Range Rovers Forum banner
1-8 of 8 Results
  1. Range Rover Mark IV / L405
    I will be installing a built in radar detector soon. Does anyone know of a good grommet or passthrough where I could being a few wires inside the cabin down near the pedals and steering column. Thanks, Paul
  2. Range Rover Mark III / L322
    Does anyone know the part number or have a parts diagram for the firewall seal (flexible rubber) that the steering column shaft uses? 2007 RR Supercharged w/ tilt, telescoping.
  3. Range Rover Mark IV / L405
    Anyone added driving lights? Before you ask why with the HID's that are stock, I drive a long lonely stretch, highway 69 in CO at night often. Lots of mule deer, elk, and the occasional bear. Want to add a led light bar, and the firewall appears very unfriendly to pass a wire through...
  4. Range Rover Classic
    Diesel 300tdi Removing the Injectors - Hitting the firewall bulkhead Hi I have the leaking injector issue with the copper washers. I'm quite happy to do the job my self and I have removed all the necessary parts and have 3 of the injectors out. Trouble is the 4th / last injector at the back of...
  5. Range Rover Mark II / P38
    Hi All, Before anybody says anything, I have indeed already read the information on the rr.net page about this topic. My question, however, involves a LHD vehicle. I was hoping to run some cables through the firewall on the passenger side of the vehicle. I wanted to know how accessible a point...
  6. Range Rover Mark III / L322
    Hi everyone, Great to be here! - I have a 2004 Range Rover Vogue TDV6 and want to connect a front camera to the TFT screen in the cabin. Can anyone advise me as to the easiest way I can run a cable through the firewall in the engine bay? Many thanx in advance.
  7. Range Rover Classic
    While cleaning up the dash wiring I found the end of a vacuum hose coming through the firewall. :???: Tracing it back under the hood it is teed into the line connecting the two items shown in the pics and nothing else. Obviously with an open end under the dash these things are not working...
  8. Range Rover Mark II / P38
    I've searched the threads and I can't seem to find the answer to this... I'm replacing the vacuum tubes on my cruise control, but the longer tube disappears back into the firewall. How do you disconnect this? Do you access it from the engine side, or somewhere inside the cabin? Thanks, James
1-8 of 8 Results