brembo

I'm comng up on my first brake replacement on a fullsize 2010 RR HSE 5.0 (non s/c). My truck did NOT come with the Brembo package. I do a lot of heavy towing (pulling 8k lb trailer) wth this truck, so I was looking for the best braking solution I could get in terms of wear/rotor life and...

I finally got my rotors for the 2004 Range Rover . They are BREMBO 08.8554.21 (rear) and BREMBO 09.8555.21 (front). I have attached pics. I have a quick question. The rears seem to have a grey paint around the hat and the front does not. They are both UV coated. I was expecting them to look the...

Is changing Brembo brake pads any different from a standard set of calipers? Any tips or advice is appreciated

I have a 2012 RRS TD3.0, and decide to upgrade to Brembo GT brake (380mm disk, J caliper). Unfortunately original rim (19*9J) cannot hold new caliper ("A" number's smaller than Brembo required), so I ordered a new set of 20" rim. Question's: will the original spare wheel (19" rim with 175/80/19...

Just wanted to check with some of you pros before I made a decision. I have a 2008 RRSC with the brembo calipers. I did a brake job and everything was great up to the point that the bleeder broke and no matter what I tried, I could not drill out the broken threads. Eventually was able to get...

Brembo Brakes - Is that a grease point on top of the caliper? I've got a 2008 RRS SC and yesterday when I was detailing the wheels I noticed what looks like a grease point at the highest point on the caliper. Its covered by a black plastic cap. I've seen it before but never questioned it until...

Can someone tell me how much life (in percentage) or how many miles you think are left on these pads? I'm doing a full fluid flush this weekend and am debating changing pads and rotors as well.

I am not able to get either of the brake pad pins to budge on drivers side. Passenger side slid right out? I sprayed some penetraing lube spray on the but still they will not budge? Any ideas on how to get them out? Sorta need this back on the road today! Thanks in advance for the help! 2008...

Hi folks, I am planning to change the front rotors and pads. Does anybody know what is the torque spec for 2 brembo calipers bolts?? Do I need to apply permatex thread lock for the mounting bolts? Is there instruction for front rotor replacement? I did a search and only found rear rotor...

Bought a used 2004 l322 , all new custom painted Rolls Orange, 22 wheels,upgraded 2010 front rear lights, all new black Badges, some chrome, all new Upholstery napa leather Orange interior, need to fit Brembo 4 pot front Calipers waiting to fix them.

I've searched and the threads really didn't have a solid details on exactly what I will need to upgrade my hse to supercharged Brembo calipers up front

I have a 2006 Range Rover Sport Supercharge with the 4 piston Brembo front calipers. One of the 4 bolts (star head) that holds the caliper halfs together has a stripped head and I would like to replace but I am struggling to find a place to locate a replacement bolt. Does anyone know where I...

The paint on my Brembo brake callipers is fading and I want to color them black again but I don't want to lose the Brembo logo. Has anyone experience with this?

So I completed the full upgrade to the Brembo calipers/rotors/brake booster that's found on the supercharged models but have since noticed that, while less force is needed to push the brakes to make the car stop, the pedal travel is longer. It almost feels like there's an air bubble trapped...

Does anyone know where I can get replacement Brembo Brakes and Rotors for my Full Size Supercharged? The dealer wants $1,800.00+ and I'm trying to save a few bucks and do it myself! They want almost $1,200.00 for the pads, rotors and sensors...all the way around! Whew.... Any ideas?

Just got mine back from powdercoating but they seem to have lost/misplaced the caliper weights bolted to the back of the caliper. Anyone know where I can find a replacement set? I haven't seen any parts websites list that piece as separate. Thanks!

Another question about the Brembo calipers on the supercharged '06-'09 sports, I plan on getting mine powdercoated and will need to put the Brembo logo back on. Do y'all recommend getting stencils and then painting in the logo with a brush to match the factory logo? Can someone measure how large...

Just got my '06-'09 supercharged calipers in from an ebay auction I won, great condition, very excited to put them on. Few things though, they were a little knicked from the way they were packed (rubbing each other in the box, not wrapped individually) and the matte grey finish is kind of rubbed...

Hi Guys, I have a friend that has a 06 Sport HSE. He wants to put the Brembo brakes on it. The dealer told us that the Brembo brakes just bolt right up. So we ordered everything up and needless to say...that is not the case. Does anyone know what we need to make the conversion? I don't feel...