Range Rovers Forum banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-17 of 37 Results
  1. Range Rover Mark II / P38
    My gaskets are shot and I have new ones in the box with new bolts from A-B. I watched a video on replacing these and I'm not up for trying this myself. Any idea on how long this job would normally take a shop to do? I have secondary air....:x
  2. Range Rover Mark II / P38
    Just received a Quote from the closest Land Rover Indie for $3400 for the head gasket job + extra $200-500 for incidentals,like plugs,wires,excetra. Last time I had this done it was $1800 and included wires,plugs and an oem water pump. Just would like to confirm this is the going rate these days.
  3. Range Rover Mark III / L322
    I have been having trouble with the valve cover gaskets leaking / seeping oil mainly on the driver side valve cover even after replacing them with new gaskets and valve cover nut grommets. I originally used victor reinz gaskets and grommets and after I noticed that the driver side was leaking I...
  4. Range Rover Mark II / P38
    any RR owner that live in Sacramento and is handy and can help me with mine? Overheating and shops say blown head gasket
  5. Range Rover Classic
    alright, so some complete idiot driving my "new " 88 RRC put a tree limb through the rear 1/4 panel window - I don't know how I - uh I mean he did it, but its done. luckily found a replacement, but now - what about the gasket or weather stripping that goes around the window - anyone...
  6. Range Rover Mark II / P38
    Hello All, Tried Atlantic British, Rovers North, & local dealership. Could not find the gaskets/seals for newly acquired OEM roof rack from a breaker yard (please see photo--these were under middle brackets, both sides; others crumbled as they were taken off). Any leads besides make them...
  7. Range Rover Mark II / P38
    Hi guys, About 20,000km ago I purchased a 96 4.6 on a bit of a whim. In that time I've grown very fond of the old bus and its now time to give him a little love. It has always had what I presumed to be a lifter noise. A few weeks back it developed a rough idle, which I traced to the left bank...
  8. Range Rover Mark III / L322
    I just replaced my camshaft cover gaskets for the 2nd time (1st time at 80k miles, this time at 170k miles), this time with Fel Pro gaskets from Rock Auto. The Fel Pros certainly seemed to fit better, with no problem with the tab at the rear o the heads. Also no sign of a leak afterwards. I also...
  9. Range Rover Mark III / L322
    So, I was going to part out my 2004 RR Westminster but decided to change out my head gaskets folks, what kind of obstacles should I expect to run into? What's a good gasket "kit" or "set" from those of you that have completed this task? My mechanic stated it's only the head gaskets, so that's...
  10. Range Rover Mark II / P38
    Hi. What would a reasonable cost be for this job ASSUMING no new liners needed on my 2000 P38 4.6? :shock: Hope to hear from UK "forumites.
  11. Range Rover Mark II / P38
    I have not yet had one of those days restoring My 2002 RR so I was due. I Installed new valve cover gaskets yesterday , put back on the air intake and a few other parts and called it a day. Had an epiphany last night thinking about the small metal inserts , located in the gaskets that the...
  12. Range Rover Mark III / L322
    Does anyone know the bmw part number for the upper timing cover gaskets. I have 2005. I don't want to order the wrong parts first go round. Thanks in advance.
  13. Range Rover Mark II / P38
    2001 Thor 4.6 - 160,000 not starting. Car overheated so heads and gaskets skimmed/replaced, wouldn't start. So checked wiring & connections and fuses etc then used black box sync mate but still no start. New battery and crankshaft sensor after reading topics on here - still no start. Power at...
  14. Range Rover Mark III / L322
    Unfortunately I did not take the advice of the experts on here and did the valve cover gaskets without doing the upper timing gaskets. Now that I have moved to a cold climate they are leaking... badly... I have replaced all the PCV system and hoses, valley pan gasket and valve cover gaskets 9...
  15. Range Rover Classic
    I've pretty much come to the conclusion that I need to do some work on this engine, but not sure where to get started. Is there a way to tell between bad head gaskets or slipped liners without tearing it apart first? I don't have a lot of time generally to get it the work finished and knowing if...
  16. Range Rover Sport / L320
    Have had engine light and coolant light on and checked and topped off several times. Now they say need head gaskets after injector replacements and rough misfiring. Anyone else had this issue? Not a ton of miles on it.
  17. Range Rover Mark II / P38
    Hi all what a great forum! I have a p38 4.6 hse 1998. 99,000 miles. I bought it several months ago as a project. The head gaskets have been changed a few months ago before i bought it. (The guy is a friend and the gaskets were replaced) but im getting a misfire and a 2 soaked oily plugs...
1-17 of 37 Results