RangeRovers.net Forum banner

failed

  1. EAS Unlock - The Application Failed to Initialize

    Diagnostic Equipment
    I've got a friend who has asked me to get him a laptop that will work with EAS Unlock - he insisted that it runs Windows XP 'cos he said that's all EAS Unlock would work on. I got him one laptop that I had lying around that was running Windows XP, and installed EAS Unlock on it and the minute...
  2. 2000 4.6 EAS failed

    Range Rover Mark II / P38
    can anyone help please against all advice I purchased a 2000 4.6 vogue yesterday the EASwarning came on then today it is now sat on the suspension stops a mechanic I know had a quick look he bypassed the relay to check the pump which then began to run he spoke to a mate who said it will be the...
  3. 89 Classic Failed EVAP part of Smog Test

    Range Rover Classic
    Hello All! My 89 Classic passed the emissions part of the CALIFORNIA smog test but failed the EVAP test. I wanted to check all connections but it seems that the Fuel Expansion Tank along with all it's connections are buried in the body behind the Right Rear quarter panel. Does the quarter panel...
  4. Two failed stats in as many months

    Range Rover Mark III / L322
    About a month before my holiday mid Aug, I replaced the thermostat and water pump on my 2002 4.4. Better safe than sorry I thought as I had a "Activation Map Cooling" error showing which means the electric element had blown in the stat and I wasn't sure on the history of the pump so whilst in...
  5. Fuse 2 failed, seat heater. Why?

    Range Rover Mark II / P38
    Having owned my 2.5 diesel P38 for a couple of months now, I am trying to eliminate a few gremlins.<br>I am strugling with the message ' fuse 2 failed,  seat heater' with the accompanying beeps.<br>I have checked the fuse several times and swopped with others to no avail. Then today I lifted the...
  6. Please Help The Newby :) Speedometer Traction and ABS Failed

    Range Rover Mark II / P38
    Hi All, I have just joined the forum :) I have a P38 0n a 1997 Plate with LPG (4.6 HSE) EAS has been removed and the Becam cheated...with cable thing. I have owned the Range rover for about 6 years and have had very littte problems apart from the usual ball joints and trackrod ends exhaust...
  7. P1639 code & Engine Failsafe - Throttle Body Failed?

    Range Rover Mark III / L322
    Just purchased 2005 RR L322 4.4L V8 with 81,000 miles - great forum that I have found invaluable so far addressing a few minor issues during first 1,000 miles of driving. While recently checking condition of air filter element while air intake was removed from throttle body, I manually opened...
  8. Immobilized, dead fob, failed latch

    Range Rover Mark II / P38
    anyone have any useful ideas? Range Rover P38 1998 2.8 ,, the other day a dropped me mate off at work and the seatbelf got caught in the door, got all the way home locked in using the key(handset doesn't work) come out a hour later and the engine disabled, ive had this problem in the past but...
  9. ViAir Pressure switch Relay combo failed today

    Range Rover Mark II / P38
    After having it for less than an year it failed and over pressurized the system. It looks like it must have been intermittent as it was working fine when I replaced the second line and tested it yesterday. Luckily the blue cheap flexible 6mm line from Fastenal gave out first before it can do any...
  10. OBDII Not connection to reader - failed inspection

    Range Rover Mark II / P38
    Hey everyone, I have a P38 30th Anniv and went to get it inspected however the OBDII won't connect to the reader so they cant get a reading for emissions. Has anyone had this problem/know how to fix it? I have a reader myself but when i plug it in it doesn't power on. Possibly a power fault...
  11. CEL = Failed Smog // Clear P0740 code but CEL stays on

    Range Rover Mark II / P38
    My check engine light has been on for a few months now due to a P0740 (Torque Converter Clutch Circuit Malfunction) code that I can clear with a generic OBD scanner but I am unable to get the CEL to go off. When I took my car to get smogged, it passed everything except for the CEL. At the...
  12. Help! Fuse 8, 9, 10, 20, and 22 Failed

    Range Rover Mark II / P38
    After I uninstalled my audio amp, I went to start my Range and it freaked out. Giving me the message "Fuse 8 failed" "Fuse 9 Failed" 10, 20, and 22. I immediately took my key out, and checked the fuses. They were all fine. I tried disconnecting the battery and reconnecting it. Didn't work. My...
  13. Electronic tailgate failed today

    Range Rover Mark IV / L405
    Unfortunately, my electronic tailgate failed today. It no longer lifts or closes by itself. Actually, it started last week with the bottom section only opening a couple of inches when I pushed the button, but it always closed properly. Now, when I push the button, the top section just unlocks...
  14. All electrics on front passenger door failed.

    Range Rover Mark II / P38
    Hi. New to this site and just bought my first ever Range Rover, a 1995 P38 2.5 Diesel with 2001 facelift. I do have a problem at the minute with nothing working on the passenger front door... Central locking not working, electric window not working, electric door mirror not working, all 3 other...
  15. fuse 8.9.10.20.22 failed all at once while driving

    Range Rover Mark II / P38
    I have a 96 p38 that i think one of the relay is out of whack, does this happen to you. I was driving along when suddenly my abs warning light came on and my radio turned off, hvac turned off, and i can't operate the seat, front windows, central lock. Any of you had experienced this? Where to...
  16. Self Levelling Headlights pointing up too much -- failed MOT

    Range Rover Mark III / L322
    Hi, Just wondering if anyone knows the best course of investigation to take when encountering 'headlight levellling ecu not responding' and, if associated, 'light check module. dimmer potentiometer open circuit' faults. I previously came across this when clearing a suspension inactive fault...
  17. Pictures of Failed Connecting Rod

    Range Rover Mark III / L322
    This was not a pretty site to see when I removed the head. I knew I had a holed block but was hoping that the head would be OK - NOT This is what the Piston looked like prior to removal I had to break up the Piston in the block as I was unable to rotate the crankshaft to remove the bolts from...
  18. Furious about this one, failed inspection due to ebrake

    Range Rover Mark III / L322
    I'm fairly certain I'm getting hosed here, not sure what to do about it... Go in for inspection, they fail me for e-brake... I'm like, "oh ok I'll check it out," assuming it's not working at all. On the way home I pull up to a steep hill, pull the e-brake and the car holds perfectly fine so now...
  19. new noise. Failed wheel bearing?

    Range Rover Mark III / L322
    In the last day I started to notice a strange sound emanating from approximately the front right wheel. It's a sort of whirring sound... kinda like someone put a baseball card in the spokes of my wheel. It's definitely speed dependent, not RPM dependent. So I'm fairly certain that it is drive...
  20. Diagnostic procedure failed

    Range Rover Mark II / P38
    I went today to dealer to get my RR through diagnostic procedure on tester, because of ABS and TC lights on, but it failed. Electrician said that he can't get into RRs system with computer. He presumed that someone before made some changes on electrical system. Does it make any sense to you? Why...
Top