2008 RR SC
4 new bags
4 new sensors
Keeps throwing codes:
C1A36-01 Exhaust Valve (Permanent)
C1A07-62 Cross Articulation (Permanent)
After driving approx 1/2 mile I get "Suspension System Fault" and it dumps me to the bump stops.
Bought the iLand app and dongle from...
Hello everyone, does anybody know how to calibrate transfer case gears when installing a new shift motor.
My confusion is about the position of the gear that is moving the fork, and how to put it in correct timing.
I've read a previous thread regarding this issue but in my case the problem would not resolve itself.
Noticed the 'normal' ride height was a smidge high so I decided to re-calibrate.
The first time was fine, however the front was a tad higher than the rear so I decided to try again...
Hi, I bought 2006 Range Rover couple weeks ago. I noticed that the rear right height sensor is bad because on the off-road screen I see the wheel is sometimes off high or off low.
So I changed the rear right height sensor with new one. Now on my off-road screen I see the wheel is off low.
I just noticed under the 4x4 menu that the car gives altitude readings. However, my car is consistently reading about 100 feet below the actual altitudes for any given area. For example, my home is ~ 150' above sea level but the car tells me that we are ~45' above sea level.
I don't live on...
Air suspension inactive, replaced air strut, shop say's it canno calibrate it
2 months ago my left front air strut went out so I took it to a shop for it to be replaced, I had to come back a couple of times(3) because my air suspension height wasn't right it was either too high or too low. last...
New to the group and we are trying to solve a suspension problem on a 2003 Range Rover. We bought it at auction with 2 blown front air bags. We replaced with 2 rebuilt from Arnott. After installation, the left front corner is about 3 or 4 inches higher than any of the other corners. it...
I got an amber warning advising there was a suspension fault on my 2007 Range Rove Sport SE, diesel. I brought it to my local Range Rover dealer. They put it on the diagnostic machine and they informed me the left and right front height sensors were faulty and needed to be replaced.
I left it...
HELP!! front very low, back very high wont calibrate..... and no air suspension code
so i decided to get rid of my loweing links and drop it by calibrating the suspension.
problem was that i calibrated while one of the front lowering links had swung the opposite way.
now my truck is sitting...