Range Rovers Forum banner
end
41-55 of 162 Results
  1. Range Rover Mark III / L322
    I have a 2005 L322, with 165,000 miles, and all original EAS components. I always set the car in access mode when stopping to get out. Yesterday, when I started driving, the front end would not raise from access to normal height, but the rear end did. I could also get the rear end into extended...
  2. Range Rover Mark II / P38
    Hello everyone, Been registered here for a bit, but I don't remember ever posting... So... Victor, from France, currently struggling to identify a loud screeching noise front the front end of my 99 4.0 P38. I've read loads of threads here, just like when I had the wobble of death, but I...
  3. Range Rover Mark III / L322
    I have researched this to death, but have not found any informative information. I get a vibration that feels as if it is coming from the right rear end under slow acceleration from a stopped position, more so if making a right hand turn. If I let off the gas during the vibration is lessens or...
  4. Range Rover Mark II / P38
    Ok It's now getting me down (the joy of RR) Just rebuilt top end due to gas in the water and top hose pressure problems, All seems great when cold tic over is sweet, can easy rev to 3000 revs, and even drive down the road like a new car. Get to running temp and the she misfires at around 1500...
  5. Range Rover Mark II / P38
    My Story, Well i've had my 4.0l Gems for just over 5 weeks. Spent many a happy hour sorting the EAS, Window switch pack, Central locking, Window regulators, fan control etc. Now it's time to decided to spend many more hours and either a little money or a lot of money? When i brought this RR i...
  6. Range Rover Mark III / L322
    Good Morning all, new to the Range rover world here. I recently picked up an 03 RR HSE with 140k on the clock. I have recently been blessed with an air suspension problem which is as follows The front end is completley raised up as high as the air shocks will let it go while the rear is at the...
  7. Range Rover Mark III / L322
    I have the dreaded 3 amigos ... I have had my wheel speed sensors swapped on front wheels but still end up with "open circuit front right" error had the wiring changed from the wheel sensor to the unit and "voltage" or whatever is measured is ok. Had a new steering angle sensor fitted about 4...
  8. Range Rover Mark III / L322
    I've read almost every thread on the subject and they all seem to point to different solutions or no solution. They describe clunks when turning over bumps. I've read drop links, bushings, brake backings, new shocks, new/tighten anti-roll bar, steering rack, new lower/upper control arms...
  9. Range Rover Mark II / P38
    It was a sad week, the '98 started running rough, and stalling out with a CEL light. Brought it to the dealer, and found out there is coolant in cylinder No. 5. We decided not to fix it, at least for now. Sadly this was the replacement engine with only 25k on it. The plan is to garage it for a...
    end
  10. Range Rover Sport / L320
    Unfortunately a driver lost control and swerved in front of me yesterday. My car had to get towed to a nearby body shop as the passenger front end "gave out". I take great care of my car like many of you on this board so I think there is a dramatic sense of loss whenever our cars get damaged...
  11. Range Rover Sport / L320
    I broke one over the weekend. When I try and back the nut off, the entire thing spins. Is there a way to stop it from moving while I back the nut off? Thanks fellas.
  12. Range Rover Mark III / L322
    Hi all, thinking of putting a 2010 onwards front end on my early (2002) l322, does anyone have a full list of parts required, and is it an easy job?, thanks in advance
  13. Range Rover Sport / L320
    The other day I go pick up my winter wheels, freshly refurbished and powder coated in satin black, and fitted with brand new Blizzaks. Because I feel so good about the car that day I decide to drive through an automated carwash on the way... Bad call!! Turns out this car wash ripped off the...
  14. Range Rover Classic
    hello, i have a 95 lwb county with a 4.2.my rear end is clunking and have to fix it.my question is, would a rearend out of a 98 disco bolt right up,or would the chunk and axles go in the 95 first one i have own and worked on.
  15. Range Rover Mark II / P38
    Hello all! A little/quick back-story Proud owner of a '97 4.6 HSE up here in Maine. We bought the truck from an acquaintance a few months back, and spent time doing little things to it (heater core o-rings, wiper motor, etc). Of course as soon as we begin driving it, the truck starts to mark...
41-55 of 162 Results
Top