences with doing a body lift of 2" then 4" on my P38 2001 Range Rover. Now there are some kits available for this and some instructions but those I have found just leave too much out. You WILL RUIN something if you just think what the kit build says needs to be...

I have just replaced one of my power tailgate struts on 2012 range rover sport, as it has been creaking loudly lately upon opening and closing and sounded like it may break or snap. Now that I have replaced it and connected it properly, the power lift option does not work (the power button in...

Has anybody replaced the power lift gate struts on an L320 with regular gas struts? My right side has failed (retainer broke, came off the stud and jammed, now has a sizable dent in the tube). I never loved it as a feature, and if I can save a couple hundred bucks by just going with a “normal”...

Hi, My driver's side window lift channel decided to deposit itself in the bottom of my door a couple of weeks ago. The glass is now firmly secured by Her Majesty's finest black gaffer tape, but I can't find a replacement channel anywhere. Has anyone out there reworked a replacement channel from...

Does anyone successfully use a 2 post ramp to work on their RRC? I appreciate the jack points are diffs and axle beams not cills - do 2 post lifts work ok without having jack points on the cill sections? Cheers

Loose change fell into carpet seam located between kick panel and 2014 Range Rover L405 drivers seat. How does the kick panel come off, so that carpet can be lifted to remove coins? Front kick panel pulls up via clip fasteners, but rear seat kick panel also requires removal because it's attached...

Which of these two options is the better and more reliable way to lift my '07 RR HSE 2"? I want to install 295/55/20 tires (not sure which yet) and don't care to pay the extra $$ for the IIDT scan tool if it's worth it? I assume you can adjust the lift 2" and it will stay there if I go with the...

gunna put the 88 RRC up on the 2 post lift today, get a look underneath, see how much work I have ahead of me for doing the bushings, plus checking to see if i can find more issues. where are you guys lifting from?

Has anyone used the Easy Lift by Land Rover Passion? I'm looking in to lift options for my 07' RR and all I've found were Johnson Rods and this. Easy Lift says it has height settings of +70mm, +55mm, +35mm, Neutral, -20mm, and -30mm. Does anyone know the stock lowered and off-road heights are...

So this may be kind of a needy and potentially dumb post. My local shop was told that they should install 275/55r20 BFG KO2s and Johnson Rods. When i got the vehicle back it did not look like the johnson rods were installed. I took some measurements from the center of the wheel to the fender...

Apologies in advance if this is a dumb question. I have access to a standard two-post automotive lift at my friend's garage. Last week when I lifted my L322 by chassis jack points to take off wheels, the suspension well... suspended under its weight and air springs extended to their max both in...

Hi There are a collection of threads around with random info in them, but hoping someone can help with lift options for a 2017 RRS SC. Ive heard of potential tools that reprogram the EAS height (but I don't know if they work with 2017MY) and Johnson Rods. For tires, I've heard of various K02...

Lift your Range Rover 1.5 inches and improve your tire selection with a lift kit from Johnson Rods. Get a larger tire for off road or for a street look. Now is the time to get ready for summer rides. Check our vendor section in this forum under Johnson Rods Check or our website: Range Rover Lift...

Lift your Range Rover Sport L320 model years 2005-2013 2.5 inches with a Johnson Rod lift kit. Get larger tires and improve tire section and off road performance or street look. We also have 18" wheels. Check our vendor section under Johnson Rods...