RangeRovers.net Forum banner

connector

  1. Connector Part Number

    Range Rover Mark II / P38
    Does anyone on here know how to identify the manufacturer code for connectors used on the P38 ?? I need to replace the 2-way connector for the heater core temp sensor, or maybe just the sockets inside the connector. Pete
  2. Ignition Module 2 vs 3 pin connector

    Range Rover Classic
    So I bought a distributor (dizzy) from Jegs for my 95 RRC. all is great with the exception of I received a 2 pin as opposed to a three pin module. Not a biggie, but I can not confirm one thing. Which pin is the + and which is the - on the module. I was able to determine what the three pin...
  3. O2 Sensor Connector

    Range Rover Classic
    I have a 95 classic rover, and the O2 sensor connector at the chassis side just fell apart. So it needs to be replaces. It is a round three pin plug. Anyone have a potential source for this connector. I am not having much luck finding one. thanks in advance
  4. P38 EAS pump connector

    Range Rover Mark II / P38
    Hi guys, I had an intermittent fault on my 1996 P38 EAS pump, in that it was in perfect working order, but it was not turning on all the time when it should. I have managed to track down the fault to the four wire female connector on the wiring loom into which the compressor lead actually plugs...
  5. Phone Connector - 2010 RRS

    Range Rover Sport / L320
    Hi Guys/Gals, I apologize if this have been addressed previously. Does anyone know how I can connect my android phone to the RR thru the port that used the iPhone cable that came with the truck or the usb connector so I can play music files from my phone. Or, if anyone knows of another...
  6. Rain sensor wiring and connector

    Range Rover Mark III / L322
    Hi there I've not long has my lovely 2006 L322, investigating the rain sensor not working I found it not connected but worse the plug has been pulled off. So, firstly any ideas where I can get a plug? Secondly any ideas what the wiring is for the plug? Thanks in advance
  7. Wire connector "clip" (after new coil/misfire)

    Range Rover Mark II / P38
    I finally got round to replacing the coils (4.6 v8, Bosch) - it had been misfiring on 5+8 - it seems to have "cured" it, other than a couple of times when I was out for a drive. Going to see how it settles down (and maybe switch the nearly-new sparkplugs round, just in case.) Anyway, to the...
  8. Airbag connector

    Range Rover Mark II / P38
    So I have just failed the MOT due to "airbag fault" ('01 Range Rover Vogue, 230 000 km). Usually this fault code goes away if I reconnect the yellow connector under the seat after spraying some electric cleaner on it. When I tried this before my MOT appointment the connectors wouldn't connect, I...
  9. Battery Changed... Mysterious Extra Connector?

    Range Rover Sport / L320
    I have a 2010 RRS (non-supercharged). Last week, my battery just happened to die at a gas station right across from an O'Reilly Auto Parts. I ran across, bought a new battery, and installed it really quickly. Just finished tightening up the brace/bracket when I noticed that there was a dongle...
  10. 2013 RR Sport - Intermittent problems with iPod connection

    Range Rover Sport / L320
    Hello! I have a 2013 RR sport with the iPod connector in the center armrest. I've used this without issue for several months. Recently, I started having an intermittent problem where when I get into my car + start it, the screen says "Connect device. It's basically not seeing the device...
  11. MFD connector pin 12 black wire , wheres it go ?

    Range Rover Mark III / L322
    Hopefully straight forward question, Range rover 2002 L322 petrol V8. Just looking at Rave wiring diagrams showing Multi Function Display plus in the description it does not show or mention a black wire. My car has a black wire in pin 12 of the power plug and also a black wire in the video...
  12. Stray Connector in Engine Bay

    Range Rover Mark III / L322
    I'm finishing up the timing chain job and am stuck on the last connector. This connector is a 2-pin fuel injector style connector. It's on the end of about 4 inches of wire that comes out of the front of the wiring box above the RH valve cover. That's the box with all the coil and injector...
  13. Door jamb connector corroded

    Range Rover Mark III / L322
    On my daughter's 2003 Range Rover, the driver controls will not roll down or up the other windows; although they work fine from their respective doors. Also, when locking the truck with the remote, all doors lock except the driver's door. Have to lock and unlock it with the key. After doing...
  14. Electrical: LSE 93 Under dash : relay bypass + connector not used

    Range Rover Classic
    Electrical: LSE 93 Under dash : relay bypass + connector not used While opening up to massage a sticking interior lights relay I noticed a couple of details I did not understand, pictures attached. 1: A 13 pin connector left of the steering column not connected to anything. What is its...
  15. Strange ODB connector

    Range Rover Mark III / L322
    Hi all, Before changing the air spings on my P38 I want to be sure I can use the EAS Unlock software. I made the cable myself but does the solution not work. After having checked, re-checked my cable I found the ODB socket was missing pin 11 et 12 supposed to carry the EAS Tx and Rx signals...
  16. Help identifying red connector

    Range Rover Classic
    Hi everyone. I am almost finished my complete nut and bolt restoration on my Classic. Everything seems to be in order, except for one or two anomalies. One in particular being a red electrical plug. It's located along the right hand side of the engine bay, as in right hand side of vehicle, near...
  17. Fuel injector connector repair [?]

    Range Rover Classic
    Anyone tackle this repair before? What parts did you use? Work plan/flow? My fuel injectors are brittle, one is completely broken and has exposed bare wire. Was wondering if I can just buy Ford fuel injector connectors from summit racing and splicing in or if there are any peculiarities with...
  18. need help with connector B pin 8

    Range Rover Mark II / P38
    rave says this wire (white) is the ignition sense wire....but I can't find in rave where it goes. I see it splits off into the fuse box, but there is part of it that goes back to the coils. can anyone help tell me where that part of the ignition sense wire ends up? mine got burnt and i cant...
  19. ABS Booster connector

    Range Rover Mark II / P38
    I am replacing the wiring loom and connector which plugs in behind the ABS booster, but can anyone tell me what it actually connects to? I thought it was the ECU, but I see from the workshop manual that this is on the other side of the vehicle. Thanks PACLX
  20. 2003 L322 hose coolant at connector + few questions...

    Range Rover Mark III / L322
    Hi fellow forumers! How you all doing today? Hoping nobody got any issues today, haha. I know nobody likes long stories, so ill try to keep things as short as possible. Had coolant expansion tank blown on my 03 rangie with 147K miles. Towed to nearest shop. Replaced. Everything great for two...
Top