RangeRovers.net Forum banner

guards

  1. Brush Guards for 2015 SC

    Range Rover Mark IV / L405
    Hi. I have lurked for quite a while, but only recently registered, and this is my first post. I have had Range Rover since 1989. My most recent one was a 2004. I am about to buy a 2015 SC. As far as I know LR stopped making brush guards for the RR about 10 years ago. And it is pretty clear...
  2. Front Splash Guards for 2012 L322

    Range Rover Mark III / L322
    Greetings all. I recently purchased my first RR - 2012 HSE LUX with 76000 miles. Runs great and so far so good. When it was delivered, I noticed that it was missing the front splash guards that was integrated with the factory running boards. Anyone know where I can get them for less than $312...
  3. Any good aftermarket Mud Flaps/Splash Guards?

    Range Rover Sport II / L494
    or an OEM dealer online with good prices? thanks!
  4. Anyone Install front and rear splash guards on a 2017?

    Range Rover Sport II / L494
    I just got the two Range Rover brand sets from an online vendor and the instructions are horrible. I also didn't realize that I'd have to drill into the plastic. It shows that to install the fronts, I have to remove the lower plastic piece and it says to remove the bolt underneath and pry it...
  5. Rigid Splash/ Mud guards

    Range Rover Mark III / L322
    Looking for rigid splash/ mud guards for my 2011. Preferably made in USA ??. Do any of you have or know of any that will fit? Husky and weathertech do not have them. Thank you in advance!
  6. Door Edge Guards

    Range Rover Sport II / L494
    Looking for good door protectors to prevent my truck from dinging the vehicle next to me?
  7. Rock Slider and Brush Guard

    Range Rover Mark III / L322
    I'm planning some offroad trips in the next few months and want to beef up some of my exterior for added protection. Most off road treks will be in rocky terrain. I am not having much luck finding tubular rock sliders or tubular bull bars/ brush guards for my model which is a 2011 HSE (full...
  8. eBay mud guards

    Range Rover Sport II / L494
    Anyone use any of the China mud gaurds on eBay? Around $70 compared to the $250 OEMs but don't wanna pay $70 for crap either.
  9. Any P38s with Hitch Guards? pics?

    Range Rover Mark II / P38
    Spend some time in the city, and getting sick of damage from parking ... people are idiots. Was thinking about the Bully model, not sure if I need to go wider as most times I get hit in the corners as people are too lazy to clear our bumpers ebay has them..
  10. Range Rover mud guards

    Range Rover Mark III / L322
    Hi my 2007 vogue se has a overfinch kit fitted Does anyone know were I could purchase mud guards to fit the car as the standard ones won't Thanks
  11. Lamp Guards / Tail Light Guards

    Range Rover Mark III / L322
    Hey all, I was taking a look at these lamp guards (VUB502610): http://www.ebay.com/itm/like/151056717973?ul_noapp=true&chn=ps&lpid=82 And also these tail light guards (VUB001080)...
  12. Mud Guards on RRS

    Range Rover Sport II / L494
    Would appreciate any comments related to the appearance and function of mud guards on a RRS.
  13. Headlight and Taillight Guards

    Range Rover Sport / L320
    I recently purchased a 2008 RRS. It is completely stock right now, but I would like to do some modifications to it. I really like the G4 challenge vehicles, so I thought I would start with the headlight and taillight guards that those have. Does anyone know of a good place in the US to get...
  14. How do you fit light guards ?

    Range Rover Mark II / P38
    When I bought the RR the seller left some light guards in the back, one of the rear ones is broken but the front ones are ok. I have all the fittings and thought that I would re fit the front guards. The front wings are drilled with some kind of sleeves. But how do I attach them to the grille...
  15. Best roof rack, front brush guards for 2006 HSE?

    Range Rover Mark III / L322
    Hello, Anyone have some great online sources to purchase a roof rack (basket or cage style) and front brush guards for a 2006 RR HSE?`) panetrain
  16. Finally Rock / Tree sliders and some nice diff guards installed

    Range Rover Mark II / P38
    Finally Rock / Tree sliders and some nice diff guards installed Hi guys. Just to let you know, there are finally some decent designet Diffguards out there for the RRp38. Rock /treesliders is my own design tough. Terrafirma is making these realy nice diffguards:razz: Part nr: TF899. The...
  17. Refinish Light Guards. Plastic Peeling?

    Range Rover Classic
    Has anyone had any success refinishing the rear light guards? The plastic coating is starting to lift and chip. How would you remove this? Sand blasting? Torch & flame? Any ideas or success's from anyone?
  18. Installation Question: OEM Headlight Guards onto OEM Brushbar

    Range Rover Mark II / P38
    Installation Question: OEM Headlight Guards onto OEM Brushbar Greetings, I want to fit the headlight guards onto the brush guard but I have not come across directions for this. So far I popped off the black screw covers (photo 1). What are the next steps?
  19. Fog light guards?

    Range Rover Mark II / P38
    Has anyone ever seen fog light guards or made any for the P38? I see them broken on a lot of P38's out there. I'm thinking of making some for mine. Not that the fog lights are horribly expensive, but why break them if you don't have to?
  20. Lesson learnt! Fiberglass and Rear Guards

    Range Rover Mark II / P38
    Hi all, just wanted to post a couple photos of sanded and painted rear guards. Probably some of you already know that they are made of a fiberglass compound. I didn't know... until when sanding them my hands and forearms started to itch! So, I suggest that if you are to take on this easy...
Top