RangeRovers.net Forum banner


  1. Bump stop? Help identifying piece and importance

    Range Rover Mark III / L322
    So the other day something started making a strange grinding sound on the passenger rear of the car. Brakes seemed fine so I was thinking wheel hub or something. Jacked up the right side of the car and the piece in the picture fell and landed on the bottom of the rim. I'm assuming it was...
  2. Help with identifying loud grinding noise 94 RRC

    Range Rover Classic
    Help! My 94 SWB RRC started making a loud groaning/grinding noise that's scaring small animals and children in my neighbourhood. I've had this truck for 6 months and, until now, the noise has been infrequent (maybe once a month) and goes away quickly. It wasn't that loud either so it wasn't...
  3. New Member - Help Identifying Wires 13 RRS/SC

    Range Rover Sport / L320
    Hi all! I have a new to me 2013 Range Rover Sport Supercharged that I am in the process of getting settled into. Thus far its a great suv, with loads of power. I was looking through the engine compartment and noticed a wire on the passenger side, next to the air filter, that the previous...
  4. Help Identifying Part

    Range Rover Sport / L320
    I’m looking for some help here. I found this panel in the back of my 2010 Range Rover Sport and trying to identify where it goes. Any help would be appreciated!
  5. ‘97 2.5 - oil leak frustration- identifying source

    Range Rover Mark II / P38
    Hi guys, Writing this post from a place of utter frustration. Since early October I’ve been on a quest to rid my DSE of all oil leaks. Which has include renewing: Rocker cover gasket Engine oil sump gasket Oil cooler pipes Auto gearbox oil cooler & pipes Gearbox sump gasket (new filter too...
  6. 1997 2.5 DSE Auto - LHD, identifying engine bay pipe

    Range Rover Mark II / P38
    Hi all, I’m looking to identify a pipe within the engine bay. Per the title it’s a ‘97 LHD diesel. To describe it, the pipe is black and exits the bulkhead right behind the the rocker cover. It then goes down and disappears behind what would be the cylinder head but I cannot see where to. I...
  7. Help needed identifying nav computer 2004 L322

    Range Rover Mark III / L322
    Hi I'm looking at upgrading(?) from my P38 to a L322 2004 version (well that's when) the VIN says it was built, The model is a Japanese version imported into New Zealand some time ago so don't know if a previous owner has fettled with it. However after reading all the stuff about the navi...
  8. Need help identifying missing part

    Range Rover Mark III / L322
    I recently purchased a project 2005 HSE. I have looked through as many parts diagrams as I can find, but haven't had any luck identifying the missing part. Sorry in advance for the lousy pic. Anyway, the picture I have attached is looking at the drivers side of the engine. The main line that...
  9. Broken part. Need help identifying. Oil filter holder in cap

    Range Rover Sport / L320
    Vehicle: 2010 RRS SC 5.0 So I was changing my oil today and while taking out the old oil filter this piece snapped off with the oil filter still attached. I have tried searching for the part but still could not find it. It's the part that is held at the top of the cap in which the oil filter is...
  10. Help in identifying engine part

    Range Rover Sport / L320
    I've been searching for 2010-2013 range rover sport supercharged engine diagrams but nothing came up that tells me what this part is or does. Anyone? Thanks in advance.
  11. Help identifying coolant leak w/pics

    Range Rover Sport / L320
    2006 RRS HSE 4.4 w/ 227K miles First off let me apologize if I come off as rude or frustrated, it's because of the latter. These past couple months have been a rollercoaster with my RRS. I can't expect much, especially with 227k miles on the odometer, but we are really trying hard to keep her...
  12. Help identifying whining noise

    Range Rover Sport / L320
    The truck doesn't make this noise 100% of the time, however it is fairly frequent. I've asked the dealership to investigate it twice now and they always say "could not replicate". Video was taken from the passenger side front wheel well...
  13. Need help identifying rubber tube in battery tray area 2011

    Range Rover Mark III / L322
    Removed a battery from a 2011 RR F/S HSE and a short rubber tube came off from somewhere. Was hoping someone could help me identify it and where it goes so I can put it back in and install the new battery. Any help is greatly appreciated.
  14. Help Identifying These Wheels

    Range Rover Mark III / L322
    Does anyone know what the OEM part number is for the wheel on this RR or where I can find technical specs on it and where to purchase them? I believe they came on the 2010 Auotobiography. Not 100% sure about that but I believe so. Thanks in advance.
  15. HELP identifying correct Throttle Body O-ring part # on 2004

    Range Rover Mark III / L322
    2004 petrol USA vehicle. On the throttle body pictured below, my flat gasket has gone to hell as shown where I drew the BLUE circle; it's flat, and has a groove to mate into the Throttle body, and it seals off to the plastic air tube going over to the MAF. Can anyone help me identify the...
  16. Help with identifying disconnected multiplug

    Range Rover Mark III / L322
    Noticed this disconnected multiplug behind the engine which doesn't seem to go anywhere - is this normal?
  17. VIN Problems in NZ .... Identifying Manufacturer

    General Chatter
    I have a 1995 P38a Range Rover SALLPAMJ3TA318996 SALManufacturer code: Land Rover LPModel: Range Rover, second generation (38A model) AWheel base: 108 inch MBody type: 4-door station wagon (LWB) JEngine type: 4.6 litre injected petrol 3Steering and transmission: Right-hand drive...
  18. identifying hose/proper routing?

    Range Rover Mark II / P38
    Greetings all. I spent my Saturday inspecting the vacuum lines on a new to me 2001 P38 in am effort to track down a slightly rough idle. ( the OBD reader has been ordered) I found a strange hose, possibly part of the fuel evac system which I cannot identify through RAVE or the search function...
  19. Extra amp wires found. Help identifying please

    Range Rover Mark III / L322
    While removing my blown subwoofers I found a set of wires with a connector on it. I know it was wasn't connected to anything just trying to identify what it would be connected to. I'm guessing some extra nav or Bluetooth? Here are the colors of each one: Brown Purple/white Yellow/white...
  20. 1997 4.0SE help identifying hose please?

    Range Rover Mark II / P38
    When changing the spark plugs today, I took look around the engine bay and came across a hose that doesn't seem quite right. The hose is held in place with hose clips, although one end appears to be blanked off with a bolt? Can anyone identify what this hose is/was for? And is it right to be...