Range Rovers Forum banner
comms
1-12 of 54 Results
  1. Range Rover Mark III / L322
    Hello everyone, good afternoon, before I get into details about the issue I am facing, let me tell you that I just changed from japanese vehicle to UK vehicle, and the vehicle I decide to change was my wife´s vehicle (go figure now the pressure I am in) the vehicle is a Range Rover L322 HSE...
  2. Range Rover Mark III / L322
    Is there a way to check internal monitors with All Comms? I recently cleared the check engine light, and wondering how long I need to drive till I can get it smogged. Trying to avoid buying yet another code scanner.
  3. Range Rover Mark III / L322
    Just brought an ALLCOMMS from RWS to try to reset the EAS module. It wont read it so changed the EAS unit and still wont read it ( was a second hand unit). It also wont read the BeCME body control unit as well so no sure if that is RS as well. Originally the air suspension went down and the...
  4. Range Rover Mark III / L322
    On my 2003 RR, I got an "Air Suspension Inactive" while driving, and noticed what seems like almost a girding feel coming from the front. After arriving home and parking the car overnight, the front right corner is sitting 1.5" lower in ride height than all other corners, after I measured each...
  5. Range Rover Mark III / L322
    Need to reprogram a used BCM for a 2003 RR
  6. Range Rover Mark III / L322
    Hi. Looking for a repair shop in Northern NJ/NYC with an All Comms tool. Had read in some other posts that the heavy steering problem I am having may be solved by clearing faults from the BCM. Figured I would try before paying to replace the BCM and/or servotronic valve. Also, if clearing...
  7. Range Rover Mark III / L322
    I am trying to identify the "ABS Return Pump" in RAVE. Below is the Brake Hydraulic Circuit Diagram. I see the following possibilities: -Pre charge pump motor -ABS Pump Motor -ABS Pump What specifically would I need to replace to get rid of this fault? Could this fault by itself be...
  8. Range Rover Mark III / L322
    Hi Guys, I am trying to diagnose my dash lights (currently Air Suspension Inactive, HSC Inactive, DSC light, Brake light, & ABS light). I hooked up the All Comms on Saturday and cleared all the faults I could find. All of the lights/error messages went away. I took the truck for a ride on...
  9. Range Rover Mark III / L322
    I have a 2005 HSE. I was checking the fault codes on it using RSW All Comms. One of the faults that came up when checking M62 Engine codes was Rough Road Detection Fault. Any idea what this means? My air suspension raises and lowers fine. However I've noticed that my rover does seem to...
  10. Range Rover Mark III / L322
    Hello, does anyone know how to interpret the data I received here... Front left: 24576 Front right: 5 Rear left: 0 Rear Right: 6144 Does this mean my rear left ride height sensor is faulty. Also does anyone know why the values are all so different? Thanks in advance, Sent from AutoGuide.com...
  11. Range Rover Mark III / L322
    Anyone near the Chattanooga area have an EAS reader? I need to red/reset my codes to see what the heck is going on. The ride height selector lights aren't on now and thinking it's in hard fault mode.
  12. Diagnostic Equipment
    hi, could anyone tell me their experience of the rsw all comms tool as im about to purchase one from them, was going to buy the britpart EAS control but dont like the fact its vin locked or that its reliant on the cluster screen seeing as i have afew pixels missing, thanks
1-12 of 54 Results
Top