basic

Hi Everyone: I've decided to convert my 95 RRC from EAS to coils and I'm having trouble removing the passenger side front shock. I removed the bottom nut, but the top nut appears to just spin, although the washer under the top nut is looser (i.e., there is a gap between the top nut and the...

Probably most of you have the Harman Kardon Hifi System factory option, but my 2door model came only with the two speakers in the doors and nothing else. So there is still some room for improvement in the "Base department". I want to keep it subtle to maintain the vintage look of the RR, has one...

I posted quite a while back about getting a RR HSE. I listened and looked for a clean 2007+. Found a 2008, one owner, only serviced at one dealer, with 94k. More miles than I wanted but my friend worked at the dealer it was traded in to and was able to talk to someone into selling it to me...

Hi, I have a 1996 RR DSE 2.5L with something more than 300,000 km on the clock. It won't start, and my local helper is too busy to give a prompt response. I think I have narrowed the problems down to two areas. 1. (a) The fuel lift pump in the tank which I have good reason to suspect has been...

I purchased my first ever RR last night, 3.0 TD6 vougue and im in love with it. I has the Sat nav and DSP. CD Changer is in the glove box. I want to add my ipod classic to the system some how. I have searched the forum but there are masses of info and im getting lost and confused. I have a...

Hello all, Here are some easy questions. I've read the section in the handbook relating the Air Con and my understanding is that when the the light is on then the Air Con is off. This appears to be right as this the only setting that allows the fan to be completely switched of...

Good evening those wiser than I in all things P38! Okay, where do I start with this one? Those of you who read my intro will know that I'm not particularly gifted where spanners and socket sets are concerned...but in these times of austerity, it very much is a case if you don't have a go...

What's the most basic tool for reading/clearing codes for a P38? I've read about all the full function setups available, and the most basic generic code readers, but can anyone suggest the most basic reader that will also clear codes? I have a OBDII interface module with a serial cable that I...

I am installing an Autometer electric temp gauge and have read that a heater hose adapter is a good place to install the sensor. If this is correct which heater hose would I install the adapter? Any recommendations on adapters? Thanks in advance.

Electrical Issues - Basic Troubleshooting Guide Information compiled by Greg Hind (p38a Forum) Greg kindly put this post together a while back. It's proved to be invaluable for members in the p38 forum and so it's been re-jigged for use in the other Range Rover forums. Since every week there...

Electrical Issues - Basic Troubleshooting Guide Information compiled by Greg Hind (p38a Forum) Greg kindly put this post together a while back. It's proved to be invaluable for members in the p38 forum and so it's been re-jigged for use in the other Range Rover forums. Since every week there...