Range Rovers Forum banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-20 of 73 Results
  1. Range Rover Mark II / P38
    Any chance of restoring the photos to Post #1 on the following thread ? :- p38/12419 - How to remove the driver's door handle without breaking it. Alternatively does anyone have a copy of the thread with photos please ? Thanks
  2. Range Rover Velar / L560
    Yesterday found myself having 40 pound bags of wood pellets loaded into my 2018 Velar - the night before I researched the on-line owner's manual about weight capacity for cargo - to no avail. So I called the Land Rover dealer, and after talking to both sales and service, along with them...
  3. Range Rover Mark II / P38
    Hey guys!! Looking for some pro pointers! I’ve read a few of the headliner reupholstering threads and haven’t noticed anyone experiencing my issue so I thought I’d post a new thread. Hopefully I’m not offending protocol. Ive managed to reupholster my headliner and wrapped all the pillar trims...
  4. Range Rover Classic
    Hello, I would need a tailgate handle for 1983 Range Rover Classic. The original part 390838 is obsolete and I'm wondering if the newer part MWC8656 will fit to earlier RRC model. Does anybody know what is the difference (if any) between older and newer handle? Thank you.
  5. Range Rover Sport II / L494
    I picked up my car from the dealership today. When i got home i realized the right side of the handle was lose. After looking, I realized there was a part missing at the bottom. What is the name of this part called? I'm new to the forum and for some reason it wont let me upload a picture of it...
  6. Range Rover Mark III / L322
    Just bought a 2006 RR HSE, the door handles are looking a bit sad and I noticed these on ebay, in black and chrome, anyone tried out, Thoughts...
  7. Range Rover Classic
    I'm under the impression that the 3.5 oil pump is barely adequate. I'm preparing for some desert camping and i'm looking into fitting an oil cooler. I know later classics came equipped from factory with a cooler, but I am concerned about pressure. What do you think?
  8. Range Rover Classic
    Hey all, The other morning I (hastily) forced the key to turn in the door-handle tumbler. Instead of unlocking the vehicle I snapped something. (Not sure what snapped, but now the key continuously turns in the tumbler w/o locking or unlocking) The snap happened because the lock button got...
  9. Range Rover Classic
    I can't find new/used inner door handle trim for my 1988 ANYWHERE! Does anyone here have any, or should I get some 3D printed? I'm missing the two front trims, and the right rear is cracked. Lastly, at a last resort, would the D1/newer Range Rover inner handles fit with some panel modification?
  10. Range Rover Mark II / P38
    Hi, My drivers door handle has broken so need to swap the lock over to a new handle. Has anyone got a guide to how to do this with tips etc or special tools required? Tried search but I cant find what I am looking for Thanks Barry
  11. Range Rover Mark III / L322
    I was taking the driver door panel off to replace the peeling window control switch trim. There was one last clip in the middle of the panel that just wouldn't come off. It finally came undone, but I pulled a little too hard and the hooks on the inner door handle taht grab onto the cable to open...
  12. Range Rover Classic
    Hi, I can't recline my drivers seat, which wouldn't be a problem, but it is already too reclined and I'd like to raise it!! The adjuster / handle just spins and nothing happens, so I'm assuming that the center of the handle has stripped out, and as the part is OBSOLETE :crybaby2: I'm at a bit...
  13. Range Rover Mark II / P38
    Is the key cylinder interchangeable on door handles? I would prefer not having to toss my keys and remote just because I am replacing door handle.
  14. Range Rover Classic
    I'm in the midst of replacing the rusty mess that is the glass tailgate frame on my 92 Classic with the Masai kit. I also purchased a new handle since mine was missing. So far so good but... I can't figure out how the pin in the middle of the handle interacts with the center of the rod...
  15. Range Rover Mark II / P38
    Does anyone know if a grab handle was fitted to the A piller on the passenger side of any model of range rover, if so could one be fitted to the p38 vogue.
  16. Range Rover Mark III / L322
    Do you hate your nasty faded door handles? I got sick of my super nice paint and body clashing with my ugly door handles. Easy to do in a few hours. 80% of the job is prep. You don't want overspray. Also take your time. It took me five hours, but could have gone quicker. The biggest challenge...
  17. Range Rover Mark III / L322
    Well this is a lovely safety hazard! Lets hope i don't roll it on its side and can't get out! How do I get the door open to work on it? The vehicle starts and operates normal; I assume this means i'm not superlocked, therefor why can't I pop the door open by leaning over and pulling the...
  18. Range Rover Classic
    1995 lwb. the silver paddle part of my drivers side door handle is cracked and splitting; not long before It breaks. Is the paddle only replaceable? anyone done this before? comments ate certainly welcome; PM messages too! To be clear, outside handle. thanks geneo
  19. Range Rover Mark III / L322
    My driver's side door lock and door handle do not function properly when the truck has been sitting in the sun for some time. If the door is locked when the car has been sitting in the sun, two things happen: -- The lock does not respond the lock/unlock button. -- The inside and outside door...
  20. Range Rover Mark IV / L405
    Hi All, I have just purchased a 2016 Vogue and started to fit the black pack (as I love the look) can anyone help me with the outside handles. They are black currently with chrome and I want them to be all black. I can't find anywhere online that explains if or how they come off? Can anyone...
1-20 of 73 Results