L320/2011 EPB module on top of rear axle is changed. After powering the car, it activates the brake immediately and doesn't release the brake anymore. All should be okay mechanically. Anyone has an idea?

I changed brake pads on my wife's 2015 Evoque. The front pads were a breeze. However, I could not install the rear pads. I got the rear brakes to open up (through ignition>pb switch. accelerator>ignition 2x), but I don't think I was properly in maintenance mode. The old pads came out, but...

Hello, I am hoping that someone can tell me where the emergency handbrake release is on my L320 RR Sport 2012. All of the You Tube clips seem to show a different center console setup. I have taken the handbrake switch out and I can't see it anywhere under there. Any ideas? Thank you

Ok friends My first post here.. I have an 2008 Ranger Rover Sports HSE.. MY EPB is stuck I followed instruction on youtube to find the manual release cable I cant not see it Its Not there.. How do I release it now..

Hi all, I'm new to this forum and I recently purchased a 2008 RRS HSE. I had a screeching noise that was intermittent and a parking brake fault that appeared and went away. Decided to give the manual unjamming procedure a go and was successful. After unjamming, I went and adjusted the shoes...

Can anyone help with the procedure for setting the EPB to service mode. I plan to change the rear rotors, and have found instructions for this procedure, however, I am having trouble figuring out the EPB with the keyless ignition. Info for key version, but this doesn't seem to work for...

A loud noise from EPB unit. Parking brake does no engage.

I have searched around but I can't find anyone who has experienced the same. I recently changed the rear discs and pads on the back of my '55 RRS supercharged and noticed that the handbrake assembly was loose and the pins holding it in place needed replacing. I needed to use the car whilst...

Hello, Had my EPB repaired and now I need to manually set it when I park, while before it was automatically applied when I set into P. Any idea? Thanks!

I am preparing for the arrival of my 2008 SC car which is disabled due to electrical issues. The fuse box has been removed so the electrical system is totally dead and I am unsure of whether the EPB is engaged or not. It may need to be released manualy but have I been unable to find an accurate...

So I just put new rotors and pads on my 2008 RRS HSE. I didn't know till after the fact what a detailed adjustment process there was for the RRS EPB. I just basically adjusted it the similar way drum rotors on other cars are (slight drag)... Since the replacement, I've driven back home but...

I have a 2006 Range Rover sport L320. I have had horrible experiences with the electronic parking brake system over the past few years. The first time the parking brake failed to disengage and locked up my passenger rear wheel, destroying everything. Had to replace hub, spindle, brakes... Over...

I have 51k on my 11 RRS and I replaced rear rotors and pads with genuine parts at weekend. (Fronts done late last year) I re-adjusted EPB pads by feel as I did not have socket the correct size for the hub retaining nut in order to check torque. After bedding in the rear external brake pads I...

Hello folks, Is there anyway possible with this complex electrical system that we have on the 2006 RRS HSE, that an inactive/broken EPB actuator could throw a suspension error message - yellow or red? The error indicator is the vehicle with the arrows on both sides of it. Curious as lately...

has anyone seen this TB before or had it done?

I've been on a sublime 4x4 trip in Colorado this week and tackling some awesome trails with tons of rocks and plenty of mud puddles. I guess some mud got into my Electronic Parking Brake (EPB) and the next time I used it, it didn't release all the way. I could smell the cooking brake after I...