RangeRovers.net Forum banner

bar

  1. Lightbar mounting on standard front bar of 2012 AB

    Range Rover Mark III / L322
    Hi all, I'm in the market for a 2012 Autobiography, and wonder if anyone has mounted a lightbar to the front of one of them. I want to keep the original front bumper, and only mount a lightbar and hidden winch. I'm particularly interested in the overall width of the bar used. Thanks
  2. 2010 tow bar electrics problem

    Range Rover Mark III / L322
    Hello My name is Dominik, I live in Poland and I am a great Range Rover lover. I have just switched from the 2006 HSE 4.4 petrol to the 2010 HSE 5.0 petrol and my first problem is the towing electrics. This is the 2010 model year, so there is no module - only gray plug near the spare wheel...
  3. ARB Bull Bar for Disco 2 on P38?

    Range Rover Mark II / P38
    So quite a few threads that this is doable, but any forum members put one on? Or any aftermarket (aside from Terrafirma) that is actually currently avail in the US? 4x4 in Poland can ship one over, for about the same price as the ARB domestically....but wondering if other options are actually...
  4. Bull bar light bar install question

    Range Rover Mark II / P38
    I finally was able to source the metal bar that attaches onto the middle section of the factory bull bar to be able to install 2 Hella lights. It looks like I will need to cut some of the outer foam so the bar lays flat against the surface where the bolts attach it to the bull bar. (one bolt on...
  5. Anti roll bar leak

    Range Rover Sport / L320
    Had the car two days it’s a 2006 Range Rover Sport 2.7 and noticed a pool of oil underneath on the driveway, narrowed it down to what looks like the anti roll bar actuator leaking. Is this a serviceable part ?
  6. 2015 Full Size Supercharged- Tow Bar Options

    Range Rover Mark IV / L405
    I need to pull a small utility trailer. My RR did not come equipped with a factory tow bar. What are my best options? If factory $2800 my only choice? thanks in advance.
  7. 2008 L322 Sway Bar Bushings

    Range Rover Mark III / L322
    I keep reading that the sway bar/stabilizer bar bushings on the L322 full size are not replacement by themselves as they're apart of the entire bar unit and must be replaced together. Is this just the earlier models? I have a 2008 and I was able to buy the sway bar bushings separately, although...
  8. Tow bar install Sydney Australia

    Range Rover Sport II / L494
    I'm looking to install a tow bar on my 2017 sport. Can anyone recommend if I should organise through the LR dealer or third party. I've been told if I go through the dealer then I would get advance tow assist. But I'm finding that not everything is compatible with every range rover. Any...
  9. LED bar wiring

    Range Rover Sport / L320
    I recently got a slim 30" light bar and mounted it behind the grill. Sweet! now for the hard part: wiring (or what I thought would be the easy part...) I received a relay kit with a standard 2"x1" rocker switch but I'm not sure I'll use the switch. For one, its the switch is rather large and...
  10. Where To Purchase Extended Tow Bar For 2010

    Range Rover Mark III / L322
    We have used an "extension" on our standard tow bar for light towing (to get past that BIG bumper) but for heavier towing assume we should get a single piece tow bar - any recommendations from someone who has purchased one to assure the length is correct? Thanks!!
  11. Swan neck tow bar

    Range Rover Mark II / P38
    I have what I assume must be the standard P38 swan-necked tow bar on my RR. I can remove the massive M20? bolt easily enough, but then like most things on the back end of this vehicle new to me it does not want to move. From what I can see in photos it was just the main bolt holding it in, with...
  12. Sway Bar Bushings and End Links manufacturers question

    Range Rover Sport / L320
    Does anyone have recommendations for an aftermarket brand that’s equal or better quality than the Genuine Land Rover Sway Bar Bushings and End Links? I’ve seen a lot of these parts from Eurospare, Centric, Febest, Moog, Britpart, Mevotech, Lemfoerder. Etc.. The Genuine Land Rover branded are...
  13. Hi, need torque for front/rear sway bar bushings?, thanks

    Range Rover Sport / L320
    Hi just bought oem front/rear sway bar bushings for my 2007 RRS HSE 4.4 (regular suspension) Two years ago bought the cheapest bushings on ebay (front & rear) and handling improved but after few months was back to feel very loose Lesson learned, this time want to install the oem with correct...
  14. Front Stabilizer Bar

    Range Rover Sport / L320
    Hello there, Got a diagnostic done and was told that I need to get this replaced. Got some squeezing going on driving. HATE this noise. -:) They priced me at 2k but found the part on a "junk yard" land rover site for $100. At least I think I have. How can I be sure to get the correct part...
  15. Corroded sway bar bolts 13 RRS SC

    Range Rover Sport / L320
    Has anyone had this issue? The bolts that hold the sway bar are corroded and will not come off. They have been heated, oiled, lubed, everything. I have had 2 places tell me my only option is to remove the engine or drop the subframe. Engine removal is not an option as I am not dumping 4k for a...
  16. steering box / tie bar help needed

    Range Rover Classic
    I pulled the steering box out of my 94 lwb rr classic and put a new seal kit in it. I put the seal kit in with no hiccups. However, when I was putting it back on yesterday I seem to have misplaced the bushing or spacer that goes on the tie bar as it gets installed. I cant find either a part...
  17. Fog lights / Light bar install

    Range Rover Mark IV / L405
    looking for any suggestions and or examples of fog light installations or light bars on a 2015 range rover hse or similar , looking to add some yellow fogs , thanks!
  18. 2011 l322 trailer tow bar install

    Range Rover Mark III / L322
    Installed trailer tow bar/receiver on my 2011 full size Range Rover l322 s/c today. Not a lot of fun but not terrible either. Did not have to remove rear tail lights. I did have to remove the stowage trays on either side of the spare tire to access the nuts for the bumper bar. Here are some...
  19. Tow bar tongue...length and drop

    Range Rover Mark IV / L405
    I have not towed yet with my truck...on my L322 it took me a bit to find the right length and drop for the tongue....for the L405, where have people found a reasonably priced tongue and what were the specs...also, I assume the plug is set up for plug and play, and no adaptor is needed esp for a...
  20. underride protection bar

    Range Rover Classic
    Is this part stock fitment or was it optional?
Top