RangeRovers.net Forum banner

bottom

  1. Range Rover Mark II / P38
    Greetings all on this auspicious weekend. I would like to reverse the aging process of my driver and passenger seat bottoms, they have the usual wear on the outside from climbing in and out. So if I flip them, the outside of the passenger would become the inside of the driver, and so forth...
  2. Range Rover Mark III / L322
    Hello everybody, my RR2004 doesnt blow any heat out of the foot vents. It works with the two other settings, but having cold feet in winter while driving is not really pleasant. Any idea what could cause that issue? Thanks
  3. Range Rover Mark IV / L405
    The lower part of the tailgate on my 2013 Vogue SE is not closing with enough force to properly catch. In turn, this prevents the upper part of the tailgate closing. On first attempt top part bleeps and re-opens, on second attempt it closes but the 'tailgate open' light comes on and vehicle...
  4. Range Rover Sport II / L494
    2014 RRSport: Has anyone replaced the leather cover on the bottom of their drivers seat? If so, whats the best way to remove the seat cushion bottom so the leather cover can be replaced? Does the entire seat need to be removed from the vehicle to remove the cover?? Any help would be greatly...
  5. Range Rover Sport II / L494
    Hello All, I think this was discussed before, but Im posting my seat pic, just wanted to compare the wear with others, kind of looks loose, I have a 14 Cayenne and 13' 911 both have more miles cayenne 70k miles since new and seat looks brand new, of course different vehicle and leather but the...
  6. Range Rover Sport II / L494
    Has anyone replaced the seat cushion cover on a 2014+ RR Sport ? A walkthrough would be great but looks like the side switch panel needs to come off....hoped to be able to r/r it without removing the seat from the vehicle anyone have an experience with this ?
  7. Range Rover Mark II / P38
    Looked at p38 2001 4.6 last night, all was ok until I looked at the expansion tank and noticed water sort of flowing into the bottom of it through a small tube. It wasn't bubbling more of water just being circulated. Is that normal for these systems?
  8. Range Rover Mark III / L322
    Is this a blown amp? One day I was driving picked up my dad, we ate lunch, dropped him off and when I turned it back on it was like that.
  9. Range Rover Mark II / P38
    Hello Gents, The trim that runs along the bottom of the rear windshield on my P38 had been loose since I bought it and, while going through the car wash, it was pulled off, and then run over by the car behind me. The manager retrieved the part but it couldn't be saved. They were generous...
  10. Range Rover Mark III / L322
    Anyone else have this problem where the bottom left quadrant of the windshield, right in front of the driver (for USA folks) never gets exposed to any washer fluid? This happens because the nozzle shoots the washer fluid in a jet-like stream and it's aimed towards the top of the windshield and...
  11. Range Rover Sport / L320
    Hey Guys, Quick question for my new to me 06 RRS SC The drivers's seat bottom has a crack in the side vynil on the outer edge - probably due to constant entry / exit wear. I know the cushions are removeable with 4 torx screws, my wonder is are they interchangeable l-r? That way I could hide...
  12. Range Rover Mark II / P38
    Fitting some new front shocks - here it is pictured as it came in the box. Looking at the RAVE file it looks like I should rotate the metal washer at the top and bottom so the "peak" of the cone is against the rubber. Is that correct please? The diagram is not the clearest and I am not sure why...
  13. Range Rover Mark III / L322
    changing the radiator on this 2003 range rover. the job is easy enough until you try to push the two soft wires coming out of this coolant sensor back into the two holes. Can someone please point me in the right direction?
  14. Range Rover Mark II / P38
    Hi i live in spain and because of the heat all four of my ball joint rubbers have perished.i have tested the joints and they have no play in them.To replace all four joints is a massive job just because the rubbers have gone.Has anyone any bright ideas to say me time and money,mainly time and...
  15. Range Rover Mark II / P38
    Hi, got a bit of a mind-boggle, I've got P38 V8 4.6 its a lovely motor, but since Sunday she stared to make some loud noise - what I can hear is like a banging into an oil sump, but this happens only when IDLE, when you rev up, it goes away, coming back when stationary, it doesn't matter if the...
  16. Range Rover Sport II / L494
    Cargo Net for Side of Trunk (Not Bottom) or a way to use the small cubby area?? I've read where some have wanted a cargo net for the trunk to attach on the side (not bottom). Wondered if anyone found something like this or decided to rig it? I would love a place to throw small things so they...
  17. Range Rover Mark III / L322
    Hello, Trying to remove front right side air strut assembly, but unable to remove lower strut bolts from hub/knuckle. I was able to remove the nuts but not the bolts. Are these threaded all the way to the head? Would these need to be heated? I've sprayed with super penetration spray banged the...
  18. Range Rover Mark III / L322
    Just bought my 11 RR last week and the oil was overfilled. I removed about 2/3 of a quart before the level was corrected and let the bottle sit on my garage floor until I could properly dispose of it. I noticed today there's some white sediment sitting in the bottom of it. Dealer claims the...
  19. Range Rover Sport / L320
    Was thinking about having the bottom back moldings painted or wrapped to mach the paint color, has anyone done this before? Any recommendations on paint vs wrapping it? Thanks for the info.
  20. New Member Introductions
    It's me Shazz Just purchased my dream car 2008 Range Rover Supercharged ALL Black everything!!!
Top