RangeRovers.net Forum banner

bay

  1. Engine Bay Fuse #7 Help

    Range Rover Mark III / L322
    2008 L322 HSE Naturally aspirated. So fuse 7 keeps blowing in my engine bay fuse box. Does anybody have a wiring diagram for this circuit? Background info: So last black Friday fuse 7 blew, okay no bid deal I replace it and all is good. Weird thing was and this could just be coincidence...
  2. Mystery Wires in Right Front Engine Bay

    Range Rover Mark II / P38
    Hey there, Anyone know what this plugs into? Its in the right from corner of the engine bay behind the battery container. 2000 Range Rover 4.6 HSE. Thanks, M
  3. Smoke from engine bay at cold start

    Range Rover Mark IV / L405
    Hello guys, I own a 2013 L405 4.4V8 Diesel, very happy with the machine so far, now I'm having a strange smoke that smells to Diesel on cold starts, I start the engine, let it warm and suddenly it starts to smoke inside the engine bay, here's some pics. Anyone have a a clue on what should I be...
  4. 1997 2.5 DSE Auto - LHD, identifying engine bay pipe

    Range Rover Mark II / P38
    Hi all, I’m looking to identify a pipe within the engine bay. Per the title it’s a ‘97 LHD diesel. To describe it, the pipe is black and exits the bulkhead right behind the the rocker cover. It then goes down and disappears behind what would be the cylinder head but I cannot see where to. I...
  5. Mystery Plug In Engine Bay

    Range Rover Classic
    This plug is near the washer bottle - I never unplugged anything so any ideas where it might go or what optional kit it may have run?
  6. Bad connector under in engine bay preventing start - fixed

    Range Rover Classic
    I tried to start her up to drive to work this morning. Fired up fine but cut out when I switched on the lights and would not restart. I assumed flooding so took a different car. On closer inspection this evening I noticed that the dash ignition lights were not lit so I guessed a fuse had blown...
  7. Smoke from the engine bay

    Range Rover Sport / L320
    stopped at gas station and opened the hood, engine running - there is a smoke being puffed on the right side (LHD) passenger side. Anyone has a clue to what it might be - smells "dieselly". https://www.youtube.com/watch?v=tBUFBJ9wsVY Any clue???
  8. Hello from SF Bay Area

    New Member Introductions
    Range Rover Evoque 2015 :thumb:
  9. Oil in spark plug bay, plus white/gray smoke on startup

    Range Rover Mark III / L322
    On initial start up it produces a white/gray smoke. Engine runs great and does not smoke at all while driving. I changed the plugs, but there was oil in the spark plug housing on both sides (seemed to be more on the passenger side). Pulled codes and the only code was "Oxygen sensor heater before...
  10. Engine bay fuse box

    Range Rover Mark II / P38
    When I bought my P38 it came with a replacement fuse box due to the one in the car being toast, and the seller said that I needed access to a Nanocom or similar to replace it as it's coded to the BCU, is this indeed the fact or was he misinformed? I want to tackle replacing it this week, but if...
  11. New member introduction from SF Bay Area

    New Member Introductions
    Hello fellow Range Rover enthusiasts, I moved to the San Fransisco South Bay Area about a year ago having moved from Melbourne, Australia via Shanghai. I have a 2007 Range Rover which I would like to use a little more off road. I'm looking forward to corresponding with and possibly meeting...
  12. Fire in the engine bay.

    Range Rover Mark II / P38
    Just thought I'd share what happened to me today.Drove to the local shopping centre with my 94yo dad, whilst reversing into a spot he yelled out there is smoke coming from under the bonnet (hood). Stopped and got out, opened the bonnet and there was a fire on the exhaust manifold cover between...
  13. Loose Hose in Engine Bay

    Range Rover Mark III / L322
    Hey Everyone! Thank you in advance for your help. I noticed I have a loose hose on the right hand side (as looking at the vehicle) of my engine block. It's an '07 HSE. Any help identifying where this should be attached to would be greatly appreciated.
  14. Need help finding a part number for support pieces in the engine bay

    Range Rover Mark III / L322
    Need help finding a part number for support pieces in the engine bay The parts numbers I'm looking for are the plastic pieces that separate the engine from the battery on the passenger side and the brake reservoir from the engine on the driver's side of the front--the two pieces act as a...
  15. Stray Connector in Engine Bay

    Range Rover Mark III / L322
    I'm finishing up the timing chain job and am stuck on the last connector. This connector is a 2-pin fuel injector style connector. It's on the end of about 4 inches of wire that comes out of the front of the wiring box above the RH valve cover. That's the box with all the coil and injector...
  16. Good indi shop for repair and wheel alignment in SF-South Bay area

    Range Rover Sport / L320
    Good indi shop for repair and wheel alignment in SF-South Bay area I have had my 2006 RRS HSE since new and it's been a pretty reliable car after warranty. After 60K mi and I am about to put on my 3rd set of tires. I would like to know if anyone can recommend a good tire/alignment shop near...
  17. Where can I buy this engine bay cover?

    Range Rover Sport / L320
    It was super cold this morning and I needed to jump start my work truck. Snapped the wrong cover off.
  18. Hello from the SF Bay Area

    New Member Introductions
    Hi Everyone. I just bought a 2014 RRS HSE 3.0L.
  19. Smoke from engine bay

    Range Rover Mark II / P38
    Hi folks I've got my engine back together and did the last part today in the rain - she started on go #3 and sounds great, no more annoying tapping sound so I know I did something right :) I havn't run it for more than a minute because some smoke started coming out of the engine on both sides...
  20. Degreasing engine bay

    Range Rover Mark II / P38
    So the engine bay is looking pretty greasy/gummy these days, and I'd like to clean it up somewhat. However I am terrified of direct water on all of those important electrical bits. Has anyone here had success, and what advice can you give? What are the chances something gets ruined? What...
Top