Range Rovers Forum banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-18 of 69 Results
  1. Range Rover Sport / L320
    Hi folks, I'm in the middle of the timing job on my 2012 RRS SC. As part of that job on an SC car, you have to remove the supercharger. Well, after removing the supercharger I noticed that my intake valves were VERY badly coked with carbon (pics further below). So I started a thread here on the...
  2. Range Rover Velar / L560
    I currently have the heads off of a 2010 Range Rover Sport HSE and down at the local machine shop. They need intake valve guides to complete the job, and between the two of us, we have had no luck find them! The local Land Rover dealer can't get them either, and gave me a part number (LJG000030)...
  3. Range Rover Mark II / P38
    Gents, The intake pipe of the V8 GEMS has two "boxes" on it, I assume these are there to equalize pulses in the intake, please correct me if I'm wrong.. If I take these boxes of, does it increase throttle response? I thought I better ask before I do something I might regret later on ;)...
  4. Range Rover Mark II / P38
    Hi all, This hose was included in an Atlantic British hose kit but I'm not finding anything like it in the engine bay. So far I've looked through the forums, and Google of course, without finding anything. If anybody knows where to find it in RAVE that would be helpful too. This kit...
  5. Range Rover Sport II / L494
    See pics below. Mine are corroded and deteriorated and there is no part number I can see on them. Can anyone help please Sent from my SM-G965U using Tapatalk
  6. Range Rover Sport II / L494
    I'm looking for the part number for the 2 rubber seals that go around what looks like air intakes on both right and left side of the engine bay. Mine are badly deteriorated. They attach to the underside of the hood then provide a seal. This is them below. Sent from my SM-G965U using Tapatalk
  7. Range Rover Mark III / L322
    So I’m doing a head job on my 2007 L322 non superched and I can seem to find the torque specs and tightening order for the cylinder heads and intake can any one help with this information? I would greatly appreciate it.
  8. Range Rover Mark III / L322
    What does this little hose do or where does it go?
  9. Range Rover Mark III / L322
    Have a 2003 Canadian l322. Just did timing chain guides. When I bought it, it was partially disassembled. There’s a nipple off the back of the intake manifold that I have no idea about. Any insight is greatly appreciated.
  10. Range Rover Sport II / L494
    Hey all, I've got a 2015 RRS V6, and apparently the Intake Outlet Pipe has failed causing coolant to start leaking out of the engine. Since it's a plastic part, it's not covered by my CPO warranty and I'm wondering if I could save myself $1800 by doing the replacement myself. Apparently the...
  11. Range Rover Mark IV / L405
    Hello all, I have just done up rebuild of 4.4 tdv8 enigine, sounds marvellous and no fault codes, after few drives would say about 160 miles, few days ago I noticed when I switched engine off some sort of sounds come the right intake air box... like releasing pressure... Is that something one...
  12. Range Rover Sport / L320
    2006 RRS Supercharged....97000 miles. I want to have the fuel injectors removed and cleaned ultrasonically as I am getting P0307 and P0306 misfires. The spark plugs have been changed and I still get the cords. My Indy shop does the work and they are usually pretty good about the pricing...
  13. Range Rover Sport / L320
    Long time reader, first time poster 2006 Range Rover Sport Supercharge with 96000+ miles on the truck. I've been getting P0171 and P0174 codes once in a while and then they would just go away on their own. But few days ago I got bunch of misfires and Reduction of Engine Power messages so I...
  14. Range Rover Sport / L320
    I been trying to find a air intake for my 08 RRS HSE but I can’t find any. The only one I find is for a 06. Does anyone know if they have similar specs maybe they are compatible. Or any other ideas?
  15. Range Rover Sport / L320
    Yes.. you are wright is coolant..take a look at the picture and the previous vide...any idea..
  16. Range Rover Sport II / L494
    Opened up my stock filters and they were filled with wood chips. Thought I'd try the K&N. They arrived last Friday and I installed them over the weekend. The quality of the filter actually seemed quite high, visually at least. The thing that surprised me though is the SVR exhaust got...
  17. Range Rover Mark III / L322
    My wife has my laptop with her at the office today. I don't have my manual because of it and need to know the order and torque for my intake manifold. 2006 RR HSE Thank you!
  18. Range Rover Mark III / L322
    Hi guys, Quick question: I am looking at a rough-ish 2006 SC with 220k on. I know the service history, but the shop is telling me that there is an intake valve issue on the early 2006 SC which causes a slight tap on cold start up (similar to a non-oil filled hydraulic tappet sound, I am led to...
1-18 of 69 Results