RangeRovers.net Forum banner

convertor

  1. scratches on Torque convertor

    Range Rover Sport / L320
    Hello, Well since a year ago my car makes occasionaly weird grinding noises coming from the gearbox area, while accelerating, while driving at constant speeds, while deceleratin,... the noise stops for a while when I press my throttle or brakes.. half a year ago a mechanic replaced my TC with...
  2. why do flywheel and torque convertor bolts need replacement?

    Range Rover Evoque / L538
    Hi! This is my first post on this forum. My brother took his 2013 Evoque in for service and the dealer came back with a long list of things that need to be done including replacing flywheel and torque converter bolts. I've never encountered this in any of the cars I've had. Is this a common...
  3. Torque Convertor or flush n fill.

    Range Rover Mark III / L322
    Hello Im having the vibration hum issue on my 2005 Hse. Yes the revs are dropping with the noise. I read all post pointing towards the torque converter. I purchased a remanufactured unit from torqueconverter1.com. My questions is....Should I try a full fluid flush(11 liters) or half fluid...
  4. Torque Convertor noise ??

    Range Rover Sport / L320
    Hi all, i have just purchased from auction a 56 plate 2.7 hse sport , it has 183k on the clock with full history and 2 owners, as i was driving home i noticed a noise when i took my foot off the gas, almost like it was releasing air under the car, when i put my foot down again the noise went...
  5. Torque Convertor Spigot

    Range Rover Mark II / P38
    Could someone please help me with what might sound a stupid question. I'm just about to fit a secondhand Turner engine into my P38, should the TC spigot be greased, lightly oiled or left dry when mating the TC and flywheel ? I've also changed the flex plate as it had a few very small cracks...
  6. Code P0420 Catalytic Convertor

    Range Rover Mark III / L322
    My 2006 Supercharged has been throwing this code for the past couple of months. It indicates bank 1 catalytic converter, am I right to assume that this is the passenger side? Truck has 139k miles on it, has anyone tried welding in aftermarket units?
  7. Catalytic Convertor replacement

    Range Rover Mark III / L322
    I need to replace one of my catalytic convertors After much searching it appears that BMW X5 cats are about a third cheaper, they show up as the same part number but the prices are different http://www.cats2u.co.uk/28897/Catalytic-Converter/BMW/X5/4.4...
  8. Trailer Wiring to convertor - HELP

    Range Rover Mark II / P38
    My '97 4.0SE has the factory 7-pin trailer plug integrated into the bumper. I need a flat-4 plug for my utility trailer. I bought a converter, and cut the factory harness off behind the right taillight area. Now, I have 7 wires coming from the factory harness, and 5 wires on the converter. I...
  9. 2004 L322 Torque Convertor shudder -V8

    Range Rover Mark III / L322
    I noted on another post the remedy for Torque shudder for TD6D3 was to double flush the transmission fluid adding Dr Tranny both times - has anyone had success with this? Or do you have any other cunning alternatives ? I'm staing down the barrel of a $3000 replacement otherwise - gulp! Cheers...
  10. Help refitting a torque convertor

    Range Rover Mark II / P38
    Hi, Looking for some help, my P38 4.6 has been undergoing some restoration and modifying work, at last about to refit the rebuilt engine, when I removed it I took the engine and auto box out as one unit.. that was a huge pain as only working outside on driveway.. however refitted the trans on...
  11. Torque convertor bolt removal

    Range Rover Mark II / P38
    Hi can eanybody please tell me how to remove the torque converter bolts from the p38 cannot find them tried thought bottom of gaerbox plus startermotor hole and small hole on back off sump do Ihave to take the sump off /:( help pleace .
Top