RangeRovers.net Forum banner

fitting

  1. Traction Control issue after fitting suspension dust boots

    Range Rover Mark II / P38
    Hi All, My P38 failed the MOT on split dust boots on both front lower suspension ball joints and leaking rear oil seal. I have had to remove the front brake calipers, discs and hubs complete with drive shafts to be able to change the lower ball joint dust boot. I did have to use a clamp to...
  2. '06 RRS SC; fitting 33s on Comp's, ARB bumper, etc

    Range Rover Sport / L320
    Interested in seeing how well it all fits? Follow along! More to come...
  3. Crankshaft position sensor - quick fitting question

    Range Rover Mark II / P38
    Hi, I've had to replace the CPS on my HSE 4.6 Gems (no spark, no fuel and a very bent pin on the CPS!)- its the type with a flying lead and blue connector (Lucas SEB805) I've checked the ring teeth through the access cover when fitting it just to be sure, and done a manual rotation of the...
  4. fitting a sliding touch screen head unit into a range rover

    Range Rover Mark II / P38
    I need some help I am sure I am not the only person to try this or even post but I can not find anything that matches my issues I have taken out the standard head unit to replace it with a RK-7158G with a sliding touch screen. The problem I have is that when fitted flush the screen comes out...
  5. Removing and fitting a new front plate and oil pump on p38

    Range Rover Mark II / P38
    Hi Is there anyone who has knowledge of doing this job with images or video Kind regards Elqo.
  6. fitting footwell lights in SE spec (98 GEMS)

    Range Rover Mark II / P38
    Hi @all, after a hard time without a proper car, I came back to RR, again with a P38a. It´s a 98, VIN WA, 4.0 SE. The car is European Spec, LHD, if that matters. My question is, as the car has the wholes for the footwell lights left and right and rear puddle lights, can these be installed plug...
  7. fitting after market amp in place of dsp

    Range Rover Mark III / L322
    Well went and done it again, got me another l322 this time a td6!,:mrgreen:its a vouge with dsp and sat nav, might of been ok in its time but now its like a valve radio!.:???: getting a after market head unit with touch screen sat nav and usb( got to have usb cd's are worse then vinel!:lol:)...
  8. Quick question about roof rack fitting

    Range Rover Mark III / L322
    Hey guys I looked around and I just can't seem to be able to find the info I'm looking for, I was wondering if the mounting points for a roof rack on the Mark III is the same as the P38. Thanks in advance guys
  9. Fuel Line Disconnect Fitting Size

    Range Rover Mark III / L322
    I have changed the fuel pump and would like to change/update the fuel line fittings at the pump. Any idea on what size I would to order? I cannot find any information on what size the 90 degree fittings would be. I am looking for something along the lines of the pic below. 2003 RR 4.4L BMW...
  10. Overfinch third row seats fitting instructions n pics

    Range Rover Mark III / L322
    Hello does anyone have pictures or fitting instructions of overfinch third row seats ,kind thanks ,it's for my 2004 ,l322
  11. Fitting aftermarket radio to HSE

    Range Rover Mark II / P38
    I'm hoping to fit an aftermarket radio to my petrol 97 HSE which has the Harmon Kardon audio system with a Japanese spec Pioneer head unit. I attempted to get the radio I have fitted but was only able to get it powered up and working but got no sound. Did a bit of reading on this site and now...
  12. Transmission pan dipstick tube fitting

    Range Rover Mark II / P38
    A warning to fellow P38ers. I was changing the oil and filter on the transmission and one of the steps is to remove the filler tube from the pan before it can be removed. The large nut holding the tube to the pan was really solid so I used a bit too much force and the fitting started to bend...
  13. Fitting fuel filter water separator a solution for full DPF?

    Range Rover Sport / L320
    Hi all, In short: Has anybody heard of fitting an additional fuel filter water separator in order to solve the DPF Full issue? I drive a 2008 RRS TDV8, and I get the DPF Full warning approximately once every month. My driving habits are totally wrong for this sort of car (short runs and...
  14. Fitting rear camera to RRS 2010 head unit

    Range Rover Sport / L320
    Hello I have bought a 2010 range Rover sport I have got into the multimedia system/ Nav and found greyed out information regarding rear cameras and video inputs just wondering how I would go about getting the module for supplying video on the main head unit. Anyone installed camera oem to a...
  15. Fitting a td5

    Range Rover Classic
    Howzit guys I am toying with the idea to replace my 3.9 V8 with an 18P Td5. Any suggetions as to what would need to be changed and replaced and such? I have the engine and the ECU for the td5 already..
  16. Transmission cooler quick connect fitting?

    Range Rover Mark III / L322
    Hey guys, have to replace my transmission cooler lines on an 06 SC L322. In the past, I purchased an adapter to bolt to the side of the 6HP26 in place of the factory cooler lines. It has 8AN fittings. I got some 8AN to 1/2" barbed adapters, and used hose clamps on rubber line to go to the...
  17. Airline Tee Fitting

    Range Rover Mark II / P38
    Anybody have any good recomendations for 6mm airline tee fittings that DONT leak? I've got one for my in-vehicle pressure gauge thats tee'd into the tank line, but I cannot seem to get the thing to stop being leaky. I've tried the plastic one and the metal one you can get off ebay and whatnot.
  18. Fitting p38 wheels to an L322

    Range Rover Mark III / L322
    I have an L322 2011 and a P38. I want to take the L322 to Scotland on a shooting trip and there will be some off road driving. The P38 has 18 inch alloys with General Grabber AT2 tyres and the L322 has 20 inch alloys with various tyres non of which are All Terrain and much lower profile than...
  19. Top Tailgate Fitting Problem.

    Range Rover Classic
    1984 Range Rover.Struggling trying to fit replacement tailgate . Can't seem to get it high enough to latch.Have elongated the hinges but still not right.The vechicle as had a replacement rear crossmember fitted and I've heard that if the body isn't jacked up when performing the task no way then...
  20. Aftermarket sat nav fitting

    Range Rover Mark III / L322
    Ok firstly hello everyone I've just purchased a RR HSE model 2003 UK spec. with no sat nav fitted, So my question is has anyone fiited an aftermarket sat nav, or what kind of job is it to fit a genuine RR one as what components are required, I'm fairly knowledgable when it comes to playing...
Top