dumb

88 RRC - can you replace the blower fan for the heater without pulling the heater core? PO replaced the heater core a couple of years ago, but the heater fan is grinding and howling!

Apologies in advance for this, but I think on my 2004 Rover, DSC/traction control is being used to emulate locking differential(s) to send power to the wheel that has most traction. Coming from a RWD BMWs, I often had to turn DSC off, as it would sometimes cut throttle off, while I needed that...

I have looked for the answer to this question and consulted the manual to no avail. What are the three (3) green bar graph indicators just above the trip computer/odometer display? They display via the turn signal lever button interchangeably with date, trip, etc. Intuitively, they seem to...

Fix list (+ dumb ?'s) for my "new" 1991 RRC Great Divide Edi ** just picked up a 150k SWB "Great Divide Edition" and am sorting through it. Major mechanicals checked out and given blessing by independent local land rover garage in Connecticut where I bought it. Truck was originally from out...

...this plastic engine cover off?? I've gotten the front loose, but something is still holding it on in the back and I can't figure out what.

When doing some soldering work on the dash clock I blew fuse #1, finished the job until dusk and replaced fuse #1 with a spare 10amp fuse from the under-hood fusebox. an hour later started the engine and got a "airbagfault" message, spent all evening searching this forum for possible causes...

2006 RR HSE L322 4.4L I have a crack in my air duct where the duct connects to the filter box right after the MAF. My question is, could I put a connector hose in place of this until a new part arrives? I am wondering what purpose these baffles perform? (circled in red). My RR keeps throwing a...

Heres a really dumb fuse panel question. My Truck is a February of 06 built HSE, last VIN numbers A2227XX. Went out to check one of the fuses in my rear load compartment fuse panel because my power receptacle in the cubby and rear cigarette lighter doesn't work. Fuse should be fuse no. 7...

Have my rear brakes apart now waiting for new discs and pads. Tried pushing the caliper pistons out a bit using the brake pedal but they don't move. They have been working before with the engine running, they've been removing the rust buildup anyway. Do the rear brakes not work without the brake...

Excited to read and learn....bought an 04 HSE in So Cal this past Feb for our big move to CO and all the snow...been paying the price literally and figuratively ever since. The more I spend to repair it the more committed I am...wife won't stop reminding me, hence the handle!

Still new to the truck and haven't had the wheels off yet, but I've been reading about service etc and everyone mentions Brembos vs non-Brembos in terms of pads, how to change them, etc. Is there a quick way for me to tell if I have Brembos or not? I have an HSE and the calipers are red -...

This might be a dumb one.. But I'm gonna shoot anyways... Rear air vent ?? 2010 RRS supercharged.. I can't get air to blow out of the 2 vents in the middle of the center console for the rear passengers.. Is there a setting on the climate controls?? I've played with the dials on the vents.. etc...

Ok, the Sport/Manual mode button on my 99 HSE turns RED when in sport mode (says SPORT) but in manual mode there is no light. Is there supposed to be a light that comes on when it is in MANUAL mode or is that how it is supposed to be? I know, this mat be a really dumb question.

Today I was looking closely up under the rear of my 08 Sport. There are weights that are mounted just above the mufflers. I noticed that they swing forward and aft. Can some one tell me what they are used for?

But how would I know if I needed an oil change? I have a 2010 RRS I purchased a week ago with about 36k miles on it and I completely forgot to ask when the last time the oil was changed. When I check the oil and other fluid levels everything looks fine.

bought the xlc coolant from the dealer for my 2010. Do I need to add water to it like a 50/50 mix or can I just add to the tank?