Hi all.... My 2001 RR has a fully working factory fitted sat Nav unit, but I want to take it out and mount an android tablet in that space, to use Google maps & Spotify (I've already added an aux input to the stereo) Since I don't want to take the console apart until I have to....does anyone...

Hi all, I have a noisy lifter in my P38 engine and adding some lifter tune up has not solved the issue so I intend to replace them. While I am at it I am thinking very seriously about a set of smiths adjustable pushrods I know that the standard pushrods are 8"/203.2mm long and 5/16"/8mm...

Hello all, I am looking to have 50 mm air spring spacers fabricated for my p38. I need to know what the measurement on size and exact shape is for the d shaped hole that they will need to have in them. i have been reading on paulp38 lift guide and that is the only dimension i really need. i can...

Hi folks. I'm away at the minute but I need to find out the diameter of the inlet and outlet on a standard mid-box from a 93' Classic, 3.9 V8. Do any of you know off-hand? Thanks

Hello all, I have a question regarding the dimensions of the Land Rover spring seat (PN NRC9700) Here is the spring seat that I am referencing: Image, Webpage, I have a Atlantic British Coil Conversion on my 98 p38, and I am looking to put a one inch spacer to level the front end. The setup...

Hi guys. Can anybody confirm the speaker dimensions for the front door of the 93' 4 door Classic? It seems there were several variations. I've removed the speakers to take the measurements but to be honest, I still don't know what size they are. Anyways, the upper speaker grille is 10 cm, the...

today i have tried to replace the faded radius arms pushes, i had the arms removed in workshop and sent them to engineering workshop to press the new britpart replacement part but the guy there told me i can't press because the new pushes are larger than the existing one, then i confirmed what...

Hi all, I was hoping somebody would know the exact boot dimensions for the RRS? Many thanks

I have recently bought a 2002 Range Rover Vogue 4.4 with what seems to be a westfalia detachable tow bar set up. However the towbar was missing when i bought it. So, I'm after the dimensions of the tow bar, mainly the box section size ( height x width x length ) , thickness and also the hole...

Year 2000 4.0 HSE a little overdue for an auto transmission fluid and filter change has a stripped out 5mm hex socket in the drain plug so removal is going to be destructive. Does anyone have thread and sizing data for the plug so I can make a new, better quality, one ready to put in...

Hello, One of my friend would like to make an uniqe roof rack for his Range Rover, and maybe could you help me out? Could somebody help me with some correct dimensions/patterns of the rack installing points (i don't know how is it called in English) on the roof, because i haven't find anything...

Hello everyone! First post and new to the forum. I am sick of my car and ready for something new. I have always had a passion for the Range Rovers. My budget limits what year I can afford so I am looking in the range of 2002-2005. I was first wondering what the height of the roof is on the...

After a myriad of searches on the internet I decided to create a list of shock absorbers that could possibly fit the P38. I have attached it to this post (hopefully) for all to use. Note that this is my own take on the subject and there are several sections of this that have not been checked...

Hi guys I've recently come to the realisation that a P38 is no good to replace my stolen Toyota Surf because the boot space isn't big enough to carry all my weekend yachting gear. I'm interested in a Range Rover as a more luxurious option to the Toyota but the boot space needs to be viable...