Search Results for ‘cup’

Is the front center cup holder cover electric or maybe its just jammed open. Cant seem to close it ?

I'm picking up my 2018 HSE on Wed and I've seen some photos with the iPhone cup holder charger. I found the accessory for the Velar but is there one for the HSE? Thanks Gary

So wife informed me that the passenger push to pop out cup holder on the dash, broke and dropped a tension spring (metal band that is in the retracted shape of a straw about .5 inches long.) Is this a simple fix or bite the bullet and find a replacement. I know how to remove the offending cup...

Hey guys, So, coffee cup in the cupholder spilled this morning and quickly disappeared. I read on here this morning that it drains into the vehicle somewhere, however, the drive this morning went on without a hitch. Fast forward to 8 hours later leaving work, and about 2 minutes into the drive...

Just picked up my RR SVR this past Sunday, having been aware of the potential issue with the cup holder tray sliding forward during driving. I realized after a couple days that this was a real problem, so I tried thinking of various solutions. The most obvious being...magnets! I bought a kit at...

All, I've recently wanted to use this socket to power up a dashcam, it is dead. I've checked fuse 60 behind the glovebox and visually it is fine, but swapped it out anyway and retested. Socket still dead, even with the ignition on. So, anybody ever removed this, or know how? The other issue is...

Fellow Rangey devotees I am hoping beyond hope that someone out there can help me. I have recently purchased a 2013 RR Autobiography 5.0 V8 supercharged and I absolutely love it, the power and performance is earth shattering. My issue, which by the way is sending my mild OCD into overdrive...

Hi fellow forum members. I have a 2008 RR HSE and the other day tried to lower the center rear armrest to use the cupholders and noticed the release switch is loose. Does anyone have any tips on how to take this ting apart and fix? I don't see any screws anywhere (it looks like a sandwich so If...

Hey guys, just wanted to show you how I mounted cup holders in my 94 RRC. I was going to mount them the same way as in the discos but it was quickly apparent that wouldn't work because of the transfer case shifter. I used #10 screws, 1.25" and 0.75" long. I started the hole with an awl, and...

How can I get a replacement slider? Any thoughts? To keep it short, I had some work done on the truck and got it back with one pane missing, from the slider over the cup holder. Part 15 here...

Does anybody have a good way to make the cup holders more user friendly? I'm having to wedge versus just slipping plastic bottles and 12 ounce cans into them. The rubber surrounding the holders can't be removed from what I can see.

During my quest to open my glove box I broke the plastic bracket that supports the cup holder under the passenger side AC vent. I cannot find a part number anywhere. Does anyone have a number and/or/ source for this bracket? It is "U" shaped and has a hole in the end for securing the cup...

Hello, I recently purchased a new Cup-Holder and Switch Assembly from Land Rover. I have a 2012 Range Rover Sport HSE Luxury. I have searched the forums and web, with no luck. Outside of paying for a day use on TopiX, I figured I would reach out to see if anyone has done this? Or has a .pdf...

I was able to make a functional retractable passenger cup holder. There were 4 problems. 1. The gear driven spring was missing. 2. The pin that holds the expanding arm in its track had lifted and bent. 3. The track this expanding arm rides was cracked. 4. The frame where this arm enters...

the cup holder on the passenger side seems to be jammed or stuck. is this a known issue. i tried prying it open but no luck getting it to pop out. is there a fix other than replacing that anyone knows of? 2006 RRSC 4.2

Does anyone have the issue where the cup holder inserts come out too easily when removing drinks? I am using regular size drink containers/cups but seems like something is wrong for them to come out easily. Any thoughts?

So the other day I get a medium drink at the drive thru at Chik Fil A and put it in the cup holder. A minute later I pick it up to take a sip and the cup is empty!. Yep, I had a sharp tack sitting in the cup holder that had punctured the cup and it all run into the cup holder. The liquid in the...

OK, I have searched all over the web, thru this fourm and a couple of other places for how to repair the cup holder. Pretty much the best answer I have is to replace the whole thing. I saw something today that made me think... What if you removed the spring from the whole thing? Wouldnt it just...