cross

Hi folks, Does anyone know whether it is possible to test the wiring for the front cross link valve? If it is possible how would you do it? do I have to remove the suspension ECU and check the plug pins and to the cross link valve? Thanks in anticipation

Hi folks was taking a road less travelled at a slow speed the other day when the air suspension went into soft fault mode (air suspension disabled). Got back onto the highway parked up on the side and switched the engine off and then after a couple off minutes switched it back on and the soft...

After overhauling the gearbox I managaed to cross thread the last bolt on the tc. 2002 l322 v8 vogue. What’s the best way to proceed? Can it be helicoiled in place? Without removing the flex plate?

Anyone know the length, tip to tip, of their L494 cross bars? Are they interchangeable with cross bars for a 12-15 Evoque? Looks like the clamping mechanism is the same, but I’m curious if the Evoque bars are long enough to fit a RRS and if anyone has tested the fitment ??

Need to replace my exhaust system from front to back and obviously the cross member needs to come out. Where's the best place to support the transmission. Am I ok just placing the floor jack under the pan?

I'm having a bit trouble getting my 2000 Range (LHD) to run straight ahead, it pulls persistently to the left. Get's worse at increasing speed. Just ordered new bushes for radius arms, got here yesterday. Until i get them changed, I'm planning to interchange the wheels, as in change position...

Hi guys. I, usually, hang out at L320 tread but my business partner drives a 2007 RR HSE. His RH side tail light lens fell apart and while we're hunting down for an alternative to spend $350 on new one, I'd like to ask you if it is possible to install tail lights from newer models 2010,11,12? If...

Basically My car sounds the exact same as the range Rover in this video clip ! Exact same sound as that one and very loud in the drivers cabin! Does it on accelerating the same as the video . Any ideas? Exact same noise /engine sound my car has in this video http://youtu.be/Au5k8as3JD0

Hi, all If everything goes well, I will be picking up an RRS I have been looking for. I am actually planning to drive it back either all the way or some of the way. The goal is to do some sight seeing along the way (while driving). I am willing to make 1-2 hr detours along the way to see...

Hi, I purchased a set of Denso SC20HR11 from online and my local indi RR shop is going to install them. I dropped it off today and they told be they are the wrong plugs. I have checked several websites and they all list the Denso plug for 2010 RRS Supercharged. Can anyone confirm if they are...

I wanted to post some cross reference numbers and my experience in changing the expansion valve on a 1994 RRC LWB, since it took me a long time to research it, and I learned some cool things along the way. The original part, RTC6143 is not available. A/B even suggested I try to find a used one...

Anyone have roof rails and cross bars installed on a 2013/14 RR? Any mudflaps installed? Any photos of either? Not that many newer RRs in my area of LA yet and none I've seen have anything on the roof. No mudflaps to be seen either. I have always installed those on my SUVs and I'm surprised...

i am currently in the process of procuring CDG brake discs for my P38 as i am made to understand that they increase stopping power and due to the fact that they are cooler than the original set of discs. has anyone tried this and has it made a difference??? vinay

Air suspension, front cross link valve. Do all 2005 models have it? My right front air bag went recently. It wansn't gradual, it was more like a pop and the air just hissed out rapidly. My first hope was that it was a line that popped off, either at the bag or at the front crosslink valve. I...

Could sombody please tell me what the cross is for on the tailgate window of my 2000 p38 vogue.

Can anyone provide some insight as to why when I use my driver seat adjusting switch it adjusts the driver's side mirror and not the driver's seat ? Thank you in advance for any insight, Verdi

Looking to buy roof rails with cross bars, i can get a decent deal with OEM ones, dont want to run the risk of buying some ones from china. How is the install for the rails? Are there pre drilled holes already in place on the roof? Hows the clearance with the cross bars, do they stick up quite a...

I'm currently towing a 5x8 uhaul cargo trailer loaded with a washer and dryer, 3 aquariums 75 125 and a plywood 200 gallon , and full with house hold items and clothes. Trailer is 900lbs empty can't really be more than 1000lbs of cargo. I'm about a few hundred miles in and currently driving in...

HELLO. My '97 RR HSE needs a front axle seal, LR Part#FTC-4822...Does anyone know of the cross reference part# to a Timken or SKF part#,etc? I need to locate one tomorrow am in Chicago. My local dealers do not stock one plus I'd rather buy Timken,etc.. Many Thanks, Brian

anyone know where it is? got a hard fault due to lifting the rear of the car with a heavy trailer :shock: I've unhitched the trailer but I'm left with the rear frozen in an unbelievably high state `) so need to manually lower the rear to a safe level so I can get to a LR dealer for an EAS...