RangeRovers.net Forum banner

bushings

  1. Range Rover Sport / L320
    Hello, Can someone assist me in figuring out how many bushings there are in the Suspension? I want to order a complete set but am having trouble finding information on where all the bushings are located. I know the Control Arms have bushings. I believe 8? Then 4 on the Sway Bars. I think...
  2. Range Rover Mark III / L322
    I finally got my 2010 supercharged into the mountains for some challenging trails. It did spectacular. With a good set of oversized offroad tires and some added protection underneath it can get me anywhere I want to go. It does, however, need to have the suspension refreshed. There is a bit of...
  3. Range Rover Sport / L320
    Just want to share with you guys on my past weekend project. Over the weekend i replaced the front and rear sway bar bushing with polyurethane bushing from lucky 8. The factory rubber bushing was creaking and knocking badly. (The vehicle bushings was replaced by the dealer 3 times already) I...
  4. Range Rover Sport / L320
    Dealer says my control arm bushings need replacement at 68,000 miles. 2013 RRS purchase with 53,000 miles with Factory Certified Warranty. Shouldn't the Control Arm Bushings have been replaced under the Warranty? Seems like Bushings should have been replaced when car was Certified at 53,000...
  5. Range Rover Mark III / L322
    I keep reading that the sway bar/stabilizer bar bushings on the L322 full size are not replacement by themselves as they're apart of the entire bar unit and must be replaced together. Is this just the earlier models? I have a 2008 and I was able to buy the sway bar bushings separately, although...
  6. Atlantic British
    This Weekend Save On Polybush Sets And Kits With Atlantic British!
  7. Atlantic British
    Today And Tomorrow Save On Polybush Sets And Kits At RoverParts.com!
  8. Range Rover Classic
    Ok time to replace all the bushings in my 88 RRC. I figure I want to go with poly, anyone have any experience with these guys, and this kit? https://floflex.co.uk/product/land-rover-discovery-1-range-rover-1986-full-suspension-chassis-bush-kit/
  9. Range Rover Sport / L320
    Does anyone have recommendations for an aftermarket brand that’s equal or better quality than the Genuine Land Rover Sway Bar Bushings and End Links? I’ve seen a lot of these parts from Eurospare, Centric, Febest, Moog, Britpart, Mevotech, Lemfoerder. Etc.. The Genuine Land Rover branded are...
  10. Range Rover Sport / L320
    Hi just bought oem front/rear sway bar bushings for my 2007 RRS HSE 4.4 (regular suspension) Two years ago bought the cheapest bushings on ebay (front & rear) and handling improved but after few months was back to feel very loose Lesson learned, this time want to install the oem with correct...
  11. Atlantic British
    This Weekend Save On In-Stock Control Arm Parts And Kits With Atlantic British!
  12. Range Rover Mark III / L322
    I am a proud owner of a 2008 RR HSE with 137000 miles. No major issues except for front air strut that needed replacement. Over the last two months when driving over small bumps at low speed, I feel that there is some noise coming from the front end... I believe that this has something to do...
  13. Range Rover Sport / L320
    For those of you that are like me and hate the tiny differences in the pictures we see on the net when trying to purchase Genuine Land Rover parts, here are some pics and the price I pad CDN for my 2010 Range Rover Sport Supercharged. Hope this helps P.S. That little notch in the middle just...
  14. Range Rover Sport / L320
    Hi All, My MY12 needs the pair of front air struts replaced because it's leaking air and the control arm bushings are making noise. Now my extended warranty has shafted me and denied the air struts claim because I swapped out the factory wheels with 22s which are 4% bigger than oem but are...
  15. Range Rover Sport / L320
    Hey guys to change the rear sway bar bushings would I need to have the entire back end jacked up or can I do it by just jacking up one corner at a time?
  16. Range Rover Sport / L320
    So I wanted to get rid of the clunking sounds over small bumps on the road- Replacing the passenger side was pretty easy, but the driver's side top nut was... quite a peach. Combination of multiple 12 point 18mm wrenches, then a shallow 19mm socket and extensions I was able to get it out and...
  17. Range Rover Mark III / L322
    When you torque the bolts down, do you leave the jack under the lower control arm? Or are you supposed to lower the jack so that it is no longer supporting the lower control arm before torquing down? I looked at RAVE and it says the lower bolt can be torqued down while the lower control arm...
  18. Range Rover Mark III / L322
    I am servicing the sway bar link bushings and would like to include in the service the anti roll bar bushings, however, cannot get a part # for these. Looked over the RAVE and nothing there either. Any thoughts as to the part #? Regards Lou
  19. Range Rover Sport / L320
    Got a quote to replace the front lower control arms (LCAs) and front sway bar bushings with new parts from a local indie shop here in Nebraska. They were very knowledgeable about the Sport (owner's wife has one apparently) and I was in agreement with his recommendations. He told me it would be...
  20. Range Rover Mark III / L322
    Hello all, Ive been chasing down an annoying clunk and the last option it can be is the sway bar bushings/end links. I've replaced upper control arms, lower control arms, tie rod ends, and ball joints. Steering feels tight and the only think I hear is a clunk over uneven pavement and its driving...
Top