eka

I have a p38 that needs the EKA code putting in but it wont accept the code and keeps going into a 30 minute lock out. i have tested the micro switchs in the door latch and they all work but the motors are both burnt out would this effect the EKA code being input. The side light warning light...

Does anybody know what the signal should be from C362 at the LH door outstation and the BECM when operating the key switch? Lines 1, 9 and 10 are my suspects Also, does anything change when 'alarmed' or so? I am still trying to sort out a lock mystery.

Hi. I've got a 4.6 that's been sat on the drive for a month, dead battery, key code lockout, wait 30 mins, blah blah. That's fine - been here before. I'm doing everything in the sequence right, but I can't get the door lock to recognise that I'm trying to enter the code. Normally it beeps and...

Hi, After a battery change mishap in my 1995 P38, my engine is immobilized due to Key Fob can't sync. I don't have an EKA code. Contacted customer care in Australia who contacted UK, who said : "Regarding your EKA code request, from the VIN details received, due to the age of the vehicle...

Hi all, I am new to this forum so please accept my apologies and guide me in the right direction if this question has already been answered. I have a 1998 Range Rover P38 and I am hoping that someone will be able to assist me in finding my eka using a Hawkeye Total. I am ok but not great on...

Hi guys, Can anyone explain to me how this can be done? I have done some research and found that it is possible but I have not found a clear method of doing this, I would really appreciate it if someone can help me out, I have "Key code lockout" on the display, it is a project car I am working...

I think I am having eka issues, my range rover won't even let me turn the key once in the ignition. I replaced the fob battery (I had this issue this morning before I replaced the battery) with a durcell battery that is new and no power or lights come on the rover, ignition won't turn and I have...

Maybe this is a coincident, after i had put my EKA code in using the key in the drivers door, the power lock on the driver door (LHD) stopped operating? I can hear the engine inside the door and all other doors unlock when I press the key fob. Has this happened to anyone else? /Erik

My battery went flat at the weekend, I jumped it and started it using the EKA code. All was well and the code worked fine and I was able to drive the car again. The battery flat again on Tuesday so I took it to work, charged it and tested it - dead. I ordered a new battery, a nice strong 830...

Are Australian delivery HSE's supplied with EKA codes, if so where can I obtain a code for my recently acquired 1998 HSE 3rd owner & I have the original books etc but no sign of the code listed anywhere. I don't want to be caught out not having the code in case the immobiliser gets activated...

Hi all, Amazing community here that I've been happily lurking amongst before purchasing a very tidy-*looking* 2000 4.0SE (Thor apparently) that I picked up yesterday. Everything went well on the two+ hour drive home with a couple of stops along the way. Some perfect running around last night...

RR 2000 4.6 HSE We had a flat battery problem and took it off to charge over night. It wasn't fully charged but garage said was more than enough to be OK. When we re-fitted it the key worked fine to open, lock and start the car. We drove a short distance to our nearest shopping centre and we...

Hello there , I recently bought a P38 DSE and thanks to this site fixed the eas, and hot starting issue, without the ebay gizmo, but now I and fearing that I cant find the solution on here except to remove the becm and send it away to be unlocked? Key fob has never worked and I have got on...

hi all yet another problem.... few days ago me and a friend was changing my power steering pump and the battery was left off over night. The next morning when we continued i but the battery bacck on to find i had engine disabled. my friend then showed me how to use the keycode that was in the...

EKA - door switch broken, entering code with wiring - managed it, but unsure how! I've had to do this a few times and I've been successful, trouble is, I can never remember how... I suspect my door switches are dodgy, I know for certain the door ajar switch is - if the wire for it is connected...

Hi all, would really appreciate a bit of advice on this. I know EKA issues have been covered extensively on this forum, and believe me I've read most of them - I'm just convinced there might be something slightly different with my issue. I'm located in Edinburgh, and the vehicle is a 2001 P38...

I have a 2002 Range Rover and the battery died while my daughter was in college this fall. I replaced it, but now I am unable to start the car, as the alarm goes off. I have tried the EKA 1515 code with no luck. I just realized that the passenger front door will not open and I am not sure if...

EKA code problem and lockout, and Nanocom codes strange readings Hi guys, having a big issue getting my Range Rover P38 2.5 Diesel to start after a flat battery, the problem started after reconnecting the battery after fully charging it, I had the key in position II in the ignition without...

Hi, Posted last week about a P38 I was looking at with electrical issue. Basically key fobs were not being recognised and the guy selling it had been using ska code to start. Decide to go for it as it was an OK price and I cold spend a few pennies sorting the issue. Other thing is battery...

1996 P38 Rangie wond accept EKA engle disabled all normal fixs tried Hi Hope someone wise can help me please. Alarm has not worked since i bought the Rangie. This weekend while parked it suddenly started working. Have tried entering the Eka code, side lights flash with every turn of the key...