In the L322 forum I have been reading that some folks have added Johnson Rods to their cars to give an instant two inch lift. These rods just replace the connecting link between the frame mounted height sensor and the suspension mounting point . Seems that something similar could be fabricated...

I am new to the site and would appreciate any guidance you all can give. I have a 2006 l322 with Johnson rods and 33” nitto ridge grapplers. I use this around town but have primarily built it for off road us. Great truck but I am concerned about the potential loss of compression on the air...

Range Rover 2003 http://johnsonrods.com/johnson_rods_3_003.htm They say they are for 2005-2012 L322 Range Rover. Is this a typo- or actually won't fit 2003/2004? Anyone with first-hand experience?

Hi All, New to the board but have been reading for quite some time. Looking at a 07 RR SC today for possible purchase. I have read/searched ALOT of info on here about various tire sizes, and sizes with the Johnson rods lift. From what I've re searched, it appears that any tire that is less...

Check out our new Johnson Rod 2 inch lift kit for the Velar.

Hi Everyone, Please take a moment and welcome Johnson Rods LLC to the community. Thank you,

I was wondering what the disadvantages are of keeping your Johnson rods on full time and also what is the max speed you can go with them. I am wanting to put on 275/55r20 Nitto Terra Grapplers along with this which shouldn't rub unless I find out otherwise. With this I was also wondering if you...

I had a set of rods on my '07 SC for several months when it developed a clunk in the front end over smaller washboard type bumps...not big ones...mostly gravel road type small ones. I replaced nearly every component in the front suspension (both struts/bags...one had failed, control arms all...

Hey Guys, New here and have searched as much as I can on the subject. Have an 07 Full size and just installed the Johnson Rods, but now receiving suspension faults. Curious if anyone else has had this issue as I cannot find any info. Will go back to stock rods for the moment but would like...

New 2013 Range Rover owner in Tennessee

My Range Rover with a 2" Lift and 33" All Terrain Tires Johnson Rods 305/55/20 I saw a picture a few months back of a fullsize Range Rover lifted two inches with 33" all terrain tires so I decided to do something similar to my own. Originally I had 24" Asantis on the truck which didn't look...

I've got an 'll SC RRS and just put the 20 inch Rover rims and 285/50/20 tires on it for the pending winter. Wondering if anyone has put johnson rods on their truck to trick it into driving at the elevated height? and if so does anyone know if that will mess up the computer on the truck? does...

So i install the johnson rods following tripleEs post, and goes very smooth last night. Used the plastic divot tool ( was helpfull, and have some left as i couldnt just buy one, anyone in SD needs a couple let me know). RRS has 20 with coopers, the lift helped with the rubbing a bit, still...

Has anyone installed a set of the rods on the FFRR? Any pictures?