Does anyone know how difficult it is to install front and rear parking sensors for 2019 R/R sport HSE? (unfortunately this was not an option fitted on our second hand R/R sport).
Is the wiring harness already installed to each front and rear bumpers or do you need to buy an...
Hi all, I'm in the market for a 2012 Autobiography, and wonder if anyone has mounted a lightbar to the front of one of them. I want to keep the original front bumper, and only mount a lightbar and hidden winch. I'm particularly interested in the overall width of the bar used.
Join: 11 minutes ago
half a minute ago · #1
06’ l322 owner
Hello RR community. Thanks for the add. I am the owner of an 06’ l322 full size with 2” Johnson rods I installed. I see everyone has installed larger tires as I plan on doing with varying dimensions, however.... I see...
My 2006 RRSC has a leaking front passenger strut. I'm going to get it replaced but I was wondering if most replace both front struts at the same time when only one is leaking. I'm just trying to think of preventative maintenance since it's a wear item and the truck has about 100k miles on the...
Last year, I drove my Rover across the country from Portland, Oregon to Montreal, Quebec (where cars older than 1995 do not exist due to the harsh winters, and the excessive salting). Every once and a while, I had to replace the windshield wiper fuse, but they continued to function. In Utah...
I got a suspension fault code today while driving my 2010 rrs. Pulled the code and it’s c1130 air spring air supply. I suspect it’s the front valve block that causing the problem. Here’s why, raised the vehicle to off road height and checked for air leaks on the both front and rear suspension...
I recently went through an ordeal with ball joints on both of my rovers and have tested several manufacturers' offerings so I made a video describing my experiences with them.
Just wanted to share and hope it helps you all out. BTW, by the end of the video I got the terminology for...
The factory roof racks are fairly useless--you can't put a full platform rack on them without a bunch of shims and some drilling. SD are out there, but $1500 or so seems to be the going price. Voyager to. But Rhino, Front Runner, etc....none of them have shown any love for the P38 so I...
Title says it all. I have been having problems with this driver's side wheel overheating. It is definitely the brake rotor that heats up. New calipers on both sides brought no relief. Does that mean master cylinder? Does anyone rebuild these? Other ideas of what's wrong? It started when I...
I have a 2004 range rover. I took the driver door panel off and now the power lock dont work for that door. Im thinking something went bad. Yesterday i took the passenger side off and it stop working also. Is it a trick to putting the door panels back on? I didnt unhook anything.
The small o rings that install in the shock towards the top. Does anyone know the size or place to source these? Also, where do they go? there is no direction I have found anywhere on how to fit these. (for clarification, these are NOT the collet o rings) I have searched high and low and only...
My car's front window glass struggles to come up & seems some tightness. When this happens the glass goes down automatically with a beep. When it manages to close there is a slant at the edge.
You advise sought to get it corrected.
thanks in advance
Does any of you know how to remove the front seat plastic back cover? Or, those of you with access to Topix, would you mind taking a look? The only thing I was able to find was a YouTube video of a 2006 FSRR, which didn't help much.
Thanks in advance for your help!
On a L322 what is the permissible wheel size difference between front and rear axle?
Currently have 255/50/R20 all round but must replace front two only.
Will 265/50R20 be okay? Diameter is 30.43 inches (77.3 cm) as opposed to 30.4 inches ( 76.3 cm)
Wheel circumference is 242.94 cm as...
Been hearing a terrible metal on metal noise up front for a week now...
Had it inspected, and it's the front diff/power take-off unit.
Here in Canada, a remanufactured part is $3000 with tax..
I'm stuck having to drive it for a few more days also! I hope it doesn't lock up!
So I was deep cleaning the p38 and while I was messing about in the passenger kick panel I found these mystery wires. 3 are cut and taped up and one more goes down to a small splitter there's a line coming from the splitter that is also cut and taped up.
Any ideas? Perhaps an...
Greetings all on this auspicious weekend.
I would like to reverse the aging process of my driver and passenger seat bottoms, they have the usual wear on the outside from climbing in and out. So if I flip them, the outside of the passenger would become the inside of the driver, and so forth...