Search Results for ‘arms’

Although my engine is now in bits (head gasket blown at no 7 to outside) I'm optimistically turning my thoughts to the front suspension. Does anyone know who does radius arms on an exchange basis in the UK. My RR came with some silly orange PU bushes on the radius arms that I want to return to...

Anyone had experience with aftermarket steel rocker arms that are offered for our engines?

Went off roading today and managed to bend the driver-side trailing arm into a "U" shape. I was curious on others experiences in replacing the trailing arms. It looks to be a very straight forward fix but we all know how those plans go.

I'm looking at replacing my rear trailing arm bushes and the manual says to raise the car on a four-post lift and depressurise air bags. My car is on coils so I can't depressurise the air bags and I don't have a four-post lift. Would it be alright to raise the chassis up, support it on some...

I am a proud owner of a 2008 RR HSE with 137000 miles. No major issues except for front air strut that needed replacement. Over the last two months when driving over small bumps at low speed, I feel that there is some noise coming from the front end... I believe that this has something to do...

If you have replaced your rocker arms have you used Genuine or some other. Would you be able to let list whether you fitted genuine or what make if not and how many miles since fitting them and any problems? Many thanks. Thought this would be a way to find out if any cheaper ones are safe to...

Not only are the bushings knackered toward the front of the vehicle on the trailing arms, the left one has a significant bend. It's no wonder my rear end is a little squirrelly. I am considering the terrafirma cranked trailing arms as replacements. Anyone here use them or have any...

I replaced the front lower and upper control arms on my 2004 HSE and now I have the Air Suspension Inactive and she's on the stops in the front. Everything worked fine before I did the front suspension work. This is what I did: 1. Car at normal height and ignition off. Battery connected. I...

2006 RRS SC. 99K Miles. I just purchased this Rover and on my extensive test drive the vehicle showed no warning lights regarding the air suspension. While I was signing all the paperwork the dealer (not a New Land Rover Dealer) replaced the control arms. This not only put it out of alignment...

Hi, I'd appreciate a 2nd opinion please I've been playing with EAS sensor arms to try and get the best out of my Arnott Gen3 bags and Terrafirma extended shocks – at present I'm running out of sensor range (EAS ECU will not accpet values beyond a specific value) and not getting the full...

Hey y'all, just thought i would share.. I had a front end clunk, seemed like it was on the right side. I figured it was upper control arms, bushings looked pretty bad; replaced both. They were originals. 140k was time for a refresh anyway. BIG improvement in stability, lean and cornering...

Making a DIY for replacing all 4 lower control arms and 4 struts. I will be tackling this project tonight on my 2007 RRS and I was wondering if anyone has any tips or things to look out for before starting. If anyone has any instructions or serious precautions like depressurizing the compressor...