RangeRovers.net Forum banner

bearing

  1. Front Axle Woes.

    Range Rover Mark II / P38
    So, its a 1997 AA Yellow 4.6 HSE Vitesse. I am very attached to this vehicle, and have been keeping it in the best running condition I can. However, the front axle has been making noises similar to the old army truck axles where the ring and pinion don't mesh properly. The difference is, If I...
  2. Rear Propeller Shaft Center Bearing failure

    Range Rover Sport / L320
    Hello All: I haven't posted in a while, so I thought I'd pose questions/thoughts to those who have had this problem, or are having it now. I have been driving with this rear propeller shaft center bearing surround failure for quite a while now, simply not accelerating hard to avoid the...
  3. ZF5P24 bad bearing and broken seal issue

    Range Rover Mark III / L322
    Hello, looking for some help with my issue. So I picked up a 2004 gasoline powered L322 RR for a great deal. She's a real beauty, however she has slipping transmission when hot and P0732 code. Shifts through the gears just fine when cold but pretty quickly when it gets warm it will slip in...
  4. Replacing crankshaft & bearing

    Range Rover Mark III / L322
    I have a 2008 Range Rover 4.2L Supercharged with 140,000 miles. Recently there was a loud knock coming from the lower engine. After removing the engine and inspecting I found that car had spun a bearing on one of the con rods. Inspected the entire engine and there is no other damage other...
  5. Bearing or Tire noise

    Range Rover Sport II / L494
    Hi Everyone, I have a weird noise coming from the car usually when I’m driving above about 30mph. It’s hard to explain what kind of noise it is, but to me it seems like bearing are bad. The dealer is telling me that the tire threads are not aligned, but the tires are in good condition. He said...
  6. 2.5 diesel diff bearing

    Range Rover Mark II / P38
    Hi guy's, I think I've got a front diff bearing gone (where the propshaft attaches) Has anyone done one & how easy was it? Can i do it without taking the diff off? Any pointers & ideas Many thanks in advance
  7. Front wheel bearing assembly 2005 Vogue

    Range Rover Mark III / L322
    Can someone tell me if an L320 wheel bearing hub assembly is identical to an L322? Thanks Jon
  8. Front Hub Bearing Puller Tool

    Range Rover Sport / L320
    All, I have access to a rack/lift to replace a front wheel hub. Problem is the rack owner has told me I have to bring my own tools (no problem) and all of the tools in his shop manual. He specifically asked me if I have the special "Range Rover Hub Bearing Puller" tool. I said I did not. So...
  9. M62 Crankshaft/ Rod Bearing Replacement

    Range Rover Mark III / L322
    I've searched high and low on the internet and haven't found much on the topic. I have a 2003 Land Rover, Range Rover, HSE, BMW 4.4L V8 with 104k; that's showing signs of worn bearings ( rough shaking Idle, metal bearing fragments in the oil, and the lovely STOP! LOW OIL PRESSURE LIGHT) I'd...
  10. Help re replacement of rear hub bearing on 2004 RR

    Range Rover Mark III / L322
    I have tried to do research on changing the rear hub bearing but have found very little specific info. Of interest is that the right rear is the one to go as per our master tech and ours fits that exact category. When turning left and loading the right side the noise is quite loud but seems...
  11. Front cover, bearing torque, transmission question

    Range Rover Mark II / P38
    Hey guys first post. I was wondering about the valves in the front cover. I bought a 97 range rover 4.0 for 400 to play with. It was listed as bad rear main seal. I decided to pull the engine and rebuild it. I have the front cover off and everything looks good I cleaned it up real good and I...
  12. '92 RRC (passenger side) stub axle bearing issue

    Range Rover Classic
    Hello everyone, (first post) I am rebuilding the front axle of my 92 RRC (without ABS brakes, with vented rotors, with CV joint suffix "B"). Vin # ending in 1240NA. I'm told that a '92 without ABS brakes is somewhat of an anomaly. When dis-assembled, there was a "sleeve" bearing/bushing that...
  13. Front Wheel Hub & Bearing Assembly Source

    Range Rover Mark III / L322
    I have a 2007 RR HSE 4.4 and am in the process of changing the front wheel hubs and bearings. Looking online I am not having much luck locating the assembly as unit. Does anyone know of remanufactured or refurbished assemblies for this model year? The hub itself looks to be part LR009816 but...
  14. Water leak, rod bearing change question.

    Range Rover Mark II / P38
    I have all of the parts necessary to replace the timing cover to block gasket on my 1977 4.6 P38. Since I have to pull the oil pan to accomplish this task, I have a question. The Range Rover has 173000 miles on it. There is a very light no load knock (only I seem to be able to hear this) when...
  15. Replacing Rear Wheel Hub & Bearing - Find Tools & Advice -

    Range Rover Mark III / L322
    Replacing Rear Wheel Hub & Bearing - Find Tools & Advice - I'm a DIY mechanic and tackle pretty much anything that comes my way. The thought of going to the dealer, with anything but a bumper to bumper warranty, makes me cringe. I'm mid way through a real wheel hub and bearing replacement and...
  16. 2006 L322 Front wheel bearing.

    Range Rover Mark III / L322
    Hi Guys. Could anyone tell me if the front wheel bearing replacements that are available for the l322 are the same as P38's in as much as the cheaper ones are ball type bearing races (that seem to fail prematurely) rather than the correct type which should be roller type races or are they all...
  17. Changing center bearing on propshaft

    Range Rover Sport / L320
    Hello! Yesterday I've changed the center bearing of my propshaft (4h all in all) because I had the juddering in the transmission and the rubber of the bearing was not really good anymore. While doing this i have recognized that the Rzeppa joint near the center beering is moving not really...
  18. Rear wheel bearing race removal

    Range Rover Classic
    Just planning out the replacement of my rear wheel bearings while I have the hubs off for disc/caliper replacement, and I was wondering about the removal of the inner race from the hubs. Will I need an internal puller to get these out, or do they come out easily, maybe by tapping them from the...
  19. rear hub bearing replacement?

    Range Rover Sport / L320
    All, This seems like the best place for this. On Thursday I went outside and walked around the 08SC and saw that both back tires look similar to this picture: I got super busy, took the wife's car and ran my errands. Her being the great wife goes out and gets me a full set of tires...
  20. Camshaft bearing tool...

    Range Rover Mark II / P38
    ...morning All, Bit of a long shot... Does anyone in the UK have a set of camshaft bearing tools that I could borrow/hire, or even a Lisle 18000, to remove and fit the bearings on a 4.6 V8? I missed out on a set on ebay over the weekend, and that's rather buggered me up. :? Many thanks Tim
Top