Search Results for ‘drag’

Hi guys, I've been trying to sort out the vague steering and "crashy" ride on my 1998 P38. I have replaced the anti roll bar bushes and drop links plus the front panhard rod bushes so far. The old ARB bushes were yellow polybushes so I think they were Britpart ones. I seem to have cured 90% of...

Hi All, I have a quick question. At some point I bought two tie rods ends part number QFS000010. I was probably making the assumption that there was only one on each side and two of these would replace the worn units. Anyway, I can't remember the logic when I bought these a couple years ago...

Trying to figure out if the ball joint that connects to the pitman arm on the drag link is the same as the ends of the tie rod.I don't need to get the whole assembly to replace one worn part. My local part store has the tie rod ends...Or, is there compatable part from a different vehicle? My...

For all you SVR owners drag race between SVR and racing truck. http://www.pistonheads.com/tv/film/video-range-rover-sport-svr-vs-racing-truck-drag-race Enjoy

Slowly degrading Transfer Case or other drive train "drag"? I'm getting a little "drag" when driving and can't find the source. All fluids, oil, diff, transfer case, transmission are fresh and filled properly. No leaking boots on half shafts or CV joints...nothing I can point to in the mid...

If anyone knows what happens next, I'd certainly appreciate a hand...here's my tail of woe: 1. Changed Battery 2. Got the EAS Inactive Suspension Warning 3. Ignored it for weeks, car behaved just like normal, no sagging, no nothing, just the error message (and no suspension controls) 4...

Went drag racing this morning towing my Corvette with my HSE. I blew the Corvette tranny on the second time run. It was either go home and put my spare tranny in for tomorrow's race or unhook the trailer and run the RRS a couple of times. I chose the latter. I made two time runs. The first was a...

i know its been done before and I think the only thread I found on someone doing it was Jos so thanks for the idea `) ....grabbed a used track rod and drag link at the pick and pull for ten bucks...cut the ends, cut mine, welded the adjustable ends on mine and 72 bucks later all new rod ends and...

my tied rods are shot....I modified my drag link and tie rod to be able to screw replacements in each in as needed. I can find the tie rod ends online to order but I am hoping to find a compatible cross reference I can pick up at a local part store...i am having no luck calling all of them and...

Ever get to a stop light, see there aren't any cops, the road is clear and straight… thinking to yourself, let's do this! Switch to sport, make sure you're in first gear, ready floor this mother lover? Well this feeling kicks in all the time, especially at night. Once in a while you get lucky...

I received my new drag link today part no. Qhg000070r.m8 and to extend it to the same length as the old I run out of threads! There is at least 2 inches difference in length of the bars?? Anyone experience this before?

Hi guys, I need to replace my LHS radius arm bushes. To remove the radius arm, I need to remove the drag link first, as per rave. I removed the LHS drag link ball jt nut but unable to remove it as the rod is almost touching the radius arm. Can someone tell me how to do this as I'm stuck...

I will be taking the S/C to the drag strip in the next couple weeks. I saw one member did an Auto X. I'll post back my numbers. I would think 13.7-14.0 at 102-104 or in that area..... PBIR in S Florida.