Range Rovers Forum banner
lever
1-17 of 18 Results
  1. Range Rover Mark III / L322
    Hi. I have the 2009 3.6 TD V8 Vogue 5dr and I want to bring it over to France. I believe there is a tourist lever to adjust the headlights to EU requirements but I don't have the service manual to check this. Can anyone please confirm this for me? I would be very grateful.
  2. Range Rover Mark II / P38
    I set about replacing the blend motors on my '97 P38, while also taking the opportunity to replace a warped dash. Everything was going great until I arrived at the left side distribution flap lever and found the mechanism cracked where the blend motor engages the gear to move the flap. Attempts...
  3. Range Rover Mark II / P38
    So, I'm having a sticking shift interlock solenoid issue, and as a permanent fix, thinking about doing something to the solenoid. Reading the RAVE, it says to remove couple screws and remove the shift lever knob. However, looking at my '02 P38, I don't see more than one screw holding the...
  4. Range Rover Classic
    I had to disconnect the parking brake cable from the hand lever in order to remove the center console. I got the latching mechanism out of sequence and now cannot reconnect the cable. There is a mechanism blocking the hole where the cable connects to the hand lever. I cannot reset the...
  5. Range Rover Mark III / L322
    So I'm working on replacing the main blower motor in a 2006 Range Rover. I have 99% of all the electrical disconnected and removed from the dash, but haven't done the centre console yet. First step of removing the centre console is to put the ignition in position II, and put the gear selector...
  6. Range Rover Mark III / L322
    When pressing my brake pedal I feel and hear a click sound on the gear shift. Does anyone have a idea what this could be?
  7. Range Rover Mark II / P38
    I was under my 4.6 HSE yesterday to try and solve my inability to select P and 1 and discovered that the XYZ switch was installed very badly by Roger the Bodger, the last person who was fiddling there, and I need to consult the collective brain to repair the problems. First, the switch has a...
  8. Range Rover Mark III / L322
    I have a 2008 HSE and we've begun to have issues with the gear select lever getting quite stiff. No outright transmission issues yet, just hard to move the lever. The dealer had previously noted this stiffness and told my wife that a $600 assembly needed to be replaced? I presumed something...
  9. Range Rover Mark II / P38
    Anybody know what size the grub screw is for the gear selector handle? Purchased one that didn't come with the screw and need to find a replacement. Don't think it matters, but it's for a 2001 HSE. Thanks!
  10. Range Rover Mark II / P38
    Hey, First post, I have searched and can't find any results - I have a '99 4.0SE - the one with the seats that are manual other than the height which is electrically operated. This was not attached (someone had mucked it up) and I have reattached the motor and got everything in place to operate...
  11. Range Rover Mark III / L322
    shift lever indicator light is always on. even when is locked. I'm not sure if this was before on or off. Can someone tell me this 2004 4.4 HSE Range Rover. I'm asking because I have a problem that I never solved. A random day, my rover didn't crank, checked everything, fuses, switch...
  12. Range Rover Mark II / P38
    Hello, I'd like to update my console with wood surrounds. Finally I get the pieces that I need for the task but the problem is that muy P38 is LHD and the switch walnut surround came from a RHD wich have the parking lever in other place. What I have to do for changing the lever position? Is an...
  13. Range Rover Mark II / P38
    I am using one 4.6 HSE to keep others on the road. I need to get the front drive shaft off but cannot access the bolts on the upper side of the flange. I have raised the wheels off the ground hoping I could just rotate them and the shaft would turn as well but I forgot about the lever being in...
  14. Range Rover Sport / L320
    Shift lever over into M/S mode - supposed to illuminate the letters? As the title says, all the drive letters on the shift area illuminate obviously - green and orange for selected. My M/S isn't illuminated at all, even when in that mode. My friend said they illuminate on his only when you...
  15. Range Rover Mark II / P38
    Hi, I have a strange issue on a diesel automatic. The gearbox lever doesn't lock ie you can go from P to 1 without unlocking with the lever... I know that some grind the gearbox mecanism to go from D to 1 in one move (same as D to 3 factory setting) so i looked for that kind of custom mod...
  16. Range Rover Mark II / P38
    Hi all, I own a 2000 4.6 with A/T and having an issue about the gearshift lever. When I first run the car, it is very easy to move the lever from P to D, but after using it for a while (20 miles for example), it gets harder to move the lever from D to P or R. I do not know how to describe the...
  17. Range Rover Mark III / L322
    Hi Recently been dealing with a few gremlins, the dash shows the transmission fail safe program from time to time, my understanding is that this is caused by the gear change motor playing up. Having played around with it and stripping out the central consol it would seam that it may be the...
1-17 of 18 Results
Top